ferrox-graphify

**STOP -- DO NOT READ THIS FILE. You are already reading it. This prompt was injected into your context by Claude Code's command system. Using the Read tool on this file wastes tokens. Begin executing Step 0 immediately.** **CJS-only (graphify):** `graphify` subcommands are not registered on `ferrox-tools query`. Use the `ferrox_run` launcher shim (defined in each bash block below) or invoke the binary directly: `node <runtime-home>/ferrox-core/bin/ferrox-tools.cjs graphify …` where `<runtime-home>` is your runtime's config directory (e.g. `~/.claude`, `~/.hermes`, `~/.cursor`). See `docs/CLI-TOOLS.md` for details. Other tooling may still use `ferrox-tools query` where a handler exists. ## Step 0 -- Banner **Before ANY tool calls**, display this banner: ``` Ferrox > GRAPHIFY ``` Then proceed to Step 1. ## Step 1 -- Config Gate Check if graphify is enabled by reading `.planning/config.json` directly using the Read tool. **DO NOT use the ferrox-tools config-get command** -- it hard-exits on missing keys unless --default is passed. 1. Read `.planning/config.json` using the Read tool 2. If the file does not exist: display the disabled message below and **STOP** 3. Parse the JSON content. Check if `config.graphify && config.graphify.enabled === true` 4. If `graphify.enabled` is NOT explicitly `true`: display the disabled message below and **STOP** 5. If `graphify.enabled` is `true`: proceed to Step 2 **Disabled message:** ``` Ferrox > GRAPHIFY Knowledge graph is disabled. To activate: node <runtime-home>/ferrox-core/bin/ferrox-tools.cjs config-set graphify.enabled true Then run /ferrox-graphify build to create the initial graph. ``` --- ## Step 2 -- Parse Argument Parse `$ARGUMENTS` to determine the operation mode: | Argument | Action | |----------|--------| | `build` | Run inline build (Step 3) | | `query <term>` | Run inline query (Step 2a) | | `status` | Run inline status check (Step 2b) | | `diff` | Run inline diff check (Step 2c) | | No argument or unknown | Show usage message | **Usage message** (shown when no argument or unrecognized argument): ``` Ferrox > GRAPHIFY Usage: /ferrox-graphify <mode> Modes: build Build or rebuild the knowledge graph query <term> Search the graph for a term status Show graph freshness and statistics diff Show changes since last build ``` ### Step 2a -- Query Run: ```bash _FERROX_SHIM_NAME="ferrox-tools.cjs"; _FERROX_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; FERROX_TOOLS="${_FERROX_RUNTIME_ROOT}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; if [ -f "$FERROX_TOOLS" ]; then ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${_FERROX_RUNTIME_ROOT}/.claude/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${_FERROX_RUNTIME_ROOT}/.claude/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${_FERROX_RUNTIME_ROOT}/.codex/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${_FERROX_RUNTIME_ROOT}/.codex/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif command -v ferrox-tools >/dev/null 2>&1; then FERROX_TOOLS="$(command -v ferrox-tools)"; ferrox_run() { "$FERROX_TOOLS" "$@"; }; elif [ -f "${CLAUDE_CONFIG_DIR:-$HOME/.claude}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CLAUDE_CONFIG_DIR:-$HOME/.claude}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${HERMES_HOME:-$HOME/.hermes}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CODEX_HOME:-$HOME/.codex}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; else echo "ERROR: ferrox-tools.cjs not found at $FERROX_TOOLS and ferrox-tools is not on PATH. Run: npx -y ferrox-factory@latest --claude --local" >&2; exit 1; fi; if [ -n "${CLAUDE_ENV_FILE:-}" ] && [ -n "${FERROX_TOOLS:-}" ]; then printf "export PATH='%s':\"\$PATH\"\n" "${FERROX_TOOLS%/*}" >> "$CLAUDE_ENV_FILE" 2>/dev/null || true; fi ferrox_run graphify query <term> ``` Parse the JSON output and display results: - If the output contains `"disabled": true`, display the disabled message from Step 1 and **STOP** - If the output contains `"error"` field, display the error message and **STOP** - If no nodes found, display: `No graph matches for '<term>'. Try /ferrox-graphify build to create or rebuild the graph.` - Otherwise, display matched nodes grouped by type, with edge relationships and confidence tiers (EXTRACTED/INFERRED/AMBIGUOUS) **STOP** after displaying results. Do not spawn an agent. ### Step 2b -- Status Run: ```bash