| name | match-data-file |
| description | Match data file describes how to add dat asegments to a C file. Use the match data file skill when you need to match a data file. |
Match a Data File
Update snowboardkids.yaml
Code, data, rodata and bss are all defined as separate segments in snowboardkids.yaml. The first step of matching a new data segment is to update the appropriate data segment entry to mark is as defined in the existing C file (code segment).
For example if you are asked to match the data segment for code segment 0x8A40:
- [0x88D30, data, 8A40]
Should be changed to:
- [0x88D30, .data, 8A40]
Rebuild the Project (Build Fails)
Rebuild the project by running:
./tools/build-and-verify.sh
The build will now fail because we have not yet added the expected data. But these error messages can be instructive for telling us what data is needed, etc.
Update C File
Examine the assembly code for the data segment, this is located in asm/data/. So our above example would be located in asm/data/8A40.data.s. Remember that the N64 rom is big endian.
Take the labeled data from the data file and add the appropriate variable definitions to the C file (`src/8A40.c in our example).
Note that the C file will have missing data definitions already but they will be externs. You should add the variable definitions in the order in which they appear in the data file (do not follow the ordering of the externs).
Build and Fix Matching Issues
Rebuild the project by running:
./tools/build-and-verify.sh
You will likely encounter build errors or checksum failures. Work through the errors and resolve any checksum mismatches.
