abaqus-mesh

name	abaqus-mesh
description	Generate finite element meshes. Use when user mentions mesh, elements, nodes, refine mesh, mesh size, or asks about element types like C3D8R, C3D10, S4R.
allowed-tools	["Read","Write","Edit","Glob","Grep","Bash(abaqus:*)"]

Abaqus Mesh Skill

Generate finite element meshes for Abaqus models. Discretizes geometry into elements and nodes for analysis.

When to Use This Skill

Route here when user mentions:

• "Mesh the part", "generate mesh"
• "Element size", "mesh size", "refine mesh"
• "Element type", "C3D8R", "C3D10", "S4R"
• "Too many nodes", "Learning Edition limit"
• "Mesh quality", "check elements"

Route elsewhere:

• Creating or modifying geometry → /abaqus-geometry
• Creating partitions for loads/BCs → /abaqus-geometry
• Extracting mesh-based results → /abaqus-odb

Prerequisites

Before meshing:

1. Geometry must be complete
2. Sections should be assigned (material assignment)

Workflow: Generating a Mesh

Step 1: Understand User's Goal

Ask if unclear:

• Target mesh size? Coarse (fast) or fine (accurate)?
• Hex or tet elements? Simple geometry → hex; complex → tet
• Local refinement? Stress concentrations need finer mesh

Step 2: Choose Element Type

Geometry	Recommended	Code	Notes
Simple box/prism	Hex, reduced	C3D8R	Fast, accurate, try first
Complex freeform	Tet, quadratic	C3D10	Meshes anything
Thin-walled (t/L < 0.1)	Shell	S4R	Plates, shells
Slender beams (L/d > 10)	Beam	B31	Frames, trusses

Decision guidance:

• Can it be hex-meshed? → Try C3D8R first
• Complex shape or holes? → Use C3D10 (tet)
• Thin structure? → Use S4R shell
• Explicit dynamics? → C3D8R works well

Step 3: Choose Mesh Size

Use Case	Element Size	Guideline
Quick feasibility	10-20mm	5+ elements across model
General analysis	3-5mm	10+ elements across smallest dimension
Stress concentrations	1-2mm	5+ elements in high-gradient regions
Topology optimization	2-5mm	3-5 elements across expected members

Rule of thumb: At least 3 elements across any feature you care about.

Step 4: Check Learning Edition Limits

Learning Edition allows max 1000 nodes.

Box Dimensions (mm)	Max Element Size
100 x 100 x 100	20mm
100 x 50 x 30	10mm
50 x 50 x 50	12mm
200 x 100 x 50	25mm

Estimation formula: nodes ≈ (L/size + 1) × (W/size + 1) × (H/size + 1)

Step 5: Apply Local Refinement (If Needed)

Refine mesh near:

• Holes and notches (stress concentrations)
• Fillets and sharp corners
• Load/BC application points

Options:

• Edge seeds with smaller size
• Edge seeds with specific element count
• Biased mesh (graded density)

Step 6: Generate and Verify

After mesh generation, check:

• Node count within limits
• Element count reasonable
• No mesh quality warnings
• Elements exist in all regions

Element Type Reference

3D Solid Elements

Code	Type	Nodes	Use Case
C3D8R	Hex, reduced	8	General purpose (recommended)
C3D8	Hex, full	8	Bending-dominated, no hourglass
C3D20R	Hex, quadratic	20	High accuracy, expensive
C3D4	Tet, linear	4	Complex geometry (less accurate)
C3D10	Tet, quadratic	10	Complex geometry (better accuracy)

Shell Elements

Code	Type	Nodes	Use Case
S4R	Quad, reduced	4	General purpose (recommended)
S4	Quad, full	4	No hourglass
S3	Triangle	3	Complex surfaces

Mesh Quality Guidelines

Metric	Target	Warning	Failure
Aspect ratio	< 5:1	5-10:1	> 10:1
Jacobian	> 0.5	0.1-0.5	< 0.1
Min angle (quad)	> 45°	30-45°	< 30°

Troubleshooting

Problem	Likely Cause	Solution
"Cannot mesh region"	Geometry too complex for hex	Switch to TET with FREE technique
"Element distortion"	Poor element shapes	Refine locally or fix geometry
"Exceeded node limit"	Mesh too fine	Increase element size
"No mesh controls"	Missing mesh technique	Set mesh controls before generating
Mesh won't generate	Gaps in geometry	Check geometry, merge if needed

Code Patterns

For API syntax and code examples, see:

• API Quick Reference
• Common Patterns
• Element Library