| name | slack-network-alerts |
| description | Format and deliver network alerts, health warnings, and critical notifications via Slack with rich formatting, reactions, and file attachments. Use when sending alerts to Slack, posting health check results, notifying the team about a device issue, or formatting network status updates for a channel. |
| license | Apache-2.0 |
| user-invocable | true |
| metadata | {"openclaw":{"requires":{"bins":"[Truncated]"}}} |
Slack Network Alerts
Slack OAuth Scopes Used
| Scope | Purpose |
|---|
chat:write | Post alert messages to channels |
chat:write.customize | Post with custom username/avatar per alert severity |
reactions:write | Add emoji reactions to acknowledge/track alerts |
files:write | Attach diagrams, reports, and log excerpts |
app_mentions:read | Respond when users @mention NetClaw |
channels:join | Join alert channels automatically |
Alert Severity Formatting
Use Slack Block Kit formatting to visually distinguish severity levels.
CRITICAL Alert Format
:rotating_light: *CRITICAL — Device Unreachable*
*Device:* R1 (10.1.1.1)
*Detected:* 2024-02-21 14:32 UTC
*Impact:* 47 downstream routes affected, 3 OSPF adjacencies lost
*Symptoms:*
• Ping 0% success (was 100%)
• OSPF neighbor state: DOWN
• BGP peer 10.1.1.2: IDLE
*Recommended Action:*
1. Check physical connectivity / power
2. Verify interface status on upstream device
3. Check for reload reason if device recovers
_Thread for investigation updates →_
HIGH Alert Format
:warning: *HIGH — Interface Flapping*
*Device:* SW1 | *Interface:* Gi1/0/24
*Flap Count:* 12 in last 30 minutes
*Connected To:* R2:Gi0/0/1 (discovered via CDP)
*Action Required:* Investigate physical layer — CRC errors detected (47 in 5 min)
WARNING Alert Format
:large_yellow_circle: *WARNING — Memory Pressure*
*Device:* R2 | *Memory:* 82% used (2.1G / 2.6G)
*Trend:* Increased from 71% over 24h
*Top Consumer:* BGP Router (843 MB)
_Monitor — no immediate action required_
INFORMATIONAL Alert Format
:information_source: *INFO — Configuration Change Detected*
*Device:* R1 | *User:* admin (10.0.0.50)
*Time:* 2024-02-21 09:15 UTC
*Change:* 3 lines modified in running-config
_Captured in GAIT session abc123_
Alert Workflows
Health Check Alert Flow
After running a health check (pyats-health-check skill), post results to the designated channel:
- Run the full health check procedure
- Determine overall severity (CRITICAL > HIGH > WARNING > HEALTHY)
- Format the alert using the appropriate severity template above
- Post to the network operations channel
- If CRITICAL or HIGH, add :rotating_light: or :warning: reaction to the message
- If CRITICAL, start a thread with detailed diagnostics
Threshold-Triggered Alerts
When any health check metric exceeds thresholds:
| Metric | WARNING | HIGH | CRITICAL |
|---|
| CPU 5min avg | > 50% | > 75% | > 90% |
| Memory used | > 70% | > 85% | > 95% |
| Interface errors | > 0 CRC | > 100/min | Resets incrementing |
| Packet loss | > 0% | > 5% | > 20% |
| NTP offset | > 100ms | > 500ms | > 1s or unsync |
| BGP peer | Flapping | 1 peer down | Multiple peers down |
| OSPF adjacency | Flapping | 1 adj lost | Area partition |
Multi-Device Fleet Alert Summary
After a fleet-wide health check, post a single summary:
:bar_chart: *Fleet Health Summary — 2024-02-21 14:00 UTC*
*Devices Checked:* 8 | :red_circle: 1 CRITICAL | :warning: 2 HIGH | :large_yellow_circle: 3 WARNING | :white_check_mark: 2 HEALTHY
┌──────────┬──────────┬──────┬────────┬──────────┬─────────────┐
│ Device │ CPU │ Mem │ Intf │ NTP │ Overall │
├──────────┼──────────┼──────┼────────┼──────────┼─────────────┤
│ R1 │ :white_check_mark: 12% │ :warning: 78%│ :white_check_mark: │ :white_check_mark: │ :warning: WARNING │
│ R2 │ :white_check_mark: 8% │ :white_check_mark: 45%│ :red_circle: Gi2 │ :white_check_mark: │ :red_circle: CRITICAL │
│ SW1 │ :warning: 67% │ :white_check_mark: 52%│ :white_check_mark: │ :red_circle: unsync │ :red_circle: HIGH │
└──────────┴──────────┴──────┴────────┴──────────┴─────────────┘
_Details in thread →_
Security Alert Flow
After a security audit (pyats-security skill), post findings:
:shield: *Security Audit — R1*
*Findings:* 2 CRITICAL | 2 HIGH | 3 MEDIUM | 1 LOW
:red_circle: *CRITICAL:*
• [C-001] SSHv1 enabled — MITM vulnerability
• [C-002] No VTY access-class — management plane exposed
:warning: *HIGH:*
• [H-001] No OSPF authentication on Gi1
• [H-002] SNMP community 'public' with no ACL
_Full report attached as file →_
Reaction-Based Acknowledgment
Use emoji reactions to track alert status:
| Reaction | Meaning |
|---|
| :eyes: | Alert acknowledged — someone is looking |
| :wrench: | Fix in progress |
| :white_check_mark: | Resolved |
| :no_entry: | False positive / suppressed |
| :hourglass: | Waiting on change window |
| :busts_in_silhouette: | Escalated to team |
When a user reacts with :eyes: on an alert, NetClaw can respond in the thread:
Acknowledged by @engineer1 at 14:35 UTC. Tracking in thread.
File Attachments
Attach supporting data as Slack files:
- Topology diagrams — Draw.io PNG/SVG after topology discovery
- Health reports — Full text report as .txt attachment
- Config diffs — Pre/post change diffs
- Log excerpts — Relevant log sections for investigation
- Markmap mind maps — Protocol hierarchy visualizations
Channel Strategy
| Channel | Purpose | Alert Types |
|---|
| #netclaw-alerts | Critical/High alerts only | Device down, security critical |
| #netclaw-reports | Scheduled reports | Health checks, audits, reconciliation |
| #netclaw-changes | Change notifications | Config changes, CR updates |
| #netclaw-general | General interaction | Ad-hoc queries, help |
Message Threading
- Always thread follow-up investigation steps under the original alert
- Post the initial alert as a top-level message
- Post diagnostics, show command outputs, and resolution steps as thread replies
- Post final resolution summary as both a thread reply and a top-level message
Integration with GAIT
Every alert should reference the GAIT session:
:information_source: _Tracked in GAIT session `abc123` — commit `def456`_
