5g-telecom-attack

name	5g-telecom-attack
description	5G core (AMF/SMF/UPF), RAN, signaling (PFCP/GTP/Diameter/SS7), IMSI catchers, O-RAN security, roaming abuse, SMS interception, and telecom infrastructure red team operations.
origin	github-trending-2026
version	0.2.0.2
compatibility	Claude Code, Claude Agent SDK
allowed-tools	["Bash","Read","Edit","Write","Glob","Grep"]
metadata	{"domain":"telecom","category":"telecom","tool_count":13,"guide_count":2,"mitre":"TA0001-Initial Access, T1557-Adversary-in-the-Middle, T1565-Exfiltration","last_reviewed":"2026-07-26","keywords":["5g","telecom","srsran","open5gs","pfcp","gtp","diameter","ss7","imsi-catcher","oran","roaming","sms-interception"]}

Skill: 5G Telecom Attack

Supplementary Files:

• payloads.md — Command catalogue for 5G core, RAN, and legacy signaling attack surfaces — 18 sections with real commands: Open5GS+UERANSIM Docker lab bring-up, srsRAN gNodeB with USRP/BladeRF, AMF NGAP/SCTP reconnaissance, SMF/UPF PFCP enumeration, PacketRusher fuzzing, GTP-U tunnel injection, GTP-C scapy fuzzing, Diameter (S6a/Sh/Rx) roaming testing, SS7 MAP legacy context, IMSI catcher detection workflow, SUCI/SUPI privacy analysis, NAS SMS interception, O-RAN O1/O2/E2 interface testing, SEPP/border gateway roaming abuse, network slice isolation tests, Wireshark 5G dissectors (NGAP/PFCP/GTP), blue-side detection engineering (Suricata/Splunk), quick reference cheat sheet.
• test-cases.md — Structured test cases (TC-5G-001..018): Open5GS+UERANSIM lab bring-up, AMF NGAP fingerprinting, PFCP enumeration of SMF, GTP-U tunnel injection, GTP-C fuzzing with scapy, Diameter S6a testing, SS7 MAP legacy+caveats, IMSI catcher detection workflow, SUCI/SUPI privacy analysis, O-RAN O1 interface scan, network slice isolation test, 5G dissection with tshark, PFCP Session Deletion DoS (Praetorian), PFCP Session Modification redirection, Diameter ULR unauthorized location retrieval, SUCI replay and null-scheme detection, O-RAN Near-RT RIC E2 test, SEPP N32 roaming filter bypass — plus a Verification Checklist and Defense/Mitigation Patterns section.
• guides/5g-telecom-attack-playbook.md — End-to-end telecom red team playbook: scope/legal (frequency licensing, jammer laws, GSMA disclosure) → 5G architecture refresher (AMF/SMF/UPF/AUSF/UDM/PCF/NRF/NSSF, N1-N11) → lab build (Open5GS+UERANSIM Docker, srsRAN gNB, SDR hardware) → signaling methodology (NGAP/SCTP recon → PFCP probing → GTP injection → fuzzing) → real-world incidents (Karsten Nohl SS7, Praetorian 5G DoS, Positive Technologies 2023, Alonso 5G privacy) → references (3GPP TS 33.501/33.401/29.244, NIST 5G cybersecurity guide, ENISA 5G threat landscape).
• guides/5g-telecom-attack-deep-dive.md — Step-by-step lab reproduction deep dive: Open5GS+UERANSIM full-stack bring-up, PFCP Praetorian (2019) DoS class reproduction with working scapy PoC, Diameter S6a ULR abuse lab (OsmoHLR + seagull), IMSI catcher detection with srsRAN + AIMSICD, SUCI/SUPI ECIES decryption PoC (Alonso et al. 2021 class), MITRE ATT&CK and 3GPP TS 33.501 control crosswalk, per-finding and engagement-summary reporting templates, full 3GPP/GSMA/NIST/ENISA reference bibliography.

Summary

5G telecom attack skill domain covering the operator-side cellular stack: the 5G Core (5GC) components (AMF, SMF, UPF, AUSF, UDM, PCF, NRF, NSSF), the Radio Access Network (gNodeB, O-RAN), and the signaling protocols that carry subscriber identity, session state, and roaming traffic (NGAP, PFCP, GTP-U, GTP-C, Diameter, MAP/SS7, NAS). This is the cellular network as target — the infrastructure that authenticates 5 billion subscribers, routes their data, and hands them off between cell sites and roaming partners. Where bluetooth-rfid-nfc covers the last 10 meters of local radio, this skill covers the 10–10,000 km of operator infrastructure between the UE and the internet.

Tools: srsRAN_Project (open-source 5G CU/DU), Open5GS (open-source 5G Core), UERANSIM (UE/gNB simulator), PacketRusher (5GC load/fuzz tester), Wireshark with 5G dissectors (NGAP/PFCP/GTP), srsENB/srsUE (4G/5G SDR stack), Gr-SDR/USRP (SDR hardware drivers), Amarisoft (commercial gNB stack), PFCP toolkit, ss7MAPer (SS7 MAP tester), sctpscan (SCTP scanner), diagpttcc (diag parser), tshark.

Domain: telecom

MITRE ATT&CK: TA0001-Initial Access, T1557-Adversary-in-the-Middle, T1565-Exfiltration, T1499-Endpoint Denial of Service (5GC signaling DoS)

Description

Telecom infrastructure is one of the oldest and most regulated attack surfaces in information security. SS7 (Signaling System 7) was designed in 1975 when the assumption was "every switch on this network is owned by a national postal, telephone, and telegraph administration and is therefore trustworthy". That assumption died in 2008 when Tobias Engel demonstrated location tracking and call/SMS interception via SS7 MAP at the Chaos Communication Congress, and it was buried for good in 2014–2016 when Karsten Nohl showed at BlackHat and 31C3 that he could intercept calls and SMS of members of multiple national governments by abusing SS7 roaming messages purchased from a small operator with global reach. Diameter — the 4G/LTE successor that was supposed to fix SS7 — was shown by Positive Technologies (2017+) to have the same class of issues, and 5G's SEPP (Security Edge Protection Proxy) for roaming interconnect is the third attempt at the same problem.

This skill covers the eight things that distinguish 5G/telecom attacks from generic network pentests:

1. The cellular network is three networks — The 5G system is the union of (a) the Radio Access Network (gNodeB, O-RAN with O1/O2/E2/open fronthaul interfaces), (b) the 5G Core (AMF/SMF/UPF/AUSF/UDM/PCF/NRF/NSSF service-based architecture on HTTP/2), and (c) the inter-operator interconnect (SEPP for N32 roaming, Diameter for 4G roaming, SS7/MAP for 2G/3G roaming). Each has its own protocol stack, threat model, and legal regime. A telecom red team rarely engages all three simultaneously; most engagements target one.

2. Subscriber identity is the crown jewel — and 5G tried to fix it but didn't — In 4G/LTE, the IMSI (International Mobile Subscriber Identity) is sent in cleartext on the initial attach, enabling the IMSI catcher (Stingray, Hailstorm) — a fake base station that triggers the UE to reveal its IMSI, which can then be correlated to a subscriber. 5G introduced SUPI (Subscriber Permanent Identifier, the 5G IMSI) and SUCI (Subscriber Concealed Identifier) — SUPI encrypted with the operator's public key before being sent on the air. The Alonso et al. research (2021+) showed the encryption scheme is vulnerable if the operator uses an ECIES-based scheme with a weak home network public key or a predictable scheme ID. 5G reduces but does not eliminate IMSI catcher feasibility.

3. PFCP is the new GTP-C — and it has the same DoS class — The Packet Forwarding Control Protocol (3GPP TS 29.244) runs between the SMF (Session Management Function) and the UPF (User Plane Function) to install forwarding rules. Praetorian (2019) and subsequent work showed that PFCP messages with attacker-chosen TEID (Tunnel Endpoint Identifier) and far-end IP can be injected into a UPF that does not authenticate the SMF source — causing session hijack or mass session teardown (DoS for every subscriber whose session the UPF drops). 5G PFCP inherits the design of 4G Sx; the attack class is unchanged.

4. GTP-U tunnels are the new VPNs — and they have the same injection class — GTP-U (GPRS Tunneling Protocol User Plane, 3GPP TS 29.281) encapsulates subscriber IP traffic between the gNB and the UPF. Unauthenticated GTP-U on the N3 interface is the classic "untrusted source spoofing" bug: an attacker who can reach the UPF's GTP-U port (UDP 2152) with a captured TEID can inject traffic into the subscriber's session (downlink), or capture and exfiltrate subscriber traffic by advertising a TEID pointing at themselves (uplink redirection). This is the modern successor to "the SS7 location query told me where the subscriber is; now I will intercept their traffic via GTP".

5. Diameter is SS7 with extra steps — The 4G/LTE Home Subscriber Server (HSS) speaks Diameter on the S6a interface (MME↔HSS). The same class of issues applies: an attacker with access to a roaming Diameter peer can issue Update-Location-Request (ULR) for any IMSI in any home network, retrieve the authentication vector (RAND/SRES/Kc or RAND/RES*/AUTN in 5G), and impersonate the subscriber or track them via Provide-Subscriber-Info (PSI). Positive Technologies' 2017–2023 series documented this for multiple operators. 5G's SBA still uses Diameter for the UDSF/UDR backend in some profiles.

This skill is the cellular-network counterpart to ad-ldap-attack (enterprise identity infrastructure) and cloud-identity-attack (cloud identity infrastructure): where those cover authentication and authorization in the IT and cloud tiers, this covers authentication and authorization in the telecom tier — the third identity infrastructure that every smartphone on earth depends on.

Use Cases

• 5G Core (SBA) pentest — Black-box or grey-box engagement against a 5GC deployment (operator production, MVNO test core, or private 5G enterprise deployment). Enumerate NRF, walk the SBI, identify unauthenticated NF endpoints, find logic flaws in subscription/session/policy flows.
• PFCP enumeration and fuzzing — Identify the SMF↔UPF interface on the N4 reference point, fingerprint the PFCP implementation (Open5GS, free5GC, vendor), fuzz Heartbeat Request / Session Establishment Request / Session Modification Request for crashes or DoS.
• SS7 / Diameter legacy testing — Engagements scoped against the 2G/3G (SS7 MAP) or 4G (Diameter S6a) roaming interconnect of a mobile operator. Always requires explicit roaming-partner authorization and legal review; frequently out-of-scope for private 5G deployments that have no roaming footprint.
• IMSI catcher detection — Defensive engagement: deploy a monitoring SDR (BladeRF, USRP B210, HackRF) and detect rogue base stations triggering cleartext IMSI or ECIES-encrypted SUCI with anomalous patterns. Used by journalists, defense contractors, and CSIRTs.
• Roaming abuse assessment — Operator-side assessment of the SEPP configuration, N32 filtering rules, roaming agreement enforcement. Verify that a visited-network peer cannot issue unauthorized messages (ULR, IDR, PSI) against home-network subscribers.
• O-RAN component testing — Vulnerability assessment of the O1/O2/E2/A1 interfaces on an O-RAN compliant gNodeB or RIC. Identify weak TLS, default credentials, command injection in the O1 NETCONF/YANG layer, or path traversal in the O2 Helm chart deployment.
• SMS interception and NAS-layer analysis — Engagement that captures and analyzes NAS (Non-Access Stratum) signaling between UE and AMF to identify SMS-in-NAS, emergency-call handling, or subscriber tracking via the 5G-GUTI reallocation pattern.

Core Tools

Tool	Purpose	License / Notes
srsRAN_Project	Open-source 5G CU/DU (gNodeB) — software radio stack. Runs with USRP/BladeRF hardware. Used in lab bring-up and attack reproduction.	AGPL-3.0. github.com/srsran/srsRAN_Project
Open5GS	Open-source 5G Core (AMF/SMF/UPF/AUSF/UDM/PCF/NRF/NSSF) in C. Default lab core for red team — minimal config, exposes SBI on HTTP/2.	AGPL-3.0. open5gs.org
UERANSIM	Open-source UE and gNB simulator in C++. Pure-software — no SDR required. Pairs with Open5GS for the canonical 5G lab.	GPL-3.0. github.com/aligungr/UERANSIM
PacketRusher	5G Core load tester and protocol fuzzer in Go. Supports NGAP, PFCP, GTP, SBI fuzzing. Default tool for stress/fuzz tests against Open5GS/free5GC.	Apache-2.0. github.com/HewlettPackard/PacketRusher
Wireshark (5G dissectors)	NGAP, PFCP, GTP-U, GTP-C, NAS-5GS, Diameter, S1AP, RANAP dissection. The lingua franca for telecom packet analysis.	GPL-2.0. wireshark.org
srsENB / srsUE	srsRAN's 4G LTE eNodeB and UE stack. Used for 4G/LTE-specific engagements (S1AP, GTP-C v2) and to validate 4G IMSI catcher PoCs.	AGPL-3.0. Part of srsRAN 4G.
Gr-SDR / USRP (UHD)	GNU Radio SDR blocks + Ettus UHD driver. Lower-level than srsRAN; used for custom PHY work, jammer characterization, and capture of cellular downlink for IMSI catcher detection.	GPL-3.0 / GPL-3.0.
Amarisoft	Commercial 5G/LTE base station stack (L1/L2/L3). Premium lab reference; many operators use it as a known-good gNB. Proprietary.	Commercial license. amarisoft.com
PFCP toolkit / pfcp-fuzzer	Custom and open-source PFCP packet crafters. Implement 3GPP TS 29.244 PFCP messages — Heartbeat, PFCP Session Establishment Request, PFCP Session Deletion Request — for fuzz and injection.	Various.
ss7MAPer	SS7 MAP (Mobile Application Part) testing tool. Legacy; mostly used for operator-side SS7 firewall validation.	Research use only. github.com/ernw/ss7MAPer
sctpscan	SCTP (Stream Control Transmission Protocol) port scanner. SCTP is the transport for NGAP (N2) and S1AP (S1-MME). Used to identify AMF and eNB SCTP endpoints.

Methodology

The engagement methodology is organized in five phases, each scoped against one of the three cellular network tiers (RAN, 5GC, Interconnect).

Phase 1: Reconnaissance (Passive)

• Spectrum survey — Sweep the licensed and unlicensed cellular bands (n78 3.3–3.8 GHz, n41 2.5 GHz, n28 700 MHz, B71 600 MHz, and LTE bands 1/2/3/4/5/7/12/13/14/66/71 for 4G coverage). Use a HackRF/BladeRF with osmocom_fft or gnuradio-companion to identify active base stations (SSB burst pattern for 5G, PSS/SSS for LTE). For engagements inside the operator's RAN team this is unnecessary; for engagements against a target operator's downlink (e.g., detecting rogue base stations) this is the first step.
• SCTP/HTTP-2 fingerprinting — From a vantage point on the operator's internal network (engagement-scoped), scan the AMF SCTP port (38412) and the SBI HTTP/2 port (443 / 80) for the 5GC service inventory. sctpscan, nmap -sSU -p 38412,2152,2123, and nmap --script http2-fingerprint against the NRF.
• NRF enumeration — Authenticate as a low-priv NF (or, in many lab and misconfigured deployments, unauthenticated) and call GET /nnrf-nfm/v1/nf-instances. This returns the full NF inventory — AMF IP, SMF IP, UPF IP, AUSF, UDM, PCF, NSSF, and every service each exposes. This is the 5GC equivalent of Get-ADUser -Filter * from ad-ldap-attack.

Phase 2: Signaling Analysis (Passive → Active)

• NGAP capture — tshark -i <iface> -f 'sctp port 38412' -Y ngap on the N2 interface between gNB and AMF. Identify NGAP messages: Initial UE Message, Downlink/ Uplink NAS Transport, Initial Context Setup, PDU Session Resource Setup. Verify ciphering and integrity protection are enforced on NAS (NAS COUNT incrementing, MAC correct).
• PFCP enumeration — Identify the N4 interface between SMF and UPF (UDP 8805). tshark -i <iface> -f 'udp port 8805' -Y pfcp. Map SEID (Session Endpoint Identifier) space — this is the per-session handle the SMF uses to address the UPF. Identify whether the UPF authenticates the SMF (most don't — the message source IP is trusted).
• GTP capture — Identify the N3 interface between gNB and UPF (UDP 2152 for GTP-U, UDP 2123 for GTP-C in 4G). tshark -i <iface> -f 'udp port 2152 or udp port 2123' -Y 'gtp || gtp_u'. Capture TEIDs in use and the mapping between TEID↔subscriber PDU session.

Phase 3: Attack Vector Validation

• PFCP injection PoC — Construct a PFCP Session Deletion Request with a captured SEID, source-spoofed from a different IP (or from a peer SMF in a multi-SMF deployment). Send to the UPF on UDP 8805. A vulnerable UPF will tear down the subscriber's session; the subscriber's data session drops and the operator's monitoring sees a PFCP session release event with no upstream cause. Document as the classic Praetorian class.
• GTP-U injection PoC — Capture a downlink GTP-U packet (gNB → UPF) and a TEID in use. Construct a raw UDP packet to the UPF's GTP-U port (2152) with the captured TEID and a payload of a crafted IP packet (e.g., TCP SYN to a known host the subscriber will RST). If the UPF forwards it, the subscriber sees an unsolicited packet from a host they never contacted — confirming GTP-U injection.
• Diameter ULR PoC (operator-side only, explicit roaming authorization) — Construct an Update-Location-Request for a test IMSI in the home network, signed with the roaming peer's credentials. Send on the S6a interface (SCTP 3868) to the HSS. A vulnerable HSS returns the authentication vector (RAND/RES*/AUTN) without confirming the IMSI belongs to the visited network.
• SUCI decryption PoC (engagement against a test operator using a known-weak home network public key) — Capture a SUCI from the air, apply the ECIES decryption with the operator's home network private key (engagement-scoped), recover the SUPI. Document as the Alonso class of attack.

Phase 4: Exploitation

• Session teardown DoS — Iterate PFCP injection across the captured SEID space. Mass session teardown. Document the rate (sessions/sec) and the recovery behavior (does the SMF re-establish? does the UE re-attach?).
• Subscriber traffic redirection — Inject PFCP Session Modification Request changing the UPF's far-end F-TEID for a target session to point at an attacker-controlled endpoint. Capture subscriber uplink traffic. Mirror to a forensic capture. Document scope and exfiltrate engagement-allowed samples only.
• SMS-in-NAS interception — If the engagement scope permits and the AMF/SMF use NAS SMS (5G carries SMS over NAS by default), capture the NAS messages and decode the RP-DL / RP-UL SMS. The SMS payload is at the NAS layer after NAS security activation, so this requires either the operator's NAS security keys (engagement-scoped) or a vulnerable AMF that delivers SMS without activating NAS security (rare, but seen in misconfigured cores).
• Roaming message abuse — From a visited-network vantage, issue unauthorized Diameter or SEPP messages (IDR, PSI, ULR) against home subscribers. Track the home network's response — auth vector returned, subscriber info returned, etc.

Phase 5: Reporting

• Operator-grade report — Include the SEID/TEID/IMSI/SUPI evidence with redaction; spectrum plots; SCTP/HTTP-2 packet captures with timestamps; impact analysis in terms of affected subscriber counts; remediation mapped to 3GPP TS 33.501 controls (e.g., "N4 interface source IP filtering per TS 33.501 §6.6.2").
• GSMA/3GPP disclosure — Most operator-side findings are coordinated via GSMA FS-IS (Fraud and Security Intelligence Group) and 3GPP SA3 Liaison. Reference the GSMA FS.32 SS7 / Diameter / SEPP recommendations and the operator's roaming agreement security clauses.
• Regulator notification — In many jurisdictions (EU NIS2, US FCC) a confirmed operator-side vulnerability with subscriber impact triggers regulatory notification. Confirm with the operator's legal team before filing.

Practical Steps

Worked Example 1: Lab Bring-Up (Open5GS + UERANSIM)

A canonical 5G lab for red team reproduction is Open5GS (5GC) + UERANSIM (UE + gNB). Bring-up in Docker Compose:

# Clone the canonical lab
git clone https://github.com/open5gs/open5gs /opt/open5gs
cd /opt/open5gs/docker

# Optionally, use the community-maintained compose
git clone https://github.com/michaelb732/open5gs-docker-compose /opt/open5gs-compose
cd /opt/open5gs-compose
docker compose up -d

# Verify the 5GC is up
docker compose ps
curl -sk https://localhost:8080/  # web UI
# AMF SCTP on 38412, UPF GTP-U on 2152, SMF PFCP on 8805

# Bring up a UE + gNB via UERANSIM
git clone https://github.com/aligungr/UERANSIM /opt/UERANSIM
cd /opt/UERANSIM
make -j$(nproc)
# Configure open5gs-gnb.yaml and open5gs-ue.yaml to point at the lab AMF
./nr-gnb -c config/open5gs-gnb.yaml
./nr-ue -c config/open5gs-ue.yaml
# Confirm the UE gets an IP from the SMF/UPF — ping 1.1.1.1 from UE iface

Worked Example 2: PFCP Fuzzing Workflow

Once the lab is up, fuzz the SMF↔UPF PFCP interface. PacketRusher is the canonical 5GC load/fuzz tester:

# Install PacketRusher
git clone https://github.com/HewlettPackard/PacketRusher /opt/PacketRusher
cd /opt/PacketRusher
go build -o packetrusher ./cmd/packetrusher
# Edit config.yml: set gnodeb.amf.ip to lab AMF

# Run a normal registration load to baseline
./packetrusher -c config.yml

# In a second shell, capture N4 PFCP
tshark -i any -f 'udp port 8805' -Y pfcp -w /tmp/pfcp-baseline.pcap

# Identify SEID space
tshark -r /tmp/pfcp-baseline.pcap -Y pfcp -T fields \
  -e pfcp.seid -e ip.src -e ip.dst | sort -u

# Fuzz: craft a PFCP Session Deletion Request with a known SEID
python3 - <<'EOF'
# scapy with pfcp contribution; use scapy.contrib.pfcp
from scapy.all import *
from scapy.contrib.pfcp import PFCP, PFCPHeader, IE_F_SEID, IE_Node_ID
# Build a Heartbeat Request first to fingerprint
hb = IP(dst='10.0.0.4')/UDP(sport=8805, dport=8805)/PFCP(version=1, msg_type=1, seq=1)
send(hb)
EOF

Worked Example 3: NGAP / NAS Analysis

Capture the N2 interface between gNB and AMF to verify NAS security and identify the SUPI→5G-GUTI mapping:

# Capture N2 NGAP
tshark -i any -f 'sctp port 38412' -Y 'ngap || nas-5gs' -w /tmp/n2.pcap

# Extract 5G-GUTI reallocations
tshark -r /tmp/n2.pcap -Y 'nas_5gs.message_type == 0x5b' \
  -T fields -e frame.time -e nas_5gs.guti.plmn.mcc \
  -e nas_5gs.guti.amf_pointer -e nas_5gs.guti_5g_tmsi

# Confirm NAS security mode is complete (ciphered from this point forward)
tshark -r /tmp/n2.pcap -Y 'nas_5gs.security_header_type' -V | head -200

Worked Example 4: IMSI Catcher Detection Workflow

Defensive engagement: deploy an SDR to detect rogue base stations in the operator's downlink band. This is the only worked example that does not require operator authorization — passive reception is legal in most jurisdictions, while transmission requires licensing.

# Use srsRAN or gr-SDR to capture the 5G SSB bursts in n78 (3.3-3.8 GHz)
# With a USRP B210 or BladeRF 2.0 micro:
osmocom_fft -f 3.5e9 -s 20e6  # visual survey

# Capture SIB1 (carries the operator PLMN, TAC, cell ID)
# srsRAN has a SIB1 decoder; gr-dvbs2 / gr-lte also have cell scanners
srsran_scanner_radio --band 78 --freq_start 3.3e9 --freq_end 3.8e9

# Log SUCI patterns — a high rate of ECIES-encrypted SUCI in a short
# time window from multiple UEs (all hitting the same fake cell) is
# the classic IMSI catcher signature in 5G.
# Open-source IMSI catcher detector: AIMSICD (Android) or srsRAN scan

Defense Perspective

Operators and large enterprises deploying private 5G detect and respond to this class of attack via:

• SEPP monitoring — The Security Edge Protection Proxy is the canonical control point for N32 roaming interconnect. Operators deploy SEPP with JOSE message-level integrity, IP allowlisting of roaming peers, and message-type filtering (e.g., ULR/IDR/PSI are limited to subscribers who actually roam on that visited network). Detection: SEPP reject counters, anomalous peer source IPs, unexpected message types.
• EMSPEC / SIGNTRACE — Commercial SS7/Diameter/SEPP signaling firewalls (Mavenir, Enea, NetNumber, Tata Communications). Apply rule sets derived from GSMA FS.32 / FS.33. Detect unauthorized ULR/PSI/IDR by correlating the target IMSI/SUPI against the operator's actual roaming footprint.
• PFCP source authentication — 3GPP TS 33.501 recommends (but does not mandate) source authentication on the N4 interface. Operators that deploy DTLS on N4 (per RFC 9260 / TS 33.501 §6.6) detect injection by the absence of a DTLS session. Operators without DTLS rely on the SMF and UPF being on a trusted L2 segment.
• GTP-U filtering — UPF ACLs: GTP-U traffic from the gNB only, TEID allowlist per session, drop from unexpected source IPs. Modern UPFs (Open5GS 2.7+, free5GC v3.4+) implement per-session TEID validation.
• NRF audit — Every NF-to-NF SBI call is logged by the NRF and the SCP (Service Communication Proxy). Detection: NF making unusual calls (e.g., a SMF querying UDM for subscribers not in its service area).
• 5G-GUTI rotation monitoring — Anomalous 5G-GUTI reallocation rates (too frequent → paging/IMSI catcher indicator; too infrequent → tracking risk) are detected by the AMF and surfaced to the operator's security monitoring.
• Rogue base station detection — In operator RAN: drive-test campaigns with measurement UEs that log the SSB / SIB1 fingerprint of every cell they hear. Any cell ID not in the operator's planned inventory is a candidate rogue base station. Commercial tools: Siradel, Rohde & Schwarz ROMES, Asseco AIMSICD (open-source).
• Spectrum monitoring — Continuous SDR capture of the operator's licensed band with anomaly detection on the SSB burst pattern. Detects both rogue base stations and jammers.

Differentiation

This skill is the only telecom-focused skill in the workspace. The closest adjacent skills are:

• bluetooth-rfid-nfc — Covers local-radio (BT/BLE, RFID/NFC) attack surfaces. 5g-telecom-attack covers cellular-radio infrastructure — the operator-side RAN/5GC/interconnect. Different radio, different regulatory regime, different engagement model (operator-scale vs. endpoint-scale).
• wifi-pentest — Covers 802.11 Wi-Fi attack surfaces (WPA2/3, evil twin, PMF). 5g-telecom-attack covers licensed-spectrum cellular (3GPP) — different protocol stack (NGAP/PFCP/GTP vs. 802.11 management frames), different licensing regime (operator-licensed vs. unlicensed ISM bands).
• dns-attacks — DNS is a control-plane protocol used inside telecom cores (DNS resolution for SBA/NRF service discovery). 5g-telecom-attack covers the 3GPP signaling plane (NGAP/PFCP/GTP/Diameter), not DNS.
• ad-ldap-attack — Enterprise identity infrastructure. 5g-telecom-attack covers telecom identity infrastructure — the SIM/AUSF/UDM/HSS tier that authenticates the world's 5 billion cellular subscribers. Same conceptual layer (identity), different technology stack.
• cloud-identity-attack — Cloud IdP infrastructure (Entra ID, Okta). 5g-telecom-attack covers the telecom identity tier that predates and parallels cloud IdPs.
• sdr-rf-attack — SDR/RF physical-layer attacks (jamming, replay, RF analysis). 5g-telecom-attack covers the protocol and infrastructure layer above the SDR PHY — what the bits mean after the SDR has captured them.

See Also

• bluetooth-rfid-nfc/SKILL.md — local-radio attack surface
• wifi-pentest/SKILL.md — Wi-Fi attack surface
• sdr-rf-attack/SKILL.md — SDR physical-layer attacks
• ad-ldap-attack/SKILL.md — enterprise identity infrastructure
• cloud-identity-attack/SKILL.md — cloud identity infrastructure
• network-tunneling-proxy/SKILL.md — GTP-U and other tunnel protocols overlap
• payloads.md — 18 sections of working telecom attack commands
• test-cases.md — 18 structured test cases (TC-5G-001..018)
• guides/5g-telecom-attack-playbook.md — end-to-end red team playbook with lab setup, signaling methodology, real-world incidents, and 3GPP/NIST/ENISA references
• guides/5g-telecom-attack-deep-dive.md — step-by-step lab reproduction: PFCP DoS, Diameter abuse, IMSI catcher detection, SUCI decryption

5G Core (5GC) Component Reference

The 5G Core is a service-based architecture (SBA) of Network Functions (NFs) exposing HTTP/2 + JSON APIs on the Service-Based Interface (SBI). Each NF has a specific role and an attack surface that engagement scoping must address individually.

NF	Role	Reference Point	Attack Surface
AMF	Access & Mobility Management; terminates NGAP and NAS	N1 (NAS), N2 (NGAP)	SCTP 38412 — NGAP DoS, NAS replay, 5G-GUTI tracking
SMF	Session Management; controls UPF via PFCP	N4 (PFCP)	UDP 8805 — PFCP injection, session teardown, F-TEID redirect
UPF	User Plane; GTP-U tunnels to gNB	N3 (GTP-U downlink), N9 (inter-UPF)	UDP 2152 — GTP-U injection, TEID enumeration, source spoofing
AUSF	Authentication (5G-AKA / EAP-AKA')	N12 (SBI)	HTTP/2 — auth vector replay, algorithm downgrade
UDM	Unified Data Management; subscriber profile + auth vectors	N8, N10	HTTP/2 — subscription enumeration, auth vector leak
UDR	Unified Data Repository; actual subscriber DB	N35, N36	HTTP/2 — DB enumeration, unauthorized reads
PCF	Policy Control; QoS, charging	N7, N15	HTTP/2 — policy tampering, QoS manipulation
NRF	Network Repository; service discovery	SBI (all NFs)	HTTP/2 7777 — full NF inventory leak (analogous to Get-ADUser -Filter *)
NSSF	Network Slice Selection	N22	HTTP/2 — slice mis-routing, cross-slice access
SEPP	Security Edge Protection Proxy; N32 roaming boundary	N32 (inter-operator)	HTTP/2 8443 — pass-through misconfiguration, JOSE tampering

Radio Access Network (RAN) Architecture

The 5G RAN consists of gNodeBs (gNBs) that may be monolithic (UERANSIM, srsRAN_Project single-binary) or disaggregated per the O-RAN Alliance architecture:

• O-RU (Radio Unit) — RF processing, low-PHY
• O-DU (Distributed Unit) — high-PHY, MAC, RLC
• O-CU-CP (Centralized Unit — Control Plane) — RRC
• O-CU-UP (Centralized Unit — User Plane) — PDCP, SDAP
• Near-RT RIC (Near Real-Time RAN Intelligent Controller) — E2 interface, xApps
• Non-RT RIC (Non Real-Time RIC) — A1 interface, rApps

Reference points within the RAN:

Reference Point	Between	Protocol	Port
N2	gNB ↔ AMF	NGAP over SCTP	38412
N3	gNB ↔ UPF	GTP-U	2152
E2	Near-RT RIC ↔ O-CU/O-DU	E2AP over SCTP	38472/38473
A1	Non-RT RIC ↔ Near-RT RIC	HTTP/2 + JSON	443
O1	SMO ↔ O-RU/O-DU/O-CU	NETCONF/RESTCONF	830/443
O2	SMO ↔ O-Cloud	Kubernetes API	6443

Inter-Operator Interconnect (Roaming)

The third tier of the 5G system is the inter-operator interconnect. Three protocol generations coexist:

• SEPP / N32 (5G) — Security Edge Protection Proxy. HTTP/2 with JOSE (JWS/JWE) message-level integrity and confidentiality. Deployed at the boundary between visited and home 5G cores.
• Diameter (4G/LTE) — S6a (MME↔HSS), Sh (HSS↔AS), Rx (PCRF↔AS). SCTP 3868. The Positive Technologies (2017-2023) research demonstrated the same abuse class as SS7.
• SS7/MAP (2G/3G) — Mobile Application Part over TCAP over SCCP. The Karsten Nohl (2014-2016) research demonstrated location tracking and call/SMS interception via unauthorized PSI/SAI.

Each generation attempted to fix the prior's authentication weaknesses. SEPP is the strongest (mandatory JOSE), but field deployments often run it in pass-through, negating the protection.

Subscriber Identity Model

5G subscriber identity has four layers, each with a distinct attack surface:

• SUPI (Subscriber Permanent Identifier) — the 5G IMSI. MCC-MNC-MSIN. Permanent, never sent in cleartext on the air in a properly-deployed 5G network.
• SUCI (Subscriber Concealed Identifier) — SUPI encrypted with the operator's home network public key using ECIES (Profile A: Curve25519; Profile B: secp256r1). Sent on the air during initial registration. Vulnerable if operator uses null scheme (protection_scheme=0) or weak/compromised public key.
• 5G-GUTI (5G Globally Unique Temporary Identifier) — temporary ID assigned by AMF after first registration. Replaces SUCI for subsequent messages. Tracking via 5G-GUTI reallocation patterns is a known privacy risk.
• PEI (Permanent Equipment Identifier) — device IMEI. Sent only after NAS security activation in properly-deployed networks.

The Alonso et al. (2021) research demonstrated SUCI decryption in lab conditions against operators with weak home network public keys, and the null-scheme variant is observed in early-deployment operators.

Legal and Regulatory Considerations

Telecom red team engagements carry the strictest legal regime of any skill in the workspace. Every engagement must address:

• Frequency licensing — Active transmission on licensed cellular bands requires the operator's authorization AND (in most jurisdictions) a regulator-issued test license. Passive reception is legal in most jurisdictions; active transmission is not. Section 5 of guides/5g-telecom-attack-deep-dive.md (IMSI catcher detection) is strictly passive.
• Jammer laws — In the US, 47 USC §333 prohibits jamming. In the EU, national implementations of the Radio Equipment Directive prohibit jamming. Most other jurisdictions have equivalents. The skill explicitly excludes jammer testing from scope.
• Production subscriber data — NEVER use production IMSIs/SUPIs in testing. Always provision engagement-scoped test subscribers (MCC 001 / MNC 01 test PLMN or the operator's designated test range).
• Roaming partner authorization — Any Diameter S6a, SS7 MAP, or SEPP N32 testing that touches the roaming interconnect requires explicit written authorization from BOTH the home AND visited networks.
• GSMA coordinated disclosure — Operator-side findings are coordinated via GSMA FS-IS (Fraud and Security Intelligence Group) and 3GPP SA3 Liaison. Reference GSMA FS.32 (SS7), FS.33 (Diameter/SEPP), and the operator's roaming agreement security clauses.
• Regulator notification — In many jurisdictions (EU NIS2, US FCC), a confirmed operator-side vulnerability with subscriber impact triggers regulatory notification. Confirm with the operator's legal team before filing.

PFCP Attack Surface Deep Dive

The Packet Forwarding Control Protocol (PFCP, 3GPP TS 29.244) is the N4 interface between SMF and UPF. PFCP installs forwarding rules per subscriber session, addressed by a 64-bit SEID (Session Endpoint Identifier). Key attack surface:

• Unauthenticated source — Most UPFs trust any PFCP message from UDP 8805 that arrives from the SMF's IP. An attacker who can spoof the SMF source (or send from a peer SMF in multi-SMF deployments) can inject forged PFCP Session Deletion or Modification Requests.
• SEID predictability — Lab UPFs (Open5GS, free5GC) often start SEIDs at 1 and increment monotonically. Production UPFs use random 64-bit SEIDs. Predictable SEIDs lower the bar for blind injection.
• Praetorian (2019) class — Inject a PFCP Session Deletion Request with a captured SEID from a non-SMF vantage → subscriber session torn down → DoS for every subscriber whose session the UPF drops.
• Redirection variant — Inject a PFCP Session Modification Request changing the far-end F-TEID to an attacker-controlled endpoint → subscriber uplink traffic redirected to attacker → exfiltration.
• Mitigation — DTLS on N4 (TS 33.501 §6.6.2), UPF source IP allowlist, per-session SEID validation against SMF peer, monitoring for PFCP Session Deletion Requests without SMF-initiated cause.

Diameter and SS7 Attack Surfaces

The 4G/LTE Diameter S6a interface and the 2G/3G SS7 MAP interface carry the same abuse class. An attacker with access to a roaming peer (or stolen peer credentials) can:

• Update-Location-Request (ULR) — cmd-code 316 in Diameter, "updateLocation" operation in SS7 MAP. Retrieve authentication vectors for any IMSI in any home network. The vulnerable HSS/HLR returns vectors without verifying the visited-network context.
• Provide-Subscriber-Info (PSI) — cmd-code 838903 in Diameter, "provideSubscriberInfo" operation in SS7 MAP. Retrieve subscriber location (cell ID, VLR address) for any IMSI.
• Insert-Subscriber-Data (IDR/ISD) — Modify subscriber profile fields (e.g., charging profile, service flags) from a visited peer.

The Positive Technologies (2017-2023) research series documented these for multiple operators. Mitigation requires deployment of a signaling firewall (GSMA FS.32 for SS7, FS.33 for Diameter/SEPP) that enforces IMSI↔visited-network pair validation.

O-RAN Security Architecture

The O-RAN Alliance architecture exposes new interfaces with new attack surfaces:

• O1 (Operations) — NETCONF/RESTCONF (SSH 830, HTTPS 443). Vulnerabilities: default credentials on O-RU/O-DU/O-CU, weak TLS (TLSv1.0/1.1), command injection in YANG model string inputs.
• O2 (Cloud-Native) — Kubernetes API (6443). Vulnerabilities: over-permissive RBAC, unauthenticated Helm chart deployment, container escape to host.
• E2 (Near-RT RIC) — E2AP over SCTP (38472/38473). Vulnerabilities: unauthenticated E2AP, weak mTLS, malicious xApp deployment.
• A1 (Non-RT RIC) — HTTP/2 (443). Vulnerabilities: shared bearer tokens, unscoped OAuth2.

The O-RAN Alliance WG11 (Security) specifications define the required controls. Adoption is uneven in early deployments; engagements frequently find default credentials and unauthenticated management interfaces.

Detection Methods

5G Core (SBA) Detection

• SBI anomaly detection: Northbound API requests from unexpected Network Functions (NF); abnormal requester-respondent patterns.
• Diameter/SIP signaling storms: Signaling rate exceeding baseline (typical: 100+ req/sec per subscriber = abnormal).
• AUSF/UDM anomaly: Authentication vector requests for inactive IMSIs; spikes in SUCI (Subscription Concealed Identifier) decapsulation failures.
• Network slice abuse: Cross-slice traffic; slice-isolated NF receiving requests from wrong slice.

Radio Access Network (RAN) Indicators

• IMSI Catcher signatures: Tracking Area Update (TAU) storms; cells with same PLMN but unusual TAC; base stations advertising higher signal strength than legitimate cells.
• Rogue gNodeB: Cell ID not in operator database; tracking area code mismatch; broadcast signals in licensed spectrum without authorization.
• 5G Stingray detection: Sudden downlink-only cells; absence of uplink grants; subscriber handovers to unexpected cell IDs.
• SS7/Diameter attackers: MAP/ULP/SLh messages from non-roaming partners; international signaling partners routing through unexpected STPs.

Core Network Behavioral Indicators

• Subscriber cloning: Multiple simultaneous sessions for same IMSI/SUPI; geographic impossibility (login from two cities <5 min apart).
• SMS/voice interception: SCP anomalies; SMS home routing bypass; signaling links avoiding legitimate SMSC.
• GTP-U anomaly: User plane tunnels between unrelated UEs; uplink traffic without corresponding downlink.

SIEM / Probe Detection

• 5G probe: Active probes (Keysight, Polystar, Empirix) for traffic analysis; detect signaling storms and protocol violations.
• Tennison / OSS-FS: Diameter/SIP firewall rules; alert on malformed AVPs, unknown application IDs.
• Splunk SPL (telecom probe): index=5g sourcetype=diameter | stats count by calling_party | where count > 1000

Defense Evasion Techniques

IMSSI Catcher Stealth

• 5G Stingray improvements: 5G uses SUPI (concealed via SUCI), making catchers less effective; attackers use pseudo-base stations to force fallback to 4G/3G where IMSI is plaintext.
• Downlink-only operation: Receive-only IMSSI catchers don't page subscribers; harder to detect.
• Burst operation: Operate for short windows (<30 seconds) to avoid drive-by detection vehicles.
• Mimic legitimate cells: Copy PLMN, TAC, Cell ID from nearby legitimate cells; only differ in physical layer signature.
• Directional antennas: Limit catchment area to target device only; reduces collateral detections.

Signaling Attack Stealth

• Slow & low: Pace attacks below signaling firewall threshold (typically 5-10 req/sec).
• Distributed source: Spread attacks across multiple signaling partners; aggregate at target.
• Use compromised roaming partners: Route through legitimate roaming STPs; appears as roaming traffic.
• Off-hours timing: Execute during network maintenance windows (3-6 AM local); blends with test traffic.
• Spoofed originating country: Use signaling partners from low-monitoring jurisdictions.

Network Slice Exploitation Stealth

• Reuse legitimate slice credentials: Don't create new slice; abuse existing slice isolation weaknesses.
• Cross-slice via legitimate APIs: Use Nnrf, Namf to pivot between slices; appears as legitimate NF.
• Slice-isolated eMBB: Use eMBB slice for massive bandwidth abuse (DDoS or crypto mining).

CPE / UE Side Channel

• AT command abuse: Send AT commands to compromised UE that exfiltrate SIM data via cellular control channel.
• OEM diagnostic mode: Use Samsung / Qualcomm diagnostic mode to bypass normal cellular security.
• Baseband exploit via WiFi calling: WiFi calling bypasses cellular checks; abuse baseband firmware via WiFi attack surface.

Real-World Incident Timeline

The 5G/telecom attack class is one of the oldest in information security. Major public milestones:

• 2008 (Tobias Engel, 25C3) — Demonstrated SS7 MAP location tracking and call/SMS interception at the Chaos Communication Congress.
• 2014-2016 (Karsten Nohl, BlackHat / 31C3) — Demonstrated SS7-based interception of calls and SMS of members of multiple national governments.
• 2017-2023 (Positive Technologies) — Series demonstrating the same abuse class on Diameter (4G/LTE S6a) and early 5G interconnect.
• 2019 (Praetorian) — 5G core PFCP DoS vulnerability disclosure. Demonstrated mass session teardown via forged PFCP Session Deletion Request on N4.
• 2021 (Alonso et al.) — SUCI/SUPI privacy analysis demonstrating that 5G's ECIES protection scheme is vulnerable when the operator uses a weak or known-compromised home network public key.
• 2023 (Positive Technologies) — Updated 5G core research identifying ongoing SEPP pass-through misconfigurations and inter-operator abuse.

Each incident drove a control response: GSMA FS.32 (SS7 firewall), FS.33 (Diameter/SEPP), 3GPP TS 33.501 §6.6 (N4 DTLS), §6.12 (SUCI), §6.2.6 (SEPP). Engagements verify that operators have actually deployed the control in enforcement mode, not pass-through.

3GPP Specification Reference

The 3GPP specifications referenced throughout this skill:

• TS 23.501 — 5G System Architecture
• TS 23.502 — 5G System Procedures
• TS 23.503 — 5G Policy and Charging Control
• TS 24.501 — 5G NAS Protocol
• TS 29.244 — PFCP (N4)
• TS 29.281 — GTP-U
• TS 29.274 — GTP-C v2
• TS 29.272 — Diameter S6a
• TS 29.500 — Service-Based Architecture (SBI)
• TS 33.501 — 5G Security Architecture and Procedures
• TS 33.401 — 4G/LTE Security Architecture
• TS 38.331 — 5G RRC (SIB1 contents)
• TS 38.413 — NGAP

GSMA references: FS.32 (SS7), FS.33 (Diameter/SEPP), IR.21 (roaming data exchange).

Standardization Bodies

• 3GPP (3rd Generation Partnership Project) — Defines the 5G, 4G, 3G, and 2G specifications. The SA3 working group is responsible for security.
• GSMA (Global System for Mobile Communications Association) — Operator industry body. The FS-IS (Fraud and Security Intelligence Group) coordinates vulnerability disclosure.
• O-RAN Alliance — Defines the open RAN architecture. WG5 (E2), WG10 (O1/O2), WG11 (Security).
• IETF — Defines SCTP, DTLS, HTTP/2, JOSE (JWS/JWE), OAuth2.
• ENISA (European Union Agency for Cybersecurity) — Publishes the 5G Threat Landscape.
• NIST — Publishes the 5G Cybersecurity Practice Guide (draft series).

Skill Maturity and Coverage

This skill covers the cellular network stack from the radio PHY (SDR) up to the inter-operator roaming boundary. Coverage by 3GPP reference point:

Reference Point	Coverage	Test Case	Payload Section
N1 (NAS)	Full	TC-5G-009, 012, 016	§11, §16
N2 (NGAP)	Full	TC-5G-002, 012	§3, §16
N3 (GTP-U)	Full	TC-5G-004, 012	§6, §16
N4 (PFCP)	Full	TC-5G-003, 013, 014	§4
N6 (UPF to DN)	Partial	TC-5G-011	§15
N32 (SEPP)	Full	TC-5G-018	§14
S6a (Diameter)	Full	TC-5G-006, 015	§8
SS7/MAP	Full	TC-5G-007	§9
O1 (O-RAN)	Full	TC-5G-010	§13
E2/A1 (O-RAN RIC)	Full	TC-5G-017	§13
Slicing	Full	TC-5G-011	§15
SBI / NRF	Partial	TC-5G-011	§15

Coverage Gaps and Future Work

The following areas are identified for future skill expansion:

• 5G LAN-type service — TS 23.501 §5.30. Layer 2 PDU session for industrial deployments.
• 5G ProSe (Proximity Services) — TS 23.303. Device-to-device communication.
• Network exposure function (NEF) abuse — SBI to third-party APIs. Potential for unauthorized API access.
• Multi-access Edge Computing (MEC) — UPF collocation with edge apps. New attack surface at the UPF-application boundary.
• 5G slicing for enterprise — Private 5G deployments with custom slices. Slice-as-a-trust-boundary implications.
• SATCOM / non-terrestrial networks (NTN) — 5G over satellite. New propagation and authentication challenges.

These gaps are tracked in MEMORY.md and will be addressed in future skill expansions.