databricks-autonomous-operations

name	databricks-autonomous-operations
description	End-to-end autonomous deployment and operations skill. Deploys Databricks Asset Bundles, runs jobs and pipelines, polls for completion, diagnoses failures, applies fixes, redeploys, and verifies — all without human intervention. Also serves as SDK/CLI/REST API reference. Use when deploying bundles, running jobs, monitoring pipelines, troubleshooting ANY failure, or operating in a self-healing deploy-fix-redeploy cycle. Triggers on "deploy", "bundle deploy", "run job", "run pipeline", "make it work", "job failed", "troubleshoot", "fix and redeploy".
metadata	{"author":"prashanth subrahmanyam","version":"3.2","domain":"operations","role":"shared","used_by_stages":[1,2,3,4,5,6,7,8,9],"called_by":["bronze/00-bronze-layer-setup","silver/00-silver-layer-setup","gold/01-gold-layer-setup","semantic-layer/00-semantic-layer-setup","monitoring/00-observability-setup","ml/00-ml-pipeline-setup","genai-agents/00-course-orchestrator"],"dependencies":["admin/self-improvement"],"triggers":["deploy","bundle deploy","bundle run","run job","run pipeline","make it work","deploy and run","deploy and fix","job failed","monitor job","troubleshoot","get-run","run output","task failed","redeploy","job status","pipeline failed","DLT error","cluster issue","monitor failed","alert failed","deploy failed","databricks-sdk","databricks-connect","CLI","INTERNAL_ERROR","UNRESOLVED_COLUMN","ModuleNotFoundError","TABLE_OR_VIEW_NOT_FOUND","ResourceAlreadyExists","PERMISSION_DENIED","self-heal","[Truncated]"],"last_verified":"2026-06-02","volatility":"medium","clients":["ide_cli","genie_code"],"deploy_verb":"bundle deploy --target dev","deploy_note":"operations/CLI reference — on Genie Code every databricks command routes via runDatabricksCli FROM THE BUNDLE EDITOR (dp_bundle_root); a blocked bundle deploy/run is a page-context signal, NEVER substitute SDK/REST creation (RULE_10); see genie-code-environment","coverage":"all_stages","upstream_sources":[{"name":"databricks-agent-skills","repo":"databricks/databricks-agent-skills","paths":"[Truncated]","relationship":"extended","last_synced":"2026-08-30","sync_commit":"ca92a6c"}]}

Databricks Autonomous Operations

1. Overview

Context Loading Rule: Load this skill at deployment time, not during planning. During earlier phases, retain only this 3-step summary in working memory: Deploy (bundle deploy) → Poll (get-run / pipelines get) → Verify (get-run-output). Full skill activation should happen when the first bundle deploy or bundle run is invoked.

This skill is both an SDK/CLI/Connect reference and an autonomous operations playbook. It teaches the AI agent to operate as an SRE — independently deploying, monitoring, diagnosing failures, applying fixes, redeploying, and verifying results across all Databricks resource types.

Core Loop: Deploy → Poll → Diagnose → Fix → Redeploy → Verify (max 3 iterations before escalation to user).

When to Activate This Skill

• Deploying or running Databricks Asset Bundles (bundle deploy, bundle run)
• Monitoring job or pipeline runs for completion
• Troubleshooting ANY failure: jobs, DLT pipelines, monitors, alerts, clusters, Genie Spaces
• Using the Databricks Python SDK, CLI, Connect, or REST API
• Encountering error messages from Databricks services
• Operating in a self-healing deploy-fix-redeploy cycle
• Checking job/task/pipeline status or retrieving run output

SDK Docs: https://databricks-sdk-py.readthedocs.io/en/latest/ GitHub: https://github.com/databricks/databricks-sdk-py

Runnable Examples: See examples/ directory for complete, copy-pasteable scripts:

• examples/1-authentication.py — All auth patterns (env vars, profiles, Azure SP, AccountClient, notebook context)
• examples/2-clusters-and-jobs.py — Cluster auto-selection, autoscaling, job CRUD, submit_and_wait, run_now_and_wait
• examples/3-sql-and-warehouses.py — Parameterized queries, chunked results, query_to_dataframe helper
• examples/4-unity-catalog.py — Tables, schemas, catalogs, volumes, file operations, pattern matching
• examples/5-serving-and-vector-search.py — Endpoint creation with TrafficConfig, chat/embedding queries, vector search with filters
• examples/6-autonomous-operations.py — Job monitoring, multi-task output retrieval, failure diagnosis, self-healing loop

---

2. Environment & Authentication

Client routing (RULE_1/2/4 — read once, applies to every command in this skill). This skill is the CLI/SDK operations surface; the same operations run on both clients via different channels — deploy mechanics are owned by databricks-asset-bundles (the spine); reference it rather than re-deriving them.

• IDE (Cursor): the local databricks CLI; auth via databricks auth login / ~/.databrickscfg; databricks-connect is available for local Spark.
• Genie Code has three execution paths — try them in order; "blocked on one path ≠ impossible":
  1. runDatabricksCli — the allow-listed, pre-authenticated CLI path (no auth login). The path for bundle validate / summary / deploy --target dev and read verbs. --version/help/ auth token/aitools/apps validate/apps manifest are hard-blocked; apps deploy is unreliable here (page-dependent + CWD-defeated). Use a bundle validate behavior probe instead of a numeric --version compare.
  2. Python SDK (WorkspaceClient via executeCode) — the most capable path: it bypasses the CLI allow-list and is the reliable way to w.apps.deploy(...), retrieve w.config.token, and poll deployment/run state. Caveat: the SDK has no bundle-deploy equivalent (bundle deploy is a composite client-side operation) — keep bundle deploy on runDatabricksCli.
  3. Native tools (createAsset/readTable/…) for governed asset operations.
  No local Spark on Genie Code (use workspace serverless; databricks-connect is IDE-only). Full allow-list / CWD / FUSE / escape-hatch detail is in the genie-code-environment skill — load it on demand. The CLI command examples below run via path 1 on Genie Code (local shell on the IDE); where a verb is CLI-blocked, reach for the SDK (path 2).

⛔ The carve-out the "fall to the SDK" rule does NOT cover — bundle deploy/run and resource creation. "Blocked ≠ impossible, try the SDK" is for read-only / ad-hoc ops (polling, inspecting schemas, lineage, token retrieval, apps deploy). It is NOT a license to substitute the SDK/REST for the bundle. When bundle deploy/run is blocked, that is a page-context signal, not a dead end: the verb is gated to the bundle-folder page, which on Genie Code you reach by opening the "Open in bundle editor" affordance on the dp_bundle_root folder (the bundle editor's CWD is the bundle root, where validate/deploy/run are pre-approved). FIELD-CONFIRMED: the same bundle deploy that returned "blocked by safety guardrails" / "databricks.yml not found" from a file/notebook page returned "Deployment complete!" and bundle run … SUCCESS from the bundle editor. So the fix is navigate to the bundle editor, never w.jobs.create() / POST /api/2.1/jobs/create / POST /api/2.0/pipelines / CREATE TABLE via executeCode. Creating jobs/pipelines/tables directly is the RULE_10 authoring-discipline violation — it produces live, un-versioned state that diverges from the bundle and is the exact regression this spine prevents. If bundle deploy/run still fails from the bundle editor, STOP and report the blocker — the SDK/REST creation route is an escape hatch only on explicit operator authorization. Surface a clickable bundle-editor link: file_id = w.workspace.get_status("<dp_bundle_root>/databricks.yml").object_id, folder_id = w.workspace.get_status("<dp_bundle_root>").object_id, link = {w.config.host}/editor/files/{file_id}?o={w.get_workspace_id()}&contextId=folder%3A{folder_id}. Detail in genie-code-environment §3/§8.

Setup

• SDK: uv pip install databricks-sdk; Connect (IDE-only): uv pip install databricks-connect — not used on Genie Code (serverless; no local Spark)
• CLI version: >= 0.278.0 on the IDE (databricks --version); on Genie Code the version is not introspectable (use a bundle validate behavior probe)
• Config (IDE): ~/.databrickscfg or env vars DATABRICKS_HOST, DATABRICKS_TOKEN; Genie Code is pre-authenticated in-session

Quick Auth

from databricks.sdk import WorkspaceClient
w = WorkspaceClient()                    # Auto-detect (env, config file, or notebook)
w = WorkspaceClient(profile="MY_PROFILE") # Named profile

• Token expired? (IDE path) databricks auth login --host <url> --profile <name> — N/A on Genie Code (pre-authenticated)
• Profile-based CLI: DATABRICKS_CONFIG_PROFILE=<name> databricks <command>
• Full auth patterns (Azure SP, AccountClient, etc.): see references/sdk-api-reference.md

---

3. SDK API Quick Reference

Full code examples and patterns: references/sdk-api-reference.md Runnable scripts: examples/ directory (see file listing in Section 1)

API	Key Operations	Critical Notes
Clusters	list, get, create_and_wait, ensure_cluster_is_running, start, stop	Use select_spark_version() and select_node_type()
Jobs	list, run_now_and_wait, submit_and_wait, get_run, get_run_output, cancel_run	get_run_output needs task run_id, not parent job run_id
SQL Execution	execute_statement with wait_timeout	Use StatementParameterListItem for parameterized queries
Warehouses	list, start, stop, create_and_wait	Use auto_stop_mins to control costs
Unity Catalog	tables.list, tables.get, tables.exists, catalogs.list, schemas.list	list_summaries for fast pattern matching
Volumes/Files	files.upload, files.download, files.list_directory_contents	Path format: /Volumes/catalog/schema/volume/file
Serving	create_and_wait, query (custom/chat/embeddings), get_open_ai_client	scale_to_zero_enabled for cost control
Vector Search	query_index, upsert_data_vector_index, sync_index	Use filters_json for filtered queries
Pipelines	list_pipelines, get, start_update, stop_and_wait, list_pipeline_events	Events contain error details for troubleshooting
Monitors	quality_monitors.get, delete, update, run_refresh	Update MUST include ALL custom_metrics
Alerts V2	alerts_v2.create_alert, update_alert, delete_alert	Update requires full update_mask
Secrets	create_scope, put_secret, get_secret	Use for API keys, tokens

Critical Patterns

• Async apps (FastAPI): SDK is synchronous — wrap with asyncio.to_thread()
• Long-running ops: Use _and_wait() variants with timeout=timedelta(...)
• Error handling: from databricks.sdk.errors import NotFound, PermissionDenied, ResourceAlreadyExists
• Direct REST: w.api_client.do(method="GET", path="/api/2.0/...")

---

4. CLI Operations Reference

Command Matrix

Category	Command	Purpose
Bundle	databricks bundle validate	Pre-deploy validation (catches ~80% of errors)
Bundle	databricks bundle deploy -t <target>	Deploy all resources
Bundle	databricks bundle run -t <target> <job>	Start a job run
Bundle	databricks bundle destroy -t <target>	Cleanup all resources
Jobs	databricks jobs get-run <RUN_ID> --output json	Get run status
Jobs	databricks jobs get-run-output <TASK_RUN_ID> --output json	Get task notebook output
Jobs	databricks jobs list-runs --job-id <JOB_ID> --output json	List recent runs
Jobs	databricks jobs cancel-run <RUN_ID>	Cancel running job
Pipelines	databricks pipelines get <PIPELINE_ID> --output json	Get pipeline status
Pipelines	databricks pipelines get-update <PID> <UID> --output json	Get update details
Pipelines	databricks pipelines list-pipeline-events <PID> --output json	Get events/errors
Pipelines	databricks pipelines start-update <PIPELINE_ID>	Start pipeline update
Clusters	databricks clusters get <CLUSTER_ID> --output json	Get cluster status
Clusters	databricks clusters events <CLUSTER_ID> --output json	Get cluster events
Warehouses	databricks warehouses get <WH_ID> --output json	Get warehouse status
Auth (IDE only)	databricks auth login --host <url> --profile <name>	Re-authenticate (Genie Code is pre-authenticated)
Workspace	databricks workspace export <path> --format SOURCE	Export notebook
Apps	databricks apps logs <app-name>	App deployment/runtime logs

Key jq Patterns

See references/cli-jq-patterns.md for the complete catalog. Most critical:

# Job state
databricks jobs get-run <RUN_ID> --output json | jq '.state'

# Task summary for multi-task jobs
databricks jobs get-run <RUN_ID> --output json | jq '.tasks[] | {task: .task_key, run_id: .run_id, result: .state.result_state}'

# Failed tasks only
databricks jobs get-run <RUN_ID> --output json | jq '.tasks[] | select(.state.result_state == "FAILED") | {task: .task_key, error: .state.state_message, url: .run_page_url}'

# Task output (MUST use task run_id, not parent job run_id)
databricks jobs get-run-output <TASK_RUN_ID> --output json | jq -r '.notebook_output.result // "No output"'

---

5. Autonomous Deploy-Run-Fix Playbook

This is the core workflow. Follow these steps whenever deploying a bundle, running a job, or operating autonomously.

Step 0: Discover Bundle Resources

Before deploying, understand what's in the bundle:

# Read databricks.yml to find targets and included resources
# Then read resource YAML files under resources/ directory
# Identify: jobs (atomic/composite/orchestrator), pipelines, dashboards, alerts

Determine the target (dev, staging, prod) from the user or default to dev.

Step 0.5: Resolve Workspace Identity

Before ANY deployment, confirm you are targeting the correct workspace:

1. Check databricks.yml for workspace.host and profile under the target
2. Check active profile: databricks auth env --profile <name> — verify host matches intent
3. If multiple profiles exist in ~/.databrickscfg, do NOT auto-select — present options to user
4. If databricks.yml has no profile set, ask the user which workspace to target
5. Scan repo context before creating a new databricks.yml: Glob for **/databricks.yml across the repository. If an existing bundle config specifies host or profile, surface those as the suggested default in your question to the user. Example: "Your existing app config at apps_lakebase/databricks.yml uses profile azure-demo → host https://adb-xxx.azuredatabricks.net/. Should I use that same workspace for this bundle?"
6. When bundle validate reports "multiple profiles matched" the host, include the repo-context hint in your question rather than listing all candidates blindly. Example: "Multiple profiles match this host. Your apps_lakebase/databricks.yml uses profile azure-demo — should I use that, or a different one?"

CLI profile inheritance warning: Raw databricks api calls do NOT inherit the profile from databricks.yml. Always pass -p <profile> explicitly when using databricks api.

If deployed to wrong workspace → see Step 7.5 for cleanup.

Step 1: Validate & Deploy

Client note: IDE runs these in a terminal. Genie Code runs databricks bundle … via runDatabricksCli from the bundle editor — open the "Open in bundle editor" affordance on the dp_bundle_root folder (the icon that appears next to databricks.yml) before deploying; the bundle editor's CWD is the bundle root, where validate/deploy/run are pre-approved. Surface the clickable editor link for the operator (see §2 carve-out). See skills/genie-code-environment §3.

databricks bundle validate -t <target>   # Pre-flight — catches ~80% of errors
databricks bundle deploy -t <target>     # Deploy all resources

If validate fails: Read the error, fix the YAML (see Section 6 + skills/databricks-asset-bundles skill), re-validate. If deploy is BLOCKED (≠ failed — Genie Code): symptoms are "blocked by safety guardrails," "not in the allow-list," or "databricks.yml not found." This is a page-context signal, not a YAML/code defect and not a job failure. Do not enter the diagnose-fix loop and do not create resources via SDK/REST/CREATE as a substitute (RULE_10 violation). Navigate to the bundle editor on dp_bundle_root and retry. Only on explicit operator authorization is the escape hatch (§2) permitted. If deploy FAILS (executes, returns an error): Common causes: auth expired (403), path resolution errors, invalid task types. See Section 6. --force clarification: --force handles Terraform state drift only (e.g., resource deleted outside bundle). It does NOT fix API name-uniqueness conflicts. For "pipeline name already used" or "resource already exists": list and delete the conflicting resource, then redeploy without --force.

Step 2: Run

For jobs:

databricks bundle run -t <target> <job_name>
# Output includes a Run URL like: https://<host>/#job/<JOB_ID>/run/<RUN_ID>
# EXTRACT the RUN_ID from this URL — you need it for polling

For DLT pipelines:

databricks bundle run -t <target> <pipeline_name>
# Output includes: Pipeline URL with PIPELINE_ID
# Also shows UPDATE_ID for this specific update

Cursor-specific: Use block_until_ms: 0 to background bundle run immediately. Then read the terminal output file to capture the Run URL. Parse the RUN_ID or PIPELINE_ID from the URL.

Step 3: Poll Until Terminal State

Jobs — poll with exponential backoff (30s → 60s → 120s):

databricks jobs get-run <RUN_ID> --output json | jq -r '.state.life_cycle_state'
# PENDING → RUNNING → TERMINATED (also: INTERNAL_ERROR, SKIPPED)

When life_cycle_state == TERMINATED, check the result:

databricks jobs get-run <RUN_ID> --output json | jq -r '.state.result_state'
# SUCCESS → go to Step 4a    FAILED → go to Step 4b

DLT Pipelines — poll the latest update state:

databricks pipelines get <PIPELINE_ID> --output json | jq -r '.latest_updates[0].state'
# COMPLETED → success    FAILED → get events for errors

Step 4a: On SUCCESS — Verify & Report

# For multi-task jobs, verify all tasks succeeded:
databricks jobs get-run <RUN_ID> --output json \
  | jq '.tasks[] | {task: .task_key, result: .state.result_state}'

# Get task output (structured JSON from dbutils.notebook.exit):
databricks jobs get-run-output <TASK_RUN_ID> --output json \
  | jq -r '.notebook_output.result // "No output"'

Report success to user with the Run URL for verification. If this was part of a multi-job deployment, proceed to the next job.

Step 4b: On FAILURE — Diagnose

CRITICAL for multi-task jobs: get-run-output only works on the task run_id, NOT the parent job run_id.

# Step A: Find failed tasks and their task-level run_ids
databricks jobs get-run <JOB_RUN_ID> --output json \
  | jq '.tasks[] | select(.state.result_state == "FAILED") | {task: .task_key, run_id: .run_id, error: .state.state_message}'

# Step B: Get detailed output for EACH failed task
databricks jobs get-run-output <TASK_RUN_ID> --output json \
  | jq -r '.notebook_output.result // .error // "No output"'

For DLT pipeline failures:

databricks pipelines list-pipeline-events <PID> --output json \
  | jq '[.events[] | select(.level == "ERROR")] | .[0:5]'

Match the error against Section 6 (decision tree) and references/error-solution-matrix.md.

Step 5: Fix

1. Read the source file(s) identified from the stack trace or error message
2. Apply fix using editor tools (StrReplace, Write)
3. If YAML/config issue → fix the DAB YAML (consult skills/databricks-asset-bundles skill)
4. If dependency issue → deploy upstream assets first (see Section 6 ordering)
5. Same-class fix rule: Before redeploying, grep ALL files from the same generation batch for the same error pattern. If the bug was in one notebook, check sibling notebooks for identical issues. Fix all instances in one pass.

Step 6: Redeploy & Re-run (Loop)

databricks bundle deploy -t <target>    # Redeploy with fix
databricks bundle run -t <target> <job>  # Re-run
# → Return to Step 3 (Poll)

Maximum 3 iterations. Track each iteration's error and fix.

Step 7: Escalation (After 3 Failed Attempts)

Present to the user:

1. All errors encountered — with run IDs, task keys, error messages
2. All fixes attempted — what was changed and why
3. Root cause hypothesis — best guess based on evidence
4. Run page URLs — direct links to the Databricks UI

Step 7.5: Cleanup After Wrong-Workspace Deploy

If resources were deployed to the wrong workspace:

1. Inventory what was deployed: Run databricks bundle summary -t <target> in the wrong workspace
2. Destroy cleanly: databricks bundle destroy -t <target> (requires user confirmation)
3. Warn about persistent artifacts: Tables, schemas, and data created by jobs are NOT removed by bundle destroy — these must be dropped manually
4. Reconcile state: Delete .databricks/ state directory if switching workspaces in the same repo
5. Redeploy to correct workspace: Update profile/target, then restart from Step 0.5

Trigger this step proactively whenever the user says "use profile X" / "switch to workspace Y" / "actually deploy to Z" AND you have already deployed in the current session. Before re-deploying to the new workspace, inventory what is running in the old workspace and offer bundle destroy on it. Do not silently re-deploy — orphaned jobs in the previous workspace are exactly the failure mode this step exists to prevent.

Step 8: Capture Learnings

After every resolved failure (or escalation), trigger admin/self-improvement:

• Add new error → fix mappings to references/error-solution-matrix.md
• Update "Top 10" table in Section 6 if this error is frequent
• Always capture if fix took 2+ iterations or was escalated

---

6. Master Troubleshooting Decision Tree

Full error-solution tables: references/error-solution-matrix.md (7 categories, 40+ patterns) DLT-specific troubleshooting: references/dlt-pipeline-troubleshooting.md Diagnostic SQL queries: references/diagnostic-queries.md

Quick Decision Guide

1. Deployment error? → Check auth (403), YAML syntax, task type (notebook_task not python_task), path resolution
2. Job runtime error? → Get task-level output (use task run_id), match error to solution matrix
3. DLT pipeline error? → Get events via CLI, check upstream tables exist, verify schema
4. Monitor/Alert error? → Check ResourceAlreadyExists (delete+recreate), schema existence, update_mask
5. Dependency error? → Follow required order: Bronze → Gold Setup → Gold Merge → Semantic → Monitoring → Genie
6. Cluster error? → Check events via CLI, look for OOM/unreachable/timeout patterns

Top 10 Most Common Errors (Inline)

Error	Quick Fix
ModuleNotFoundError	Add to %pip install or DAB environment spec
TABLE_OR_VIEW_NOT_FOUND	Run setup job first; check 3-part catalog.schema.table path
DELTA_MULTIPLE_SOURCE_ROW_MATCHING	Deduplicate source before MERGE
Invalid access token (403)	IDE: databricks auth login --host <url> --profile <name> (Genie Code is pre-authenticated — re-check the page/profile)
ResourceAlreadyExists	Delete + recreate (monitors, alerts)
python_task not recognized	Use notebook_task with notebook_path
PARSE_SYNTAX_ERROR	Read failing SQL file, fix syntax, redeploy
Parameter not found	Use base_parameters dict, not CLI-style parameters
run_job_task vs job_task	Use run_job_task (not job_task)
Genie INTERNAL_ERROR	Deploy semantic layer (TVFs + Metric Views) first
bundle deploy "blocked by safety guardrails" / "databricks.yml not found" (Genie Code)	Page context, not a code bug — open the bundle editor on dp_bundle_root and retry; never substitute SDK/REST job creation (RULE_10)

---

7. Job Design for Monitorability

Full patterns: references/job-design-patterns.md — structured output, progress messages, fail-fast, partial success, 3-layer hierarchy.

Key rules:

• Every notebook must dbutils.notebook.exit(json.dumps({...})) with structured status
• Print [Step N/M] progress messages so the agent can locate failures
• Fail fast: include actionable error messages (e.g., "Run bronze_setup_job first")
• 3-layer hierarchy: atomic (notebook_task) → composite (run_job_task) → orchestrator (run_job_task)
• Partial success: ≥90% items succeeding = OK; fix individual failures

---

8. Agent Behavioral Patterns

Background Command Pattern (Cursor-Specific)

For databricks bundle run or any long-running command:

1. Execute with block_until_ms: 0 to background immediately
2. Read the terminal output file to check for completion
3. Parse RUN_ID from the output URL

Exponential Backoff for Polling

• Normal jobs: 30s → 60s → 120s (no state change = increase interval)
• Long-running training jobs: start at 60s, max 300s
• DLT pipelines: 30s (typically faster)

Context Capture on Every Failure

On each failure, record and maintain:

• run_id and task_run_id
• job_name and task_key
• Target environment (dev, staging, prod)
• Full error message
• run_page_url for UI access
• Iteration count (which fix attempt this is)

Self-Healing Loop

Iteration 1: Deploy → Run → Monitor → [FAIL] → Diagnose → Fix → Redeploy
Iteration 2: Run → Monitor → [FAIL] → Diagnose → Fix → Redeploy
Iteration 3: Run → Monitor → [FAIL] → ESCALATE TO USER

Dependency Awareness

Before deploying, verify prerequisites exist:

• Genie Spaces require: TVFs + Metric Views (semantic layer)
• Monitoring requires: Gold tables (populated)
• Gold merge requires: Gold tables (setup job)
• Silver DLT requires: Bronze tables
• Alerts require: Monitoring output tables
• Always follow: Bronze → Gold → Semantic → Monitoring → Alerts → Genie

Partial Success Handling

Some jobs use ≥90% success thresholds:

• Alerting deployment: 27/30 alerts succeeding = OK, fix the 3 individually
• Monitoring setup: 7/8 monitors = OK, debug the 1 failure
• Do NOT fail the entire workflow for 1 out of N items failing

CLI Limitations Awareness

Some diagnostics require the Databricks Workspace UI:

• Full notebook execution logs (when get-run-output returns truncated or empty)
• DLT pipeline data flow visualization
• Detailed Spark execution plans

Always provide run_page_url to the user when CLI output is insufficient.

Learning Capture Pattern (Self-Improvement Integration)

After every troubleshooting session (successful or escalated), run this checklist:

Post-Troubleshooting Self-Improvement:
1. Was this error already in references/error-solution-matrix.md?
   ├── YES → Was the documented fix accurate? If not, update it.
   └── NO  → Add the error pattern and fix to the matrix.

2. Did the initial diagnosis match the actual root cause?
   ├── YES → No action needed.
   └── NO  → Document the misleading signals in the relevant skill.

3. How many iterations were needed?
   ├── 1 → Capture only if error was novel or non-obvious.
   ├── 2-3 → ALWAYS update the relevant skill with the fix.
   └── Escalated → Document what the user found; update skills with user's fix.

4. Is this error likely to recur?
   ├── YES → Ensure it's in Top 10 table (if frequent) or error-solution matrix.
   └── NO  → Document as a one-off note in the session, skip skill update.

Skill priority for updates (search in this order):

1. references/error-solution-matrix.md — error-to-fix mapping
2. common/databricks-autonomous-operations — troubleshooting decision tree
3. skills/databricks-asset-bundles — if deployment-related
4. Domain-specific skill (e.g., gold/pipeline-workers/02-merge-patterns for MERGE errors)
5. New skill — only if all above are irrelevant (see admin/self-improvement justification checklist)

Safety: Never Retry Destructive Operations

Without explicit user confirmation, NEVER retry:

• databricks bundle destroy
• DROP TABLE / DROP SCHEMA
• w.quality_monitors.delete()
• w.alerts_v2.delete_alert()

Safety: Never Substitute Direct Creation for a Blocked Bundle Deploy (RULE_10)

A blocked bundle deploy/run (Genie Code "safety guardrails" / "not in allow-list" / "databricks.yml not found") is a page-context signal, never a license to create the deliverable another way. NEVER, as a workaround for a blocked deploy:

• w.jobs.create() / POST /api/2.1/jobs/create
• w.pipelines.create() / POST /api/2.0/pipelines / createAsset(pipeline)
• w.schemas.create() / CREATE SCHEMA / CREATE VOLUME / CREATE TABLE to provision the deliverable

The fix is navigate to the bundle editor on dp_bundle_root and redeploy. The SDK/REST creation route is an escape hatch only on explicit operator authorization. Likewise, a failed job is fixed by editing the bundle source file under dp_bundle_root and redeploying — never by patching the live job via API/UI.

---

References

Reference Documents (Load on Demand)

• references/sdk-api-reference.md — Full SDK API with code examples for all services
• references/error-solution-matrix.md — Error tables for all 7 resource categories (40+ patterns)
• references/diagnostic-queries.md — SQL queries for investigation
• references/dlt-pipeline-troubleshooting.md — DLT pipeline failure patterns
• references/cli-jq-patterns.md — jq patterns for parsing CLI JSON output
• references/cli-quick-reference.md — CLI vs SDK side-by-side table
• references/job-design-patterns.md — Structured output, progress messages, 3-layer hierarchy

Runnable Examples

• examples/1-authentication.py through examples/6-autonomous-operations.py (see Section 1)

Scripts

• scripts/monitor_multitask_job.sh — Multi-task job monitoring shell script

External Docs

• SDK: https://databricks-sdk-py.readthedocs.io/en/latest/
• GitHub: https://github.com/databricks/databricks-sdk-py

---

See Also

• Authoritative upstream: databricks-agent-skills / databricks-core — back-up reference for canonical Databricks CLI / auth / data exploration patterns.