qlora

name	qlora
description	Memory-efficient fine-tuning with 4-bit quantization and LoRA adapters. Use when fine-tuning large models (7B+) on consumer GPUs, when VRAM is limited, or when standard LoRA still exceeds memory. Builds on the lora skill.

QLoRA: Quantized Low-Rank Adaptation

QLoRA enables fine-tuning of large language models on consumer GPUs by combining 4-bit quantization with LoRA adapters. A 65B model can be fine-tuned on a single 48GB GPU while matching 16-bit fine-tuning performance.

Prerequisites: This skill assumes familiarity with LoRA. See the lora skill for LoRA fundamentals (LoraConfig, target_modules, training patterns).

Table of Contents

• Core Innovations
• BitsAndBytesConfig Deep Dive
• Memory Requirements
• Complete Training Example
• Inference and Merging
• Troubleshooting
• Best Practices
• References

Core Innovations

QLoRA introduces three techniques that reduce memory usage without sacrificing performance:

4-bit NormalFloat (NF4)

NF4 is an information-theoretically optimal quantization data type for normally distributed weights. Neural network weights are typically normally distributed, making NF4 more efficient than standard 4-bit floats.

Storage: 4-bit NF4 (quantized weights)
Compute: 16-bit BF16 (dequantized for forward/backward pass)

The key insight: weights are stored in 4-bit but dequantized to bf16 for computation. Only the frozen base model is quantized; LoRA adapters remain in full precision.

NF4 vs FP4:

Quantization	Description	Use Case
nf4	Normalized Float 4-bit, optimal for normal distributions	Default, recommended
fp4	Standard 4-bit float	Legacy, rarely needed

Double Quantization

Standard quantization requires storing scaling constants (typically fp32) for each quantization block. Double quantization quantizes these constants too:

First quantization:  weights → 4-bit + fp32 scaling constants
Double quantization: scaling constants → 8-bit + fp32 second-level constants

This saves approximately 0.37 bits per parameter—significant for billion-parameter models:

• 7B model: ~325 MB savings
• 70B model: ~3.2 GB savings

Paged Optimizers

During training, gradient checkpointing can cause memory spikes when processing long sequences. Paged optimizers use NVIDIA unified memory to automatically transfer optimizer states between GPU and CPU:

Normal training: OOM on memory spike
Paged optimizers: GPU ↔ CPU transfer handles spikes gracefully

This is handled automatically by bitsandbytes when using 4-bit training.

BitsAndBytesConfig Deep Dive

All Parameters Explained

from transformers import BitsAndBytesConfig
import torch

bnb_config = BitsAndBytesConfig(
    # Core 4-bit settings
    load_in_4bit=True,              # Enable 4-bit quantization
    bnb_4bit_quant_type="nf4",      # "nf4" (recommended) or "fp4"

    # Double quantization
    bnb_4bit_use_double_quant=True, # Quantize the quantization constants

    # Compute precision
    bnb_4bit_compute_dtype=torch.bfloat16,  # Dequantize to this dtype for compute

    # Optional: specific storage type (usually auto-detected)
    bnb_4bit_quant_storage=torch.uint8,     # Storage dtype for quantized weights
)

Compute Dtype Selection

Dtype	Hardware	Notes
torch.bfloat16	Ampere+ (RTX 30xx, A100)	Recommended, faster
torch.float16	Older GPUs (V100, RTX 20xx)	Use if bf16 not supported
torch.float32	Any	Slower, only for debugging

Check bf16 support:

import torch
print(torch.cuda.is_bf16_supported())  # True on Ampere+

Comparison: Quantization Options

# Recommended: NF4 + double quant + bf16
optimal_config = BitsAndBytesConfig(
    load_in_4bit=True,
    bnb_4bit_quant_type="nf4",
    bnb_4bit_use_double_quant=True,
    bnb_4bit_compute_dtype=torch.bfloat16,
)

# Fallback when bf16 is unsupported
fp16_config = BitsAndBytesConfig(
    load_in_4bit=True,
    bnb_4bit_quant_type="nf4",
    bnb_4bit_use_double_quant=True,
    bnb_4bit_compute_dtype=torch.float16,  # use when bf16 is unsupported or slower
)

# 8-bit alternative (less compression, sometimes more stable)
eight_bit_config = BitsAndBytesConfig(
    load_in_8bit=True,
)

Memory Requirements

Model Size	Full Fine-tuning	LoRA (16-bit)	QLoRA (4-bit)
7B	~60 GB	~16 GB	~6 GB
13B	~104 GB	~28 GB	~10 GB
34B	~272 GB	~75 GB	~20 GB
70B	~560 GB	~160 GB	~48 GB

Notes:

• QLoRA memory includes model + optimizer states + activations
• Actual usage varies with batch size, sequence length, and gradient checkpointing
• Add ~20% buffer for safe operation

GPU Recommendations

GPU VRAM	Max Model Size (QLoRA)
8 GB	7B (tight)
16 GB	7-13B
24 GB	13-34B
48 GB	34-70B
80 GB	70B+ comfortably

Complete Training Example

from transformers import (
    AutoModelForCausalLM,
    AutoTokenizer,
    BitsAndBytesConfig,
    TrainingArguments,
)
from peft import LoraConfig, get_peft_model, prepare_model_for_kbit_training
from trl import SFTTrainer, SFTConfig
from datasets import load_dataset
import torch

# 1. Quantization config
bnb_config = BitsAndBytesConfig(
    load_in_4bit=True,
    bnb_4bit_quant_type="nf4",
    bnb_4bit_use_double_quant=True,
    bnb_4bit_compute_dtype=torch.bfloat16,
)

# 2. Load quantized model
model_name = "meta-llama/Llama-3.1-8B"
model = AutoModelForCausalLM.from_pretrained(
    model_name,
    quantization_config=bnb_config,
    device_map="auto",
    dtype="auto",
    attn_implementation="flash_attention_2",  # Optional: faster attention
)

tokenizer = AutoTokenizer.from_pretrained(model_name)
tokenizer.pad_token = tokenizer.eos_token
tokenizer.padding_side = "right"

# 3. Prepare for k-bit training (critical step!)
model = prepare_model_for_kbit_training(model)

# 4. LoRA config (see lora skill for parameter details)
lora_config = LoraConfig(
    r=16,
    lora_alpha=32,
    target_modules=["q_proj", "k_proj", "v_proj", "o_proj", "gate_proj", "up_proj", "down_proj"],
    lora_dropout=0.05,
    bias="none",
    task_type="CAUSAL_LM",
)

model = get_peft_model(model, lora_config)
model.print_trainable_parameters()

# 5. Dataset
dataset = load_dataset("tatsu-lab/alpaca", split="train[:1000]")

def format_example(example):
    if example["input"]:
        return {"text": f"### Instruction:\n{example['instruction']}\n\n### Input:\n{example['input']}\n\n### Response:\n{example['output']}"}
    return {"text": f"### Instruction:\n{example['instruction']}\n\n### Response:\n{example['output']}"}

dataset = dataset.map(format_example)

# 6. Training
sft_config = SFTConfig(
    output_dir="./qlora-output",
    max_length=512,
    dataset_text_field="text",
    per_device_train_batch_size=4,
    gradient_accumulation_steps=4,
    num_train_epochs=1,
    learning_rate=2e-4,
    bf16=True,
    logging_steps=10,
    save_steps=100,
    gradient_checkpointing=True,
    gradient_checkpointing_kwargs={"use_reentrant": False},
    optim="paged_adamw_8bit",  # Paged optimizer for memory efficiency
)

trainer = SFTTrainer(
    model=model,
    args=sft_config,
    train_dataset=dataset,
    processing_class=tokenizer,
)

trainer.train()

# 7. Save adapter
model.save_pretrained("./qlora-adapter")
tokenizer.save_pretrained("./qlora-adapter")

Inference and Merging

Inference with Quantized Model

from transformers import AutoModelForCausalLM, AutoTokenizer, BitsAndBytesConfig
from peft import PeftModel
import torch

model_name = "meta-llama/Llama-3.1-8B"

# Load quantized base model
bnb_config = BitsAndBytesConfig(
    load_in_4bit=True,
    bnb_4bit_quant_type="nf4",
    bnb_4bit_compute_dtype=torch.bfloat16,
)

base_model = AutoModelForCausalLM.from_pretrained(
    model_name,
    quantization_config=bnb_config,
    device_map="auto",
    dtype="auto",
)
tokenizer = AutoTokenizer.from_pretrained(model_name)

# Load adapter
model = PeftModel.from_pretrained(base_model, "./qlora-adapter")
model.eval()

# Generate
inputs = tokenizer("### Instruction:\nExplain quantum computing.\n\n### Response:\n", return_tensors="pt").to(model.device)
outputs = model.generate(**inputs, max_new_tokens=256)
print(tokenizer.decode(outputs[0], skip_special_tokens=True))

Merging to Full Precision

To merge QLoRA adapters into a full-precision model (for deployment without bitsandbytes):

from transformers import AutoModelForCausalLM
from peft import PeftModel
import torch

# Load base model in full precision (on CPU to avoid OOM)
base_model = AutoModelForCausalLM.from_pretrained(
    "meta-llama/Llama-3.1-8B",
    dtype=torch.bfloat16,
    device_map="cpu",
)

# Load adapter
model = PeftModel.from_pretrained(base_model, "./qlora-adapter")

# Merge and unload
merged_model = model.merge_and_unload()

# Save merged model
merged_model.save_pretrained("./merged-model")

Note: Merging requires enough RAM to hold the full-precision model. For 70B models, this means ~140GB RAM.

Troubleshooting

CUDA Version Issues

# Check CUDA version
nvcc --version
python -c "import torch; print(torch.version.cuda)"

# bitsandbytes requires CUDA 11.7+
# If version mismatch, reinstall:
pip uninstall bitsandbytes
pip install bitsandbytes --upgrade

"cannot find libcudart" or Missing Library Errors

# Find CUDA installation
find /usr -name "libcudart*" 2>/dev/null

# Set environment variable
export LD_LIBRARY_PATH=/usr/local/cuda/lib64:$LD_LIBRARY_PATH

# Or for conda:
export LD_LIBRARY_PATH=$CONDA_PREFIX/lib:$LD_LIBRARY_PATH

Slow Training

Common cause: compute dtype mismatch

# Check if model is using expected dtype
for name, param in model.named_parameters():
    if param.requires_grad:
        print(f"{name}: {param.dtype}")
        break  # All LoRA params should match

# Ensure bf16 is used in training args if BitsAndBytesConfig uses bf16
# Mismatch causes constant dtype conversions

Out of Memory

# 1. Enable gradient checkpointing
model.gradient_checkpointing_enable()

# 2. Reduce batch size, increase accumulation
per_device_train_batch_size = 1
gradient_accumulation_steps = 16

# 3. Use paged optimizer
optim = "paged_adamw_8bit"

# 4. Reduce sequence length
max_length = 256

# 5. Target fewer modules
target_modules = ["q_proj", "v_proj"]  # Minimal set

Model Loads But Training Fails

# Ensure prepare_model_for_kbit_training is called
from peft import prepare_model_for_kbit_training
model = prepare_model_for_kbit_training(model)  # Don't skip this!

# Enable input gradients if needed
model.enable_input_require_grads()

Best Practices

1. Always use prepare_model_for_kbit_training: This enables gradient computation through the frozen quantized layers

2. Match compute dtype with training precision: If bnb_4bit_compute_dtype=torch.bfloat16, use bf16=True in training args

3. Use paged optimizers for large models: optim="paged_adamw_8bit" or "paged_adamw_32bit" handles memory spikes

4. Start with NF4 + double quantization: This is the recommended default; only change if debugging

5. Gradient checkpointing is essential: Always enable for QLoRA training to fit larger batch sizes

6. Test inference before long training runs: Load the model and generate a few tokens to catch configuration issues early

7. Monitor GPU memory: Use nvidia-smi or torch.cuda.memory_summary() to track actual usage

8. Consider 8-bit for unstable training: If 4-bit training shows instability, try load_in_8bit=True as a middle ground

9. Use current TRL config fields: Put max_length and dataset_text_field in SFTConfig, and pass the tokenizer or processor as processing_class.

References