video-transitions

name

video-transitions

description

Join two clips with a visible transition effect (wipe, slide, dissolve, pixelize, circle open/close, fade-to-black, etc.) using ffmpeg xfade. Use whenever the user wants a transition between shots/scenes, a scene change with an effect, or anything beyond a hard cut. For a barely-visible seam between adjacent cuts use the splice command instead; for generative effects on the footage itself use grok-video-edit.

Video transitions (ffmpeg xfade)

Join two clips with a deliberate, visible transition. This is plain ffmpeg xfade — no CLI command wraps it (it's a one-liner; only unique-code operations get commands). Use the recipe below directly.

Decide which tool first:

• Visible transition between two shots (wipe, dissolve, pixelize…) → this skill, xfade.
• A cut that feels abrupt but shouldn't have a visible effect → you want a split edit, not a transition: stagger the sound and picture with audio_lead in the EDL. Reaching for a dissolve to soften a choppy dialogue cut is the classic wrong fix — see cutting-rhythm.
• Seamless join, no visible effect (hide a hard cut) → the existing splice command (uv run video-agent splice a.mp4 b.mp4 -o out.mp4) — a fixed 0.04s crossfade.
• Effect on the footage itself (smoke, recolor, restyle) → grok-video-edit skill.

Recipe

xfade overlaps the end of clip A with the start of clip B. The offset is where the transition begins in the combined timeline = duration_of_A − transition_duration. Total output duration = dur_a + dur_b − duration.

# 1. Get clip A's real duration (offset depends on it — never guess)
uv run video-agent info a.mp4        # read the duration line, e.g. 4.000s

# 2. offset = dur_a - duration   (e.g. 4.000 - 0.6 = 3.4)
ffmpeg -y -i a.mp4 -i b.mp4 -filter_complex \
  "[0:v][1:v]xfade=transition=wipeleft:duration=0.6:offset=3.4[v];\
   [0:a][1:a]acrossfade=d=0.6:c1=tri:c2=tri[a]" \
  -map "[v]" -map "[a]" -c:v h264_videotoolbox -b:v 8M -c:a aac -ar 44100 out.mp4

Drop the [0:a][1:a]acrossfade…[a] segment and the -map "[a]" if either clip has no audio (otherwise ffmpeg errors on the missing stream).

Useful transition kinds

fade, fadeblack, fadewhite, dissolve, pixelize, wipeleft / wiperight / wipeup / wipedown, slideleft / slideright / slideup / slidedown, circleopen / circleclose, radial, smoothleft / smoothright, diagtl / diagtr / diagbl / diagbr, squeezeh / squeezev.

Full list: ffmpeg -h filter=xfade.

Gotchas

• Both inputs MUST share resolution + fps + pixel format, or xfade errors / produces garbage. Normalize clip B first if they differ:

  ffmpeg -y -i b.mp4 -vf "scale=1920:1080,fps=30,format=yuv420p" -c:v h264_videotoolbox b_norm.mp4
  

  Check both with uv run video-agent info before running.
• xfade re-encodes — always pass -c:v h264_videotoolbox (macOS). After it, any further join must use filter_complex concat, not stream-copy concat (non-keyframe seam).
• offset is computed from A's real duration — read it from info, don't assume the nominal length (trimmed clips are often a few frames off).
• duration is the overlap length, typically 0.3–1.0s. Longer than the shorter clip will fail.
• Verify the seam visually: uv run video-agent detect out.mp4 --start <offset-0.3> --end <offset+0.3> --step 1 and eyeball the grid.