Menü
SkillsMP hat 16 Skills aus danielrosehill/Claude-Hardware-Spec-Assembly-Plugin gesammelt. Öffne einen Skill, um Quelle und Details zu prüfen.
Es werden 16 von 16 gesammelten Skills angezeigt.
Build a structured hardware specification and BOM for a project. Walks the user through goals, constraints, and functional requirements, then produces a markdown spec plus a structured BOM (parts, quantities, rationale) saved into the project directory.
Quellsprache: Englisch
Estimate the total cost of a project's BOM. Reads bom.json from a project, applies typical price ranges per vendor (informed by the user's preferred suppliers and location), and produces low/mid/high cost envelopes plus shipping considerations.
Quellsprache: Englisch
Produce a PCB design starting point from a project's BOM and wiring spec — schematic netlist, board stack-up and layout guidance, and ESP32-specific rules (antenna keep-out, strapping pins, decoupling). Output is KiCad/EasyEDA-ready design input, not finished…
Quellsprache: Englisch
Produce a textual wiring specification — pin map, connection table, and power distribution — suitable for handoff to a diagram tool (Fritzing, KiCad, Wokwi, draw.io) or for direct use during breadboarding. Not a graphical diagram itself.
Quellsprache: Englisch
Live web research for a project's components. Starting from a defined objective (integrations, radios, sensors) or an existing BOM, searches the web and the user's preferred marketplaces (AliExpress, Adafruit, Mouser, etc.) for real candidate parts with…
Quellsprache: Englisch
Recommend specific vendors for each BOM line, biased by the user's location and preferred suppliers. Produces a sourcing plan with vendor, expected lead time, and trade-offs (price vs. authenticity vs. speed).
Quellsprache: Englisch
Start from a free-form project description and work backwards to a candidate BOM. Lighter-weight than create-hardware-spec — used when the user wants a quick parts list to evaluate feasibility before committing to a full spec.
Quellsprache: Englisch
Query a user-defined MCP-connected inventory system to check live stock for a project's BOM. Use this when the user has a real inventory backend (warehouse management system, parts database, home-lab inventory) wired up via MCP, rather than a static on-hand…
Quellsprache: Englisch
Diff a project's BOM against the user's local on-hand inventory (the free-form list captured during onboarding). Reports which parts are already available, which need to be ordered, and which have plausible substitutes on hand.
Quellsprache: Englisch
Sanity-check the parts in a BOM against each other — voltage levels, logic-level compatibility, current draw vs. regulator capacity, I2C address conflicts, shared bus contention, and pin count adequacy on the chosen MCU. Flags issues before the user orders.
Quellsprache: Englisch
Generate step-by-step assembly instructions for a project — the order in which to wire/solder/mount parts, test gates between steps, and common gotchas. Reads the BOM, wiring spec, and datasheet quirks; writes a build guide the user can follow on the bench.
Quellsprache: Englisch
Fetch and summarise the datasheet for a part (or all parts in a project's BOM). Pulls the official PDF when locatable, extracts pinout, electrical characteristics, and typical application notes, and writes a per-part reference into the project directory.
Quellsprache: Englisch
Export a project's BOM (and optionally sourcing plan) to CSV and a clean markdown table. Useful for sharing with collaborators, pasting into a spreadsheet, or feeding into ordering workflows.
Quellsprache: Englisch
Generate visual mockups of the finished hardware project using fal.ai's nano-banana (Gemini 2.5 image) model. Useful for early-stage visualisation, communicating intent to collaborators, or scoping enclosure design before any parts arrive.
Quellsprache: Englisch
First-run setup for hardware-spec-assembly. Captures the user's location, preferred parts vendors, the kinds of hardware projects they typically work on (e.g. ESP32-based sensors, robotics), and the gear/components they already have on hand. Writes a profile…
Quellsprache: Englisch
Suggest 3D-printable parts that would complement the project — enclosures, mounts, brackets, knobs, jigs. Where possible, points to existing models on Printables / Thingiverse / MakerWorld; otherwise specifies dimensions and constraints for a custom design.
Quellsprache: Englisch