xero-browser

name	xero-browser
description	General Xero browser automation notes. Use when automating any Xero page with agent-browser — covers non-standard UI patterns, waiting, and dropdown menus.

Xero Browser Automation

General notes for automating Xero with agent-browser. Load agent-browser-local alongside this skill for cross-site viewport, stale-ref, tab-safety, waiting, and widget guidance.

For Xero MCP server usage (OAuth, list-* tools, searching records by ID vs. pagination), see the separate xero-mcp skill instead.

MCP vs browser — which to use (READ FIRST)

Before any Xero data task, read ../xero-mcp/references/mcp-vs-browser.md. It is the single source of truth for choosing MCP tools vs the browser Account Transactions report (shared with the xero-mcp skill — do not duplicate its content here). Key rule: Xero MCP has no per-account transaction endpoint, so a single account's full ledger comes from the browser Account Transactions report (see "Searching Transactions By Date Range" below), never from paginating list-manual-journals.

Fiduciary Responsibility

This is accounting with fiduciary responsibility. Always stop and report any discrepancy — in amounts, dates, accounts, or anything that doesn't match expectations — rather than assuming it is "likely fine". Do not proceed past a discrepancy — surface it to the user immediately.

CRITICAL: Never delete anything in Xero without explicit user permission. This includes invoices, bills, payments, bank transactions, contacts, manual journals, attachments, reconciliations, and any other record or artifact. If deletion seems like the cleanest fix, stop and ask first.

Verifying write operations — READ THE PAGE, don't grep past the error

A click that reports ✓ Done proves nothing. agent-browser click reports success when it dispatched the click, NOT when Xero accepted the change. Xero frequently renders a refusal as ordinary page text rather than an exception, so the automation layer sees nothing wrong.

After every write (void, edit, post, reconcile, delete), you MUST:

1. Read the page unfiltered — agent-browser snapshot with NO grep, or grep that explicitly INCLUDES error|reason|locked|cannot|denied|invalid. A grep written only for the expected success text will silently filter the error out of your own view.
2. Independently confirm the new state, ideally via MCP (list-invoices invoiceNumbers=[...]) — check Status AND Last Updated. An unchanged Last Updated means the write never landed.

Never invent an explanation for a failed write before reading the page.

Evidence (2026-07-17): voiding a bill — Bill Options → Void → confirmation dialog → OK. Every click reported ✓ Done, a real dialog appeared. The bill was unchanged. The agent grepped for void|status|awaiting, saw nothing, and fabricated a stale-ref theory. Xero had rendered the actual reason on the page all along:

An error occurred for the following reason: • Your accounts are locked by your adviser up until <date>. Your action must occur after this date.

Period lock (adviser lock) — a common silent refusal

An adviser/accountant can lock the books up to a date. Any write to a record dated before that lock date is refused with the message above, no matter how correct the action is. This blocks void, edit, delete, and payment changes alike.

• Check the record's DATE against the lock before attempting a write. A bill dated in a locked period cannot be voided, full stop.
• Standard remedies, all requiring the user's decision: a credit note dated after the lock date to reverse it; asking the adviser to lift the lock; or leaving the record and adding a note explaining it.
• Do NOT retry the same write, and do NOT look for a way around the lock — it is a deliberate accounting control, not a UI bug.

Authentication / Login

The browser session must already be logged in to Xero before any of the report/automation workflows below will work. Otherwise go.xero.com simply redirects to login.xero.com.

• Browser-session login (the relevant kind here): use the agent-browser auth subcommand with the saved xero credential profile, if available. Run agent-browser auth login xero — it waits for the login form fields, fills them, and submits. (agent-browser auth list shows the available profiles; a xero profile already exists. A profile is created in the first place with agent-browser auth save.) After login, wait a few seconds for the OIDC redirect to settle, then verify with agent-browser eval "location.href" — it should land on the go.xero.com app homepage, not login.xero.com.
• Xero MCP/API auth (OAuth bearer tokens) is a separate thing, covered by the xero-mcp skill and its authentication reference. MCP-token auth is not the same as browser-session login: a fresh browser still needs its own login even when the MCP tools work.

"Access Denied" / 404 error pages mid-session → hand off to user for manual login

If, during a session, a page lands on an Akamai "Access Denied" edge-block (errors.edgesuite.net, Reference #...) or an /app/.../errors/404 page — even after a seemingly successful login — the browser session has lost its Xero auth. Do NOT try to re-auth yourself. Stop, and prompt the user to intercede and manually log in at https://login.xero.com/. Wait for them to confirm login is complete, then re-verify with eval "location.href" — it should land on go.xero.com/app/..., not login.xero.com. Do not treat these error pages as a dead end or switch to a workaround; hand off and wait.

2FA is part of this and is the user's step. Manual login usually routes through a login.xero.com/.../two-factor/authenticate page. Do NOT try to complete 2FA yourself — it is entirely the user's to do. After a successful login+2FA the URL settles on go.xero.com/app/....

Waiting

Apply the general waiting guidance from agent-browser-local. Xero's persistent background requests never reach network idle, so use a concrete state or fixed wait instead. ~3 s (wait 3000) is the ceiling, not the default — for most in-app interactions (menu open, picker toggle, snapshot after a click) 1–2 s is plenty; reserve 3 s for full report re-renders after Update. Waiting more than 3 s to "let a page settle" is overkill.

Searching Transactions By Description / Free Text

The global Xero Search bar (top nav) does NOT search manual-journal narrations. Verified 2026-05-04: searching for a hash that is the literal text of a posted journal narration returns "No results found".

To search narrations, use the Account Transactions report's Filter button instead. (The screenshots and steps below assume the standard Account Transactions report under Reporting. If you have a saved custom variant — e.g. with grouping disabled and extra columns added — use that instead; the workflow is identical.)

Workflow

1. Navigate to https://go.xero.com/app/dashboard, then Reporting → Account Transactions. Wait for the report to render.
2. (Optional) Expand to all 202 accounts via the Accounts picker if you want a global narration search rather than one constrained to a few accounts. See "Searching Transactions By Date Range" below.
3. Click the Filter button in the toolbar.
4. In the Filter dialog, the Description row is initially collapsed and its inner Contains textbox does not yet exist in the snapshot. Click on the Description row generic (e.g. generic "Description" [ref=eN] or, if a filter is already active, generic "Description0xprefix..." [ref=eN]) to expand it. After expanding, re-snapshot — a textbox "Contains" [ref=eM] now appears inside that row.
5. Fill the Contains textbox (the inner one, not the dialog's top-level "Search filters" box) with the search string, e.g. a tx hash prefix like 0x4c1dcbad.
6. Click Apply 1 filter to close the dialog.
7. Click Update afterwards to actually re-render the report. Apply alone does NOT re-render; the previous filter state remains active until Update fires.
8. After re-render, the report shows either matching rows or Nothing to show here (no hits — equivalent to "no results").

Pitfalls

• The Filter dialog has a top-level Search filters textbox at the top (textbox "Search filters" [ref=...]). It filters the list of available filter types (Account, Date, Description, etc.), not the report data. Filling it and clicking Apply produces "No filters found" and has no effect on the report.
  • When grep'ing snapshot output for a textbox to fill, this top box matches textbox "Search filters" while the right inner one matches textbox "Contains". Always target "Contains" exactly, and expand the Description row first (otherwise no Contains box exists yet and grep will fall through to other refs).
• Re-opening the Filter dialog when a Description filter is already active shows the row collapsed with its current value embedded in the generic label (e.g. generic "Description0xafe067de"). It does NOT auto-expand. You have to click it to expose the inner Contains textbox.
• After Apply closes the dialog, the dialog's Apply 1 filter button count changes to reflect filter state — use that to verify the filter was registered.
• Looping through many filter values: after each Update, wait 6+ seconds before the next iteration. Re-snapshot after every step — refs change. Verify each iteration with a screenshot or by grepping the saved snapshot for Nothing to show here vs hash prefix matches.

Use cases

• Cross-checking whether a specific transaction (e.g. an on-chain tx identified by hash, or any other narration string) is already booked in Xero. When the source system's displayed timestamp can drift from the canonical event time (as with on-chain transactions and tools like Cryptio that reflect ingestion time rather than block time), date+amount matching is unreliable — match on a canonical identifier embedded in the journal narration instead.

Searching Transactions By Date Range

When you need to find transactions within a specific date range, use the custom Account Transactions report rather than browsing journals or bank pages one by one.

Workflow

1. Navigate to https://go.xero.com/app/dashboard as the stable entry point, then open Reporting from the top navigation. Do not construct org-scoped URLs like /app/<orgcode>/reporting by hand — the org code changes and typing the wrong one hits a "You don't have access to this organisation" page.
2. Open Account Transactions.
3. Configure Grouping/Summarising.
4. Open the menu.
5. Set Grouping/Summarising to None unless you explicitly need grouped totals.
6. Confirm the change.
7. Close the menu.
8. If you deliberately keep grouping enabled, consider Accounts to include = Only with transactions to remove empty-account sections.
9. Configure the Accounts picker deliberately.
10. Decide whether you want the broadest report or a narrow report.
11. If you want the broadest report, open the Accounts picker, click Select all, confirm the selected-account count, and close the picker.
12. If you want a narrow report, first take a snapshot.
13. Open the Accounts picker.
14. Take another snapshot with the picker open.
15. If needed, reset the hidden selection state first by clicking Select all and then Deselect all.
16. For each account you want to include, use the ref from the open-picker snapshot for that account row, scrollintoview that ref, then check the checkbox ref.
17. If the DOM changes enough that refs may have been reassigned, take another snapshot with the picker still open before continuing.
18. Confirm the final selected-account count.
19. Close the picker.
20. Open the Columns menu.
21. Add Account, Account Code, and Account Type if they are not already selected.
22. Confirm the change.
23. Close the menu.
24. Set the start and end date fields directly. After filling both date fields you must close the calendar picker before clicking Update — press Escape or click off the field. Do not snapshot or interact with any other control between filling start and filling end. If you do anything between the two fills (especially a snapshot, which can re-render the picker), Xero may paste your end-date string into the start-date field and leave the end date untouched (end field stays at e.g. ). Re-snapshot once after both fills and verify both fields display the expected value before clicking Update.

Accounts picker: click the [onclick] wrapper, not the combobox

The Accounts picker trigger renders as two stacked elements in agent-browser snapshot -i:

• an OUTER generic "N accounts selected" [ref=eXX] clickable [onclick] — this is the click target (it carries the onclick handler)
• an INNER combobox "N accounts selected" [expanded=false, ref=eYY] — inert; clicking it does nothing (stays expanded=false)

Click the outer generic, not the inner combobox. The [onclick] marker in the snapshot is the tell for which ref to click. (Same rule as elsewhere in this skill: click the ref that carries the handler for the visible label, not a nested inert element.)

• Toggle: clicking the wrapper opens the picker; clicking it again (or Escape) closes it. After selecting, close it, then click Update.
• Full list when open: the open picker exposes the entire account list as checkbox "1234 - Account Name" [checked=true|false, ref=...] rows (plus a Select all button). Select the documented way — scrollintoview @rowRef then check @checkboxRef. Do NOT try to JS-match checkboxes by label text via eval: an attempt to bulk-check that way silently failed / returned NOT FOUND while the real checkbox refs were sitting right there in the snapshot.
• Refs: checkbox refs stay stable while the picker stays open across snapshots, but the trigger's own wrapper ref changes after the report re-renders — re-snapshot to get a fresh wrapper ref each time you open it.

Notes

• Treat each report setting as a small closed loop: open, change, confirm, close, then move on.
• Do not leave Grouping/Summarising, Columns, or the account picker open while moving to another control.
• Grouping/Summarising = None is the preferred default because it removes extra grouping noise and makes individual ledger lines easier to scan.
• Setting Grouping/Summarising to None can trigger a Missing settings info button, but the report can still render rows after updating.
• The Accounts picker can be driven reliably from the full unfiltered list by combining scrollintoview with check.
• scrollintoview is the preferred way to bring a target account into view before checking it.
• Never put snapshot at the start of a single && command chain and then continue with refs chosen in advance. That creates a mismatch: the refs in the later commands were selected before that newest snapshot ran.
• The safe pattern is: run snapshot, inspect its output, then build a later command using refs from that exact snapshot. If opening the picker or checking a box changes the DOM, snapshot again and use the new refs.
• The search-box method is still valid, but it is slower and should be treated as a fallback. See Appendix: Filtered Account Search Fallback.
• For a single day search, set both date fields to the same date.
• Date fields accept typed values such as 2 Dec 2024.
• This report is useful for spotting transaction descriptions, journal numbers, related accounts, debit/credit values, and references on the chosen date.
• The default columns are typically not enough; strongly recommended to add Account, Account Code, and Account Type to make it easier to trace which ledger accounts were hit.
• Do not assume the default account selection is appropriate. Either expand to all accounts with Select all or deliberately narrow to specific accounts.

Important

• Do not hardcode @e... refs in documentation or scripts. They change after navigation and after many UI updates.
• Use agent-browser snapshot -i before each step that needs an element ref, then click or fill the ref that corresponds to the visible label on the page.
• Do not combine snapshot with later ref-based actions in the same command chain if those refs were selected before the snapshot ran.
• For account selection in the Accounts picker, prefer scrollintoview @rowRef followed by check @checkboxRef, both taken from the same open-picker snapshot.
• Verify the report heading and the date fields after updating, rather than assuming the change applied.

Example

To inspect transactions on 2 Dec 2024:

agent-browser snapshot -i
# click the "Reporting" button from the top nav

agent-browser wait 3000
agent-browser snapshot -i
# click the "Account Transactions" report link

agent-browser wait 3000
agent-browser snapshot -i
# click the "Grouping/Summarising" button

agent-browser wait 1000
agent-browser snapshot -i
# select the "None" option from the grouping chooser

agent-browser wait 500
agent-browser snapshot -i
# optionally open the accounts dropdown and restrict the report to specific accounts
# optionally open the "Columns" menu and enable "Account", "Account Code",
# and "Account Type"

agent-browser wait 3000
agent-browser snapshot -i
# fill the start date field with "2 Dec 2024"
# fill the end date field with "2 Dec 2024"
# click the "Update" button

agent-browser wait 3000
agent-browser snapshot -i

Always re-snapshot after opening the report, after changing grouping, after changing Accounts to include if you use it, and after updating the date range, because the refs change.

Appendix: Filtered Account Search Fallback

This is an alternative account-picking approach. It works, but it is slower than the full-list scrollintoview workflow above. Use it as a fallback if the full-list method becomes unreliable on a specific page state.

Workflow

1. Open the Accounts picker.
2. Reset the hidden selection state first by clicking Select all and then Deselect all.
3. Type one account code into the search box, for example 1110.
4. Take a fresh snapshot.
5. Check the single visible checkbox for that filtered result.
6. Repeat steps 3 to 5 for each additional account.
7. Confirm the final selected-account count.
8. Close the picker.

Notes

• The Accounts picker only changes which options are visible when filtered. It does not reset the underlying selected-account set.
• If you filter first and then toggle selection, you can leave many hidden accounts selected and get misleading report output.
• The one-account-at-a-time filtered method works reliably, but it is slower than selecting directly from the full list.

Viewport

Xero's dense pages benefit from fitting the browser before automation. Follow the agent-browser-local viewport guidance, which delegates to the standalone agent-browser-viewport helper.

Non-standard UI Elements

Xero uses non-standard HTML for many interactive elements.

Options menus

Xero payment and transaction pages use the generic dl/dt/dd pattern documented in agent-browser-local. Their generated ids vary, so locate the menu by its visible Options label.

Common onclick patterns seen on payment/transaction pages:

• showUnrecWarning or singleUnrecWarning — Unreconcile (varies by page type)
• DeleteTransaction — Remove & Redo
• PrintPopup — View Receipt (PDF)

On Manual Journal pages the dropdown is labelled "Journal Options" (not "Options"):

# Force open and inspect
agent-browser eval --stdin <<'EVALEOF'
const joDl = Array.from(document.querySelectorAll('dl')).find(el => el.innerText.trim().startsWith('Journal Options'));
const joDd = joDl.querySelector('dd');
joDd.style.display = 'block';
joDd.style.visibility = 'visible';
joDd.style.opacity = '1';
joDd.innerHTML
EVALEOF

# Click Edit on a posted manual journal
agent-browser eval "document.querySelector('dd a[href*=\"edit=true\"][href*=\"invoiceID\"]').click()"

Editing posted manual journals: Xero allows editing line descriptions (and other fields) on posted manual journals via Journal Options → Edit. The edit page works the same as the draft edit page — click the empty cell to the left of the description cell to activate the textbox, fill it, then click Post.

The journal UUID remains unchanged after editing. The sequential journal number (e.g. #11791) increments to a new number (e.g. #11793) as a display artefact, but the old number no longer exists — Xero edits in place. There are no duplicates or voided entries created.

CRITICAL: Never refer to a manual journal by its sequential #NNNNN number in notes, todos, commit messages, or any persisted artefact. That number is unstable — every edit-in-place renumbers it, so a doc that says "#11799" today points at nothing tomorrow.

The durable identifier is the full UUID (e.g. deadbeef-0000-4000-8000-000000000000). Every persisted reference to a manual journal must include either the full UUID or — preferably — the full click-through URL https://go.xero.com/Journal/View.aspx?invoiceID=<full-uuid>, because you cannot reconstruct the URL without the full UUID anyway.

The truncated UUID prefix (first segment, e.g. deadbeef) is purely a convenient shorthand for repeated mentions of the same journal within a discussion — to avoid repeating the long form once it has been introduced. It is not a substitute for the full UUID/URL: the durable record must always contain the full form somewhere nearby (typically the first time the journal is mentioned). The sequential #NNNNN is acceptable as transient context inside a single conversation, but never write it down anywhere durable.

This applies to CHAT with the user too, not only persisted artefacts. When you name a journal (or any transaction) in a message to the user, its FIRST mention must carry date/timestamp + a human-readable description of what it does (DR/CR + amount + purpose) + the click-through URL — never a bare #NNNNN or bare UUID on its own. The user cannot resolve opaque IDs and is left "flying blind" by them. This holds for Cryptio transactions and on-chain hashes as well (give the Cryptio both-params link / block-explorer URL + timestamp + what it is). Only after the full, described form has been given once may a short prefix be used for repeat mentions in the same message thread.

ExtJS autocomplete dropdowns

Xero account and tax-rate fields use the ExtJS combo pattern documented in agent-browser-local. On manual journals, activate the empty account cell, type the account code, select the exact .x-combo-list-item, and verify that the cell displays the chosen account.

Bank Reconciliation — Find & Match

General flow

1. Click "Find & Match" on the statement line
2. Re-snapshot to get fresh refs within the opened panel
3. If the invoice is in a foreign currency, uncheck "Show GBP items only" (see below)
4. The results list will show available invoices/bills — tick the correct one
5. Confirm totals match in section 3 before reconciling
6. Click Reconcile — only with explicit user permission

CRITICAL: Never reconcile without explicit user permission for each individual line.

CRITICAL: Always match against an invoice/bill in the results list. NEVER create a payment transaction — that double-counts the income.

"Show GBP items only" checkbox

The checkbox ref from snapshot may not toggle correctly. If so, use JS instead:

agent-browser eval "document.getElementById('showBankCurrencyToggle').click()"
agent-browser eval "document.getElementById('showBankCurrencyToggle').checked"  # verify

Partial payments (Split)

When the bank line covers only part of an invoice:

1. Tick the invoice in the results list — a "Split" link appears next to it
2. For foreign currency invoices: click the "Rate from DD Mon YYYY" button first to load the correct exchange rate. This shows a tooltip (from XE.com) with the rate, e.g. "1 GBP = 1.35415 USD". Take a screenshot to read it — it does not appear in snapshots. Note: section 3 may show a different (wrong) rate outside the tooltip — ignore that, the XE.com tooltip is always correct.
3. Calculate the part payment amount in the invoice's currency: GBP amount × XE.com rate (e.g. £898.05 × 1.35415 = $1,216.34)
4. Click "Split" — a dialog appears with Balance, Part payment, and Remaining amount
5. Enter the calculated amount, then click Split — the link changes to "Unsplit" confirming success
6. Verify section 3 shows "Totals match" before proceeding

Ticking/unticking invoices in the results list

Use agent-browser check @eN to tick an invoice. To untick, use agent-browser click @eN — do not use check to untick, as it may re-tick instead.

After ticking/unticking, verify the correct invoice appears in section 2 before proceeding.

Verifying input field values

agent-browser get text @eN does not work for input field values. Use a screenshot instead.