| name | eks-genai |
| description | Use whenever someone is building, training, fine-tuning, or serving a generative AI / LLM workload on Amazon EKS — phrased as "GPU vs Trainium/Inferentia", "vLLM on EKS", "Ray Serve / KubeRay", "distributed training on EKS", "FSx for Lustre for ML", "Karpenter for GPU", "EFA / NCCL multi-node", "DCGM / Neuron Monitor", "LiteLLM / AI gateway", "RAG on EKS", "agentic AI on EKS", or "self-host Llama / Mistral / Qwen". Walks the opinionated 6-layer stack (compute → cluster/scheduler → frameworks → storage → observability → AI gateway), the GPU-vs-Neuron decision, the JARK + vLLM + LiteLLM canonical reference, KV-cache tiering, cost levers (Neuron, Spot, Capacity Blocks), and a non-negotiable security baseline. Trigger even if "GenAI" is never said — any GPU/Neuron, inference-serving, or distributed-training decision on EKS qualifies. Skip for SageMaker-only or Bedrock-only (no self-hosting) asks, and for generic cluster design/build with no AI/ML workload (use eks-design / eks-build). |
GenAI on Amazon EKS
End-to-end opinionated guidance for running generative AI / LLM workloads on Amazon EKS, structured as a 6-layer stack from compute hardware up through the AI gateway. This skill is opinionated: it recommends one AWS-canonical reference stack — the JARK stack (JupyterHub + Argo + Ray + Karpenter) extended with vLLM serving and a LiteLLM gateway — and surfaces the alternatives plus the customer-context flags that justify deviating.
Two sources are the canonical foundation and every recommendation must align with one or both: the EKS AI/ML Best Practices guide and the awslabs/ai-on-eks reference implementation. For "how do I run a single EKS cluster well" (compute, networking, upgrades) use eks-best-practices; for designing/building the cluster itself use eks-design / eks-build. This skill is the GenAI workload layer on top.
When to Use This Skill
Activate when the user wants to:
- Choose GenAI hardware — NVIDIA GPU (p5/g6/g6e) vs AWS Neuron (Trainium/Inferentia)
- Serve an LLM (vLLM, Ray Serve, Triton, KServe) or run distributed training/fine-tuning on EKS
- Design GPU/Neuron scheduling (Karpenter NodePools, device plugins, EFA, Capacity Blocks, Spot)
- Pick ML storage (FSx for Lustre, Mountpoint S3 CSI, EFS, S3 Vectors) or wire GPU/Neuron observability
- Stand up an AI gateway (LiteLLM/Envoy), RAG pipeline, or agentic platform on EKS
- Optimize GenAI cost (Neuron migration, Spot+checkpoint, KV-cache tiering, consolidation)
Don't use this skill for:
- SageMaker-only or Bedrock-only (no self-hosting) — defer to ML/Bedrock guidance; this skill covers Bedrock only as a gateway target alongside self-hosted models
- "Is EKS the right base?" not yet decided — run container-service selection first
- Generic cluster design/build with no AI/ML workload →
eks-design / eks-build
- Self-service golden paths / Internal Developer Platform for ML teams (Backstage templates, ML-pipelines-as-a-service, multi-tenant self-serve) →
eks-platform-engineering. This skill is the GenAI workload layer (how to serve/train the model); platform-engineering is the self-service delivery layer (how teams request it). Ray Serve can appear in both — use this skill for the serving architecture, that one for the golden-path wrapper.
- Generic Kubernetes concepts (Claude knows these)
The 6-Layer Stack
Layer 6 AI Gateway / App LiteLLM · Envoy AI Gateway · RAG · Bedrock AgentCore · Strands
Layer 5 Observability DCGM Exporter · Neuron Monitor · Prometheus/Grafana · AMP/AMG
Layer 4 Storage FSx for Lustre · Mountpoint S3 CSI · EFS · S3 Vectors
Layer 3 Frameworks Ray + KubeRay · vLLM · Triton/Dynamo · Kubeflow/KServe (JARK)
Layer 2 Cluster/Scheduler Karpenter · NVIDIA + Neuron device plugins · EFA · Capacity Blocks
Layer 1 Compute/Hardware NVIDIA GPU (p5/g6/g6e) · AWS Neuron (Trainium/Inferentia)
Walk the customer bottom-up (Layer 1 → 6) on first engagement; revisit top-down for optimization. Each layer below gives the decision rule; depth is in the references.
Layer 1 — Compute / Hardware (the single most-impactful decision)
AWS docs explicitly recommend Neuron when the workload permits it. Do not reflexively pick NVIDIA GPU — the most common SA mistake.
- Default to AWS Neuron (Trn2/Trn1 training, Inf2 inference) when the model is Transformer-family (Llama, Mistral, Qwen, Falcon) + framework is PyTorch/vLLM + cost-conscious + the team can absorb a 1-2 week compilation ramp. Up to ~50% cost-to-train (Trainium) / ~40% better price-performance (Inferentia2).
- Default to NVIDIA GPU (g6/g6e inference, p5/p5e training) for fastest time-to-first-success, CUDA-only dependencies, novel/non-Transformer architectures, or multi-modal models.
Right hardware = f(workload type × model family × latency × cost posture × team skill × timeline) — never one dimension alone. Full instance matrix + MIG/time-slicing: compute-hardware.md.
Layer 2 — Cluster / Scheduler
Karpenter is the only recommended autoscaler for GPU/Neuron (Cluster Autoscaler is not). Provision two NodePools (GPU + Neuron) from day one so future hardware migration is a cost experiment, not a re-architecture. Use EKS-optimized accelerated AMIs (Bottlerocket/AL2023) so drivers are pre-installed. Multi-node training needs EFA + NUMA pinning + static CPU manager (bandwidth halves without them) and NCCL/MPI in the image. Use the Neuron device plugin (not the DRA driver) with Karpenter/Auto Mode. Guarantee planned training capacity with Capacity Blocks for ML. Spot rule: training only with checkpoint/resume; inference On-Demand. Details: cluster-and-scheduling.md.
Layer 3 — Orchestration / Frameworks (most opinionated layer)
Default to the JARK stack + vLLM. vLLM is the default LLM inference engine (PagedAttention, OpenAI-compatible, GPU + Neuron via neuronx-distributed-inference); Ray + KubeRay is the default for distributed training and multi-replica serving. Reach for Triton (multi-framework/TensorRT), Dynamo (disaggregated prefill/decode), Kubeflow (full MLOps), or KServe (scale-to-zero) only when their specific flag applies. Decision table: inference-serving.md and distributed-training.md.
Layer 4 — Storage
Default → Mountpoint for S3 CSI for inference (lazy-load weights, per-pod cache) + FSx for Lustre for training (sub-ms, EFA-connected, S3 DRA for checkpoint offload). Use EFS only for shared multi-model weights, and S3 Vectors for cost-efficient RAG vector storage. Critical rule: FSx in the same AZ as the GPU/Neuron nodes — cross-AZ latency dwarfs FSx's native performance. Pre-warm FSx before launching Spot capacity. Details: storage.md.
Layer 5 — Observability
GenAI observability adds three first-class concerns over standard EKS: accelerator utilization/memory, per-token/per-request latency, and per-workload cost attribution. Stack: NVIDIA DCGM Exporter (GPU) + AWS Neuron Monitor (Trn/Inf) → Prometheus → Grafana, with vLLM metrics (TTFT, time-per-output-token, queue time). Use Amazon Managed Prometheus + Managed Grafana in production; keep observability pods off the GPU/Neuron nodes. Details: observability.md.
Layer 6 — AI Gateway / Application
For multi-model (self-hosted + Bedrock) serving, a gateway is non-negotiable. Default → LiteLLM (OpenAI-compatible proxy, per-tenant rate limiting + token cost accounting, Langfuse tracing); Envoy AI Gateway when you need L7 routing at ingress. For RAG, default the vector store to Bedrock Knowledge Bases (or S3 Vectors for cost) unless self-managed is required. For agents, default to Bedrock AgentCore (managed) or Strands Agents SDK for self-hosted. Details: ai-gateway.md, agentic-and-rag.md.
The Opinionated Reference Stack
The AWS-canonical default, shipped end-to-end in awslabs/ai-on-eks and the GenAI-on-EKS workshops:
| Layer | Default | Notes |
|---|
| Compute | Neuron (Inf2/Trn2) for Transformer LLMs; g6/g6e or p5 for GPU | Provision both NodePools |
| Scheduler | Karpenter + device plugin + (EFA for multi-node) | Bottlerocket/AL2023 accelerated AMI |
| Serving | vLLM (+ Ray Serve for scale) | OpenAI-compatible; Run:ai Streamer to stream weights from S3 |
| Training | Ray Train / PyTorch FSDP | FSx for Lustre + S3 DRA checkpointing |
| Storage | Mountpoint S3 CSI (inference) + FSx Lustre (training) | EFS for shared weights; S3 Vectors for RAG |
| Observability | DCGM / Neuron Monitor → Prometheus → Grafana + AMP/AMG | vLLM + Ray dashboards |
| Gateway | LiteLLM (+ Langfuse) | Routes self-hosted + Bedrock |
| Optimization | LMCache KV-cache tiering (L1 CPU / L2 Valkey) | Prefix-cache reuse across pods |
Pointing customers at the awslabs/ai-on-eks blueprints is the fastest credible path from idea to production. The current NVIDIA workshop validates this stack on EKS Auto Mode (K8s 1.34) with g6e (L40S), vLLM + KubeRay, Strands Agents, LMCache, and kube-prometheus-stack + AMP. Concrete versions and use-case → blueprint mapping: reference-implementations.md.
Security Baseline (non-negotiable)
Every GenAI-on-EKS recommendation MUST include: EKS Pod Identity / IRSA for pod credentials (never static keys); ECR image scanning; secrets via Secrets Manager/Parameter Store + Secrets Store CSI (never baked into images); model artifact provenance (image signing or Hugging Face checksum verification); private subnets for GPU/Neuron nodes with VPC endpoints for S3/Bedrock; audit logging to CloudTrail/CloudWatch; and Pod Security Admission restricted + CIS-hardened AMI for regulated/shared clusters. Details and compliance regimes: security-and-compliance.md.
Cost Optimization
Savings levers in priority order: (1) Capacity Blocks for planned multi-day training; (2) Neuron over GPU for supported architectures; (3) Spot + Karpenter + checkpointing for fault-tolerant training; (4) MIG / time-slicing for shared dev clusters; (5) Karpenter consolidation for off-peak inference; (6) KV-cache tiering + S3 lazy-load. Always give directional ranges with caveats — never point estimates. Details: kv-cache-and-cost.md.
Top Guardrails (the high-cost mistakes)
- Don't default to NVIDIA GPU — evaluate Neuron first for Transformer LLMs.
- Don't use Spot for training without checkpoint/resume — guaranteed cost-burn.
- Don't recommend Cluster Autoscaler for new GenAI clusters — Karpenter only.
- Don't put FSx for Lustre cross-AZ from the compute nodes.
- Don't skip NUMA pinning + static CPU manager on EFA multi-node training.
- Don't pull model weights from Hugging Face at every pod start — pre-cache to S3/FSx.
- Don't skip the AI gateway for multi-model deployments, or the security baseline ever.
- Don't give point cost estimates — directional ranges with caveats only.
How to Use the References
Progressive disclosure — the essentials are above; load a reference only when the task needs that depth:
| Reference | Load when the task is about… |
|---|
| compute-hardware.md | GPU vs Neuron, instance families, MIG/time-slicing |
| cluster-and-scheduling.md | Karpenter NodePools, device plugins, EFA/NUMA, Capacity Blocks, Spot, Auto Mode |
| inference-serving.md | vLLM, Ray Serve, Triton, Dynamo, KServe, model loading |
| distributed-training.md | Ray Train, PyTorch DDP/FSDP, checkpointing, EFA/NCCL, gang scheduling |
| storage.md | FSx Lustre, Mountpoint S3 CSI, EFS, S3 Vectors, model artifacts |
| observability.md | DCGM, Neuron Monitor, Prometheus/Grafana, AMP/AMG, vLLM metrics |
| ai-gateway.md | LiteLLM, Envoy AI Gateway, routing, rate limiting, Open WebUI |
| agentic-and-rag.md | Bedrock AgentCore, Strands, LangGraph, RAG, vector stores, Langfuse |
| kv-cache-and-cost.md | LMCache KV-cache tiering, prefix caching, cost levers |
| security-and-compliance.md | Pod Identity/IRSA, ECR scanning, secrets, provenance, compliance regimes |
| reference-implementations.md | ai-on-eks blueprints, workshops, concrete validated stack + versions |
| use-cases.md | Worked end-to-end scenarios (inference, training, Neuron migration, agentic, hybrid) with 30/60/90 build paths |
Sources
