avr-status

name	avr:status
version	1.0.0
description	Current system state review. Shows EQ state, last measurement, distance from target, and calibration history.
allowed-tools	["Bash","Read","Write","Edit","Glob","Grep","Agent","AskUserQuestion"]

/avr:status

Review the current state of the calibration system.

Arguments

None.

Workflow

Step 1 — Gather state

Call these MCP tools in parallel:

• get_device_state — current AVR + DSP hardware state
• get_measurement_history with limit=3 — recent measurements
• get_calibration_runs with limit=3 — recent calibration runs (the latest run's full_state_snapshot is the authoritative record of EQ/delay/gain state; the miniDSP itself is write-only)

Step 2 — Report current EQ

Show the active EQ filters on the DSP:

• Preset number
• List of filters: frequency, gain, Q, type
• Note if no filters are applied (fresh/flat state)

Step 3 — Report last measurement

If measurements exist:

• When the last measurement was taken
• Key metrics: bass extension, smoothness, average level
• If a target comparison is possible, show RMS deviation

Step 4 — Calibration history

If calibration runs exist:

• Recipe used
• Convergence status (converged or not)
• Final RMS deviation
• Number of iterations

Step 5 — Hardware state

• AVR: volume, input, mute status
• DSP: preset, source, connection status

Step 6 — Summary

One-paragraph summary: "System is calibrated to X with Y dB deviation" or "System has no active calibration. Run /avr:calibrate to start."

Important rules

1. Read-only. This skill never modifies anything.
2. Be concise. Show the important numbers, not raw data dumps.
3. Suggest next steps. If the system isn't calibrated, suggest /avr:calibrate.