okx-cex-trade

name	okx-cex-trade
description	This skill should be used when the user asks to 'buy BTC', 'sell ETH', 'place a limit order', 'place a market order', 'cancel my order', 'amend my order', 'long BTC perp', 'short ETH swap', 'open a position', 'close a position', 'set take profit', 'set stop loss', 'add a trailing stop', 'set leverage', 'check my orders', 'order status', 'fill history', 'trade history', 'buy a call', 'sell a put', 'buy call option', 'sell put option', 'option chain', 'implied volatility', 'IV', 'option Greeks', 'delta', 'gamma', 'theta', 'vega', 'delta hedge', 'option order', 'option position', 'option fills', or any request to place/cancel/amend spot, perpetual swap, delivery futures, or options orders on OKX CEX. Covers spot trading, swap/perpetual contracts, delivery futures, options (calls/puts, Greeks, IV), and conditional (TP/SL/trailing) algo orders. Requires API credentials. Do NOT use for market data (use okx-cex-market), account balance/positions (use okx-cex-portfolio), or grid/DCA bots (use okx-cex-bot).
license	MIT
metadata	{"author":"okx","version":"1.0.0","homepage":"https://www.okx.com","agent":{"requires":{"bins":"[Truncated]"},"install":["[Truncated]"]}}

OKX CEX Trading CLI

Spot, perpetual swap, delivery futures, and options order management on OKX exchange. Place, cancel, amend, and monitor orders; query option chains and Greeks; set take-profit/stop-loss and trailing stops; manage leverage and positions. Requires API credentials.

Prerequisites

1. Install okx CLI:

   npm install -g @okx_ai/okx-trade-cli
   

2. Configure credentials:

   okx config init
   

   Or set environment variables:

   export OKX_API_KEY=your_key
   export OKX_SECRET_KEY=your_secret
   export OKX_PASSPHRASE=your_passphrase
   

3. Test with demo mode (simulated trading, no real funds):

   okx --profile demo spot orders
   

Credential & Profile Check

Run this check before any authenticated command.

Step A — Verify credentials

okx config show       # verify configuration status (output is masked)

• If the command returns an error or shows no configuration: stop all operations, guide the user to run okx config init, and wait for setup to complete before retrying.
• If credentials are configured: proceed to Step B.

Step B — Confirm profile (required)

--profile is required for all authenticated commands. Never add a profile implicitly.

Value	Mode	Funds
live	实盘	Real funds
demo	模拟盘	Simulated funds

Resolution rules:

1. Current message intent is clear (e.g. "real" / "实盘" / "live" → live; "test" / "模拟" / "demo" → demo) → use it and inform the user: "Using --profile live (实盘)" or "Using --profile demo (模拟盘)"
2. Current message has no explicit declaration → check conversation context for a previous profile:
   • Found → use it, inform user: "Continuing with --profile live (实盘) from earlier"
   • Not found → ask: "Live (实盘) or Demo (模拟盘)?" — wait for answer before proceeding

Handling 401 Authentication Errors

If any command returns a 401 / authentication error:

1. Stop immediately — do not retry the same command
2. Inform the user: "Authentication failed (401). Your API credentials may be invalid or expired."
3. Guide the user to update credentials by editing the file directly with their local editor:

   ~/.okx/config.toml
   

   Update the fields api_key, secret_key, passphrase under the relevant profile. Do NOT paste the new credentials into chat.
4. After the user confirms the file is updated, run okx config show to verify (output is masked)
5. Only then retry the original operation

Demo vs Live Mode

Profile is the single control for 实盘/模拟盘 switching — exactly two options:

--profile	Mode	Funds
live	实盘	Real money — irreversible
demo	模拟盘	Simulated — no real funds

okx --profile live  spot place ...    # 实盘 — real funds
okx --profile demo  spot place ...    # 模拟盘 — simulated funds

Rules:

1. --profile is required on every authenticated command — determined in "Credential & Profile Check" Step B
2. Every response after a command must append: [profile: live] or [profile: demo]
3. Do not use the --demo flag for mode switching — use --profile instead

Example

User: "Buy 0.01 BTC"
Agent: "Live (实盘) or Demo (模拟盘)?"
User: "Demo"
Agent runs: okx --profile demo spot place --instId BTC-USDT --side buy --ordType market --sz 0.01
Agent replies: "Order placed: 7890123456 (OK) — simulated, no real funds used. [profile: demo]"

Skill Routing

• For market data (prices, charts, depth, funding rates) → use okx-cex-market
• For account balance, P&L, positions, fees, transfers → use okx-cex-portfolio
• For regular spot/swap/futures/options/algo orders → use okx-cex-trade (this skill)
• For grid and DCA trading bots → use okx-cex-bot

Sz Conversion Rules for Derivatives

Applies to all swap, futures, and option orders. --sz always means number of contracts, never a currency amount. Follow this flow before every derivative place order.

Step 1 — Identify contract type from instId

instId pattern	Contract type	Settlement	ctVal unit
*-USDT-SWAP	Linear perpetual swap	USDT	Base currency (BTC/ETH/…)
*-USDT-YYMMDD	Linear delivery futures	USDT	Base currency
*-USD-SWAP	Inverse perpetual swap	Base coin	USD (fixed, e.g. 100 USD)
*-USD-YYMMDD	Inverse delivery futures	Base coin	USD (fixed, e.g. 100 USD)
*-USD-YYMMDD-strike-C/P	Inverse option	Base coin	Base currency (e.g. 0.1 BTC)

Step 2 — Determine user's sz intent

User mentions a quantity:

1. Includes currency unit (USDT / USD / $ / ¥ / 元)
   → User is specifying a quote-currency amount → must convert to contracts (see Step 3)

2. Explicitly says "X contracts" / "X 张" / "X 手"
   → Use directly as sz, no conversion needed

3. Plain number with no unit (for swap/futures/option orders)
   → Ambiguous — ask before proceeding:
     "您输入的 X 是合约张数还是 USDT 金额？"
     (Is X the number of contracts or a USDT amount?)
     Wait for the user's answer before continuing.

Step 3 — Apply the correct conversion formula

Before running any formula, fetch the required data:

# Get ctVal, minSz, lotSz for the instrument
okx market instruments --instType <SWAP|FUTURES|OPTION> --instId <instId> --json

# Get current mark price (for linear contracts and options)
okx market mark-price --instType <SWAP|FUTURES|OPTION> --instId <instId> --json

A. Linear contracts (*-USDT-SWAP / *-USDT-YYMMDD)

ctVal unit: base currency (e.g. ETH)
markPx unit: USDT

Formula:  sz = floor(usdtAmt / (markPx × ctVal))

Example — ETH-USDT-SWAP (ctVal=0.1 ETH, markPx=2000 USDT):
  200 USDT → floor(200 / (2000 × 0.1)) = floor(1.0) = 1 contract  ✓
   50 USDT → floor(50  / (2000 × 0.1)) = floor(0.25) = 0          ✗ insufficient

B. Inverse contracts (*-USD-SWAP / *-USD-YYMMDD)

ctVal unit: USD (fixed face value, e.g. 100 USD per contract)
markPx is NOT needed for sz calculation

Formula:  sz = floor(usdtAmt / ctVal)   (1 USDT ≈ 1 USD)

Example — BTC-USD-SWAP (ctVal=100 USD):
  500 USDT → floor(500 / 100) = 5 contracts  ✓

⚠ Settlement warning (always show):
  "This is an inverse contract. Margin and P&L are settled in BTC, not USDT.
   Your USDT must be converted to BTC to meet margin requirements."

C. Inverse options (*-USD-YYMMDD-strike-C/P)

markPx unit: base currency (e.g. BTC per contract)
ctVal unit: base currency (e.g. 0.1 BTC)
Need BTC spot price to convert USDT → contracts

Required data:
  okx option greeks --uly <BTC-USD> --expTime <YYMMDD> --json  → markPx (BTC)
  okx market ticker BTC-USDT --json                            → last price (btcPx)

Formula (buyer cost):
  sz = floor(usdtAmt / (markPx_BTC × btcPx × ctVal))

Example — BTC-USD-250328-95000-C (markPx=0.005 BTC, btcPx=95000, ctVal=0.1 BTC):
  200 USDT → floor(200 / (0.005 × 95000 × 0.1))
           = floor(200 / 47.5) = floor(4.21) = 4 contracts
  Total premium ≈ 4 × 0.005 × 0.1 = 0.002 BTC ≈ 190 USDT

⚠ Always show both BTC and USDT premium cost to the buyer.
⚠ Seller margin is also in BTC — remind user of liquidation risk.

Step 4 — Validate and confirm before placing

After computing sz:

1. sz == 0 or sz < minSz
   → Reject. Inform user:
     "Amount too small: minimum order is {minSz} contract(s),
      equivalent to ~{minSz × markPx × ctVal} USDT."

2. sz not a multiple of lotSz
   → Round down to the nearest valid multiple:
     sz = floor(sz / lotSz) × lotSz

3. sz ≥ minSz
   → Show conversion summary and wait for user confirmation before placing:

     Conversion summary:
       Input:    {usdtAmt} USDT
       markPx:   {markPx}  |  ctVal: {ctVal}
       Raw:      {usdtAmt} / ({markPx} × {ctVal}) = {rawResult}
       Rounded:  {sz} contracts  (~{sz × markPx × ctVal} USDT actual value)
     Confirm order with sz={sz}?

Quickstart

# Market buy 0.01 BTC (spot)
okx spot place --instId BTC-USDT --side buy --ordType market --sz 0.01

# Limit sell 0.01 BTC at $100,000 (spot)
okx spot place --instId BTC-USDT --side sell --ordType limit --sz 0.01 --px 100000

# Long 1 contract BTC perp (cross margin)
okx swap place --instId BTC-USDT-SWAP --side buy --ordType market --sz 1 \
  --tdMode cross --posSide long

# Long 1 contract with attached TP/SL (one step)
okx swap place --instId BTC-USDT-SWAP --side buy --ordType market --sz 1 \
  --tdMode cross --posSide long \
  --tpTriggerPx 105000 --tpOrdPx -1 --slTriggerPx 88000 --slOrdPx -1

# Close BTC perp long position entirely at market
okx swap close --instId BTC-USDT-SWAP --mgnMode cross --posSide long

# Set 10x leverage on BTC perp (cross)
okx swap leverage --instId BTC-USDT-SWAP --lever 10 --mgnMode cross

# --- Stock Token (TSLA, NVDA, etc.) ---
# Step 1: set leverage ≤ 5x (stock tokens max leverage is 5x)
okx swap leverage --instId TSLA-USDT-SWAP --lever 5 --mgnMode cross

# Step 2: open long on TSLA (--posSide required for stock tokens)
okx swap place --instId TSLA-USDT-SWAP --side buy --ordType market --sz 1 \
  --tdMode cross --posSide long

# Open short on NVDA
okx swap leverage --instId NVDA-USDT-SWAP --lever 3 --mgnMode cross
okx swap place --instId NVDA-USDT-SWAP --side sell --ordType market --sz 1 \
  --tdMode cross --posSide short

# Close TSLA long entirely at market
okx swap close --instId TSLA-USDT-SWAP --mgnMode cross --posSide long

# Set TP/SL on a spot BTC position (sell when price hits $105k, SL at $88k)
okx spot algo place --instId BTC-USDT --side sell --ordType oco --sz 0.01 \
  --tpTriggerPx 105000 --tpOrdPx -1 \
  --slTriggerPx 88000 --slOrdPx -1

# Place trailing stop on BTC perp long (callback 2%)
okx swap algo trail --instId BTC-USDT-SWAP --side sell --sz 1 \
  --tdMode cross --posSide long --callbackRatio 0.02

# Place trailing stop on spot BTC position (callback 2%)
okx spot algo trail --instId BTC-USDT --side sell --sz 0.01 --callbackRatio 0.02

# View open spot orders
okx spot orders

# View open swap positions
okx swap positions

# Cancel a spot order
okx spot cancel --instId BTC-USDT --ordId <ordId>

Command Index

Spot Orders

#	Command	Type	Description
1	okx spot place	WRITE	Place spot order (market/limit/post_only/fok/ioc)
2	okx spot cancel	WRITE	Cancel spot order
3	okx spot amend	WRITE	Amend spot order price or size
4	okx spot algo place	WRITE	Place spot TP/SL algo order
5	okx spot algo amend	WRITE	Amend spot TP/SL levels
6	okx spot algo cancel	WRITE	Cancel spot algo order
7	okx spot algo trail	WRITE	Place spot trailing stop order
8	okx spot orders	READ	List open or historical spot orders
9	okx spot get	READ	Single spot order details
10	okx spot fills	READ	Spot trade fill history
11	okx spot algo orders	READ	List spot TP/SL algo orders

Swap / Perpetual Orders

#	Command	Type	Description
12	okx swap place	WRITE	Place perpetual swap order
13	okx swap cancel	WRITE	Cancel swap order
14	okx swap amend	WRITE	Amend swap order price or size
15	okx swap close	WRITE	Close entire position at market
16	okx swap leverage	WRITE	Set leverage for an instrument
17	okx swap algo place	WRITE	Place swap TP/SL algo order
18	okx swap algo trail	WRITE	Place swap trailing stop order
19	okx swap algo amend	WRITE	Amend swap algo order
20	okx swap algo cancel	WRITE	Cancel swap algo order
21	okx swap positions	READ	Open perpetual swap positions
22	okx swap orders	READ	List open or historical swap orders
23	okx swap get	READ	Single swap order details
24	okx swap fills	READ	Swap trade fill history
25	okx swap get-leverage	READ	Current leverage settings
26	okx swap algo orders	READ	List swap algo orders

Futures / Delivery Orders

#	Command	Type	Description
27	okx futures place	WRITE	Place delivery futures order
28	okx futures cancel	WRITE	Cancel delivery futures order
29	okx futures amend	WRITE	Amend delivery futures order price or size
30	okx futures close	WRITE	Close entire futures position at market
31	okx futures leverage	WRITE	Set leverage for a futures instrument
32	okx futures algo place	WRITE	Place futures TP/SL algo order
33	okx futures algo trail	WRITE	Place futures trailing stop order
34	okx futures algo amend	WRITE	Amend futures algo order
35	okx futures algo cancel	WRITE	Cancel futures algo order
36	okx futures orders	READ	List delivery futures orders
37	okx futures positions	READ	Open delivery futures positions
38	okx futures fills	READ	Delivery futures fill history
39	okx futures get	READ	Single delivery futures order details
40	okx futures get-leverage	READ	Current futures leverage settings
41	okx futures algo orders	READ	List futures algo orders

Options Orders

#	Command	Type	Description
42	okx option instruments	READ	Option chain: list available contracts for an underlying
43	okx option greeks	READ	Implied volatility + Greeks (delta/gamma/theta/vega) by underlying
44	okx option place	WRITE	Place option order (call or put, buyer or seller)
45	okx option cancel	WRITE	Cancel unfilled option order
46	okx option amend	WRITE	Amend option order price or size
47	okx option batch-cancel	WRITE	Batch cancel up to 20 option orders
48	okx option orders	READ	List option orders (live / history / archive)
49	okx option get	READ	Single option order details
50	okx option positions	READ	Open option positions with live Greeks
51	okx option fills	READ	Option trade fill history

Cross-Skill Workflows

Spot market buy

User: "Buy $500 worth of ETH at market"

1. okx-cex-market    okx market ticker ETH-USDT             → get current price to estimate sz
2. okx-cex-portfolio okx account balance USDT               → confirm available funds ≥ $500
        ↓ user approves
3. okx-cex-trade     okx spot place --instId ETH-USDT --side buy --ordType market --sz <sz>
4. okx-cex-trade     okx spot fills --instId ETH-USDT        → confirm fill price and size

Open long BTC perp with TP/SL

User: "Long 5 contracts BTC perp at market, TP at $105k, SL at $88k"

1. okx-cex-portfolio okx account balance USDT               → confirm margin available
2. okx-cex-portfolio okx account max-size --instId BTC-USDT-SWAP --tdMode cross → confirm size ok
        ↓ user approves
3. okx-cex-trade     okx swap place --instId BTC-USDT-SWAP --side buy \
                       --ordType market --sz 5 --tdMode cross --posSide long \
                       --tpTriggerPx 105000 --tpOrdPx -1 \
                       --slTriggerPx 88000 --slOrdPx -1
4. okx-cex-trade     okx swap positions                     → confirm position opened

Note: TP/SL is attached directly to the order via --tpTriggerPx/--slTriggerPx — no separate swap algo place step needed. Use swap algo place only when adding TP/SL to an existing position.

Adjust leverage then place order

User: "Set BTC perp to 5x leverage then go long 10 contracts"

1. okx-cex-trade     okx swap get-leverage --instId BTC-USDT-SWAP --mgnMode cross → check current lever
        ↓ user approves change
2. okx-cex-trade     okx swap leverage --instId BTC-USDT-SWAP --lever 5 --mgnMode cross
3. okx-cex-trade     okx swap place --instId BTC-USDT-SWAP --side buy \
                       --ordType market --sz 10 --tdMode cross --posSide long
4. okx-cex-trade     okx swap positions                     → confirm position + leverage

Place trailing stop on open position

User: "Set a 3% trailing stop on my open position"

Spot example (no margin mode needed):

1. okx-cex-portfolio okx account balance BTC               → confirm spot BTC holdings
2. okx-cex-market    okx market ticker BTC-USDT            → current price reference
        ↓ user approves
3. okx-cex-trade     okx spot algo trail --instId BTC-USDT --side sell \
                       --sz <spot_sz> --callbackRatio 0.03
4. okx-cex-trade     okx spot algo orders --instId BTC-USDT → confirm trail order placed

Swap/Perpetual example:

1. okx-cex-trade     okx swap positions                     → confirm size of open long
2. okx-cex-market    okx market ticker BTC-USDT-SWAP        → current price reference
        ↓ user approves
3. okx-cex-trade     okx swap algo trail --instId BTC-USDT-SWAP --side sell \
                       --sz <pos_size> --tdMode cross --posSide long --callbackRatio 0.03
4. okx-cex-trade     okx swap algo orders --instId BTC-USDT-SWAP → confirm trail order placed

Futures/Delivery example:

1. okx-cex-trade     okx futures positions                  → confirm size of open long
2. okx-cex-market    okx market ticker BTC-USDT-<YYMMDD>      → current price reference
        ↓ user approves
3. okx-cex-trade     okx futures algo trail --instId BTC-USDT-<YYMMDD> --side sell \
                       --sz <pos_size> --tdMode cross --posSide long --callbackRatio 0.03
4. okx-cex-trade     okx futures algo orders --instId BTC-USDT-<YYMMDD> → confirm trail order placed

Trade a stock token (TSLA / NVDA / AAPL)

User: "I want to long TSLA with 500 USDT"

1. okx-cex-market   okx market stock-tokens              → confirm TSLA-USDT-SWAP is available
2. okx-cex-market   okx market ticker TSLA-USDT-SWAP     → current price (e.g., markPx=310 USDT)
3. okx-cex-market   okx market instruments --instType SWAP --instId TSLA-USDT-SWAP --json
                    → ctVal=1, minSz=1, lotSz=1
   Agent computes:  sz = floor(500 / (310 × 1)) = 1 contract (~310 USDT)
   Agent shows conversion summary and asks to confirm

        ↓ user confirms

4. okx-cex-portfolio okx account balance USDT            → confirm margin available
5. okx-cex-trade    okx swap get-leverage --instId TSLA-USDT-SWAP --mgnMode cross
                    → check current leverage; must be ≤ 5x
   (if not set or > 5x) okx swap leverage --instId TSLA-USDT-SWAP --lever 5 --mgnMode cross
6. okx-cex-trade    okx swap place --instId TSLA-USDT-SWAP --side buy --ordType market \
                      --sz 1 --tdMode cross --posSide long
7. okx-cex-trade    okx swap positions TSLA-USDT-SWAP    → confirm position opened

⚠ Stock token constraints: max leverage 5x (exchange rejects > 5x). --posSide is required. Trading follows stock market hours — confirm live ticker before placing.

---

Open linear swap by USDT amount

User: "用 200 USDT 做多 ETH 永续 (cross margin)"

1. okx-cex-market  okx market instruments --instType SWAP --instId ETH-USDT-SWAP --json
                   → ctVal=0.1 ETH, minSz=1, lotSz=1

2. okx-cex-market  okx market mark-price --instType SWAP --instId ETH-USDT-SWAP --json
                   → markPx=2000 USDT

3. Agent computes:  sz = floor(200 / (2000 × 0.1)) = 1 contract (~200 USDT)
   Agent informs user of conversion summary and asks to confirm

        ↓ user confirms

4. okx-cex-trade   okx swap place --instId ETH-USDT-SWAP --side buy --ordType market \
                     --sz 1 --tdMode cross --profile <live|demo>

5. okx-cex-trade   okx swap positions ETH-USDT-SWAP    → confirm position opened

Open inverse swap by USDT amount

User: "用 500 USDT 开一个 BTC 币本位永续多单"

1. okx-cex-market  okx market instruments --instType SWAP --instId BTC-USD-SWAP --json
                   → ctVal=100 USD, minSz=1

2. Agent computes:  sz = floor(500 / 100) = 5 contracts
   Agent warns:    "BTC-USD-SWAP 是币本位合约，保证金和盈亏以 BTC 结算，非 USDT。
                    请确认账户有足够 BTC 作为保证金。"
   Agent shows conversion summary and asks to confirm

        ↓ user confirms

3. okx-cex-trade   okx swap place --instId BTC-USD-SWAP --side buy --ordType market \
                     --sz 5 --tdMode cross --profile <live|demo>

4. okx-cex-trade   okx swap positions BTC-USD-SWAP    → confirm position opened

Cancel all open spot orders

User: "Cancel all my open BTC spot orders"

1. okx-cex-trade     okx spot orders                        → list open orders
2. okx-cex-trade     (for each ordId) okx spot cancel --instId BTC-USDT --ordId <id>
3. okx-cex-trade     okx spot orders                        → confirm all cancelled

Buy a BTC call option

User: "Buy 2 BTC call options at strike 95000 expiring end of March"

1. okx-cex-trade     okx option instruments --uly BTC-USD --expTime 250328
                     → find exact instId (e.g. BTC-USD-250328-95000-C)
2. okx-cex-trade     okx option greeks --uly BTC-USD --expTime 250328
                     → check IV, delta, and markPx to assess fair value
3. okx-cex-portfolio okx account balance                    → confirm enough USDT/BTC for premium
        ↓ user approves
4. okx-cex-trade     okx option place --instId BTC-USD-250328-95000-C \
                       --side buy --ordType limit --tdMode cash --sz 2 --px 0.005
5. okx-cex-trade     okx option orders                      → confirm order is live

Check option portfolio Greeks

User: "What's my total delta exposure from options?"

1. okx-cex-trade     okx option positions                   → live positions with per-contract Greeks
2. okx-cex-market    okx market ticker BTC-USD              → current spot price for context

Operation Flow

Step 0 — Credential & Profile Check

Before any authenticated command:

Determine profile (required):

• Options: live (实盘) or demo (模拟盘) — exactly these two values

1. Current message intent clear (e.g. "real"/"实盘"/"live" → live; "test"/"模拟"/"demo" → demo) → use it, inform user: "Using --profile live (实盘)"
2. Current message has no explicit declaration → check conversation context for previous profile:
   • Found → use it, inform user: "Continuing with --profile live (实盘) from earlier"
   • Not found → ask: "Live (实盘) or Demo (模拟盘)?" — wait for answer

If no credentials configured: guide user to run okx config init, stop all trading actions

After every command result: append [profile: live] or [profile: demo] to the response

Step 1: Identify instrument type and action

Spot (instId format: BTC-USDT):

• Place/cancel/amend order → okx spot place/cancel/amend
• TP/SL conditional → okx spot algo place/amend/cancel
• Trailing stop → okx spot algo trail
• Query → okx spot orders/get/fills/algo orders

Swap/Perpetual (instId format: BTC-USDT-SWAP):

• Place/cancel/amend order → okx swap place/cancel/amend
• Close position → okx swap close
• Leverage → okx swap leverage / okx swap get-leverage
• TP/SL conditional → okx swap algo place/amend/cancel
• Trailing stop → okx swap algo trail
• Query → okx swap positions/orders/get/fills/get-leverage/algo orders

Futures/Delivery (instId format: BTC-USDT-<YYMMDD>):

• Place/cancel/amend order → okx futures place/cancel/amend
• Close position → okx futures close
• Leverage → okx futures leverage / okx futures get-leverage
• TP/SL conditional → okx futures algo place/amend/cancel
• Trailing stop → okx futures algo trail
• Query → okx futures orders/positions/fills/get/get-leverage/algo orders

Options (instId format: BTC-USD-250328-95000-C or ...-P):

• Step 1 (required): find valid instId → okx option instruments --uly BTC-USD
• Step 2 (recommended): check IV and Greeks → okx option greeks --uly BTC-USD
• Place/cancel/amend order → okx option place/cancel/amend
• Batch cancel → okx option batch-cancel --orders '[...]'
• Query → okx option orders/get/positions/fills
• tdMode: cash for buyers (full premium upfront, no liquidation risk); cross or isolated for sellers (margin required)

Step 2: Confirm profile (determined in Step 0), then confirm write parameters

Read commands (orders, positions, fills, get, get-leverage, algo orders): run immediately; note the profile used.

• --history flag: defaults to active/open; use --history only if user explicitly asks for history
• --ordType for algo: conditional = single TP or SL; oco = both TP and SL together
• --tdMode for swap/futures: cross or isolated; spot always uses cash (set automatically)
• --posSide for hedge mode: long or short; omit in net mode

Write commands (place, cancel, amend, close, leverage, algo): two confirmations required:

1. Profile — determined in Step 0; use --profile live (实盘) or --profile demo (模拟盘)
2. Confirm parameters — confirm the key order details once before executing:
   • Spot place: confirm --instId, --side, --ordType, --sz; price (--px) required for limit orders; optionally attach TP/SL with --tpTriggerPx/--slTriggerPx
   • Swap/Futures/Option place: before confirming --sz, apply "Sz Conversion Rules for Derivatives" — if the user's input was a USDT amount, resolve it to contracts first, show the conversion summary, and use the computed sz in the confirmation; confirm --instId, --side, --sz, --tdMode; confirm --posSide if in hedge mode; optionally attach TP/SL with --tpTriggerPx/--slTriggerPx
   • Swap close: confirm --instId, --mgnMode, --posSide; closes the entire position at market
   • Swap leverage: confirm new leverage and impact on existing positions; cannot exceed exchange max
   • Futures close: confirm --instId, --mgnMode, --posSide; closes the entire position at market
   • Futures leverage: confirm new leverage and impact on existing positions; cannot exceed exchange max
   • Algo place (TP/SL): confirm trigger prices; use --tpOrdPx -1 for market execution at trigger
   • Algo trail (spot/swap/futures): confirm --callbackRatio (e.g., 0.02 = 2%) or --callbackSpread (fixed price spread); spot does not require --tdMode or --posSide

Step 3: Verify after writes

• After spot place: run okx spot orders to confirm order is live or okx spot fills if market order
• After swap place: run okx swap orders or okx swap positions to confirm
• After swap close: run okx swap positions to confirm position size is 0
• After futures place: run okx futures orders or okx futures positions to confirm
• After futures close: run okx futures positions to confirm position size is 0
• After spot algo place/trail: run okx spot algo orders to confirm algo is active
• After swap algo place/trail: run okx swap algo orders to confirm algo is active
• After futures algo place/trail: run okx futures algo orders to confirm algo is active
• After cancel: run okx spot orders / okx swap orders / okx futures orders to confirm order is gone

CLI Command Reference

Order Type Reference

--ordType	Description	Requires --px
market	Fill immediately at best price	No
limit	Fill at specified price or better	Yes
post_only	Limit order; cancelled if it would be a taker	Yes
fok	Fill entire order immediately or cancel	Yes
ioc	Fill what's available immediately, cancel rest	Yes
conditional	Algo: single TP or SL trigger	No (set trigger px)
oco	Algo: TP + SL together (one cancels other)	No (set both trigger px)
move_order_stop	Trailing stop (spot/swap/futures)	No (set callback)

---

Spot — Place Order

okx spot place --instId <id> --side <buy|sell> --ordType <type> --sz <n> \
  [--px <price>] \
  [--tpTriggerPx <p>] [--tpOrdPx <p|-1>] \
  [--slTriggerPx <p>] [--slOrdPx <p|-1>] \
  [--json]

Param	Required	Default	Description
--instId	Yes	-	Spot instrument (e.g., BTC-USDT)
--side	Yes	-	buy or sell
--ordType	Yes	-	market, limit, post_only, fok, ioc
--sz	Yes	-	Order size in base currency (e.g., BTC amount)
--px	Cond.	-	Price — required for limit, post_only, fok, ioc
--tpTriggerPx	No	-	Attached take-profit trigger price
--tpOrdPx	No	-	TP order price; use -1 for market execution
--slTriggerPx	No	-	Attached stop-loss trigger price
--slOrdPx	No	-	SL order price; use -1 for market execution

---

Spot — Cancel Order

okx spot cancel --instId <id> --ordId <id> [--json]

---

Spot — Amend Order

okx spot amend --instId <id> [--ordId <id>] [--clOrdId <id>] \
  [--newSz <n>] [--newPx <p>] [--json]

Must provide at least one of --newSz or --newPx.

---

Spot — Place Algo (TP/SL / Trail)

okx spot algo place --instId <id> --side <buy|sell> \
  --ordType <oco|conditional|move_order_stop> --sz <n> \
  [--tpTriggerPx <p>] [--tpOrdPx <p|-1>] \
  [--slTriggerPx <p>] [--slOrdPx <p|-1>] \
  [--callbackRatio <r>] [--callbackSpread <s>] [--activePx <p>] \
  [--json]

Param	Required	Default	Description
--instId	Yes	-	Spot instrument (e.g., BTC-USDT)
--side	Yes	-	buy or sell
--ordType	Yes	-	oco, conditional, or move_order_stop
--sz	Yes	-	Order size in base currency
--tpTriggerPx	Cond.	-	Take-profit trigger price
--tpOrdPx	Cond.	-	TP order price; use -1 for market execution
--slTriggerPx	Cond.	-	Stop-loss trigger price
--slOrdPx	Cond.	-	SL order price; use -1 for market execution
--callbackRatio	Cond.	-	Trailing callback as a ratio (e.g., 0.02 = 2%); cannot be combined with --callbackSpread
--callbackSpread	Cond.	-	Trailing callback as fixed price distance; cannot be combined with --callbackRatio
--activePx	No	-	Price at which trailing stop becomes active

For oco: provide both TP and SL params. For conditional: provide only TP or only SL. For move_order_stop: provide --callbackRatio or --callbackSpread (one required).

---

Spot — Amend Algo

okx spot algo amend --instId <id> --algoId <id> \
  [--newSz <n>] [--newTpTriggerPx <p>] [--newTpOrdPx <p>] \
  [--newSlTriggerPx <p>] [--newSlOrdPx <p>] [--json]

---

Spot — Cancel Algo

okx spot algo cancel --instId <id> --algoId <id> [--json]

---

Spot — Place Trailing Stop

okx spot algo trail --instId <id> --side <buy|sell> --sz <n> \
  [--callbackRatio <ratio>] [--callbackSpread <spread>] \
  [--activePx <price>] \
  [--json]

Param	Required	Default	Description
--instId	Yes	-	Spot instrument (e.g., BTC-USDT)
--side	Yes	-	buy or sell — use sell to protect a long spot position
--sz	Yes	-	Order size in base currency
--callbackRatio	Cond.	-	Trailing callback as a ratio (e.g., 0.02 = 2%); cannot be combined with --callbackSpread
--callbackSpread	Cond.	-	Trailing callback as fixed price distance; cannot be combined with --callbackRatio
--activePx	No	-	Price at which trailing stop becomes active

Spot trailing stop does not require --tdMode or --posSide (spot has no margin mode or position side concept).

---

Spot — List Orders

okx spot orders [--instId <id>] [--history] [--json]

Flag	Effect
(default)	Open/pending orders
--history	Historical (filled, cancelled) orders

---

Spot — Get Order

okx spot get --instId <id> [--ordId <id>] [--clOrdId <id>] [--json]

Returns: ordId, instId, side, ordType, px, sz, fillSz, avgPx, state, cTime.

---

Spot — Fills

okx spot fills [--instId <id>] [--ordId <id>] [--json]

Returns: instId, side, fillPx, fillSz, fee, ts.

---

Spot — Algo Orders

okx spot algo orders [--instId <id>] [--history] [--ordType <type>] [--json]

Returns: algoId, instId, type, side, sz, tpTrigger, slTrigger, state.

---

Swap — Place Order

okx swap place --instId <id> --side <buy|sell> --ordType <type> --sz <n> \
  --tdMode <cross|isolated> \
  [--posSide <long|short>] [--px <price>] \
  [--tpTriggerPx <p>] [--tpOrdPx <p|-1>] \
  [--slTriggerPx <p>] [--slOrdPx <p|-1>] \
  [--json]

Param	Required	Default	Description
--instId	Yes	-	Swap instrument (e.g., BTC-USDT-SWAP)
--side	Yes	-	buy or sell
--ordType	Yes	-	market, limit, post_only, fok, ioc
--sz	Yes	-	Number of contracts
--tdMode	Yes	-	cross or isolated
--posSide	Cond.	-	long or short — required in hedge mode
--px	Cond.	-	Price — required for limit orders
--tpTriggerPx	No	-	Attached take-profit trigger price
--tpOrdPx	No	-	TP order price; use -1 for market execution
--slTriggerPx	No	-	Attached stop-loss trigger price
--slOrdPx	No	-	SL order price; use -1 for market execution

---

Swap — Cancel Order

okx swap cancel --instId <id> --ordId <id> [--json]

---

Swap — Amend Order

okx swap amend --instId <id> [--ordId <id>] [--clOrdId <id>] \
  [--newSz <n>] [--newPx <p>] [--json]

---

Swap — Close Position

okx swap close --instId <id> --mgnMode <cross|isolated> \
  [--posSide <long|short>] [--autoCxl] [--json]

Param	Required	Default	Description
--instId	Yes	-	Swap instrument
--mgnMode	Yes	-	cross or isolated
--posSide	Cond.	-	long or short — required in hedge mode
--autoCxl	No	false	Auto-cancel pending orders before closing

Closes the entire position at market price.

---

Swap — Set Leverage

okx swap leverage --instId <id> --lever <n> --mgnMode <cross|isolated> \
  [--posSide <long|short>] [--json]

Param	Required	Default	Description
--instId	Yes	-	Swap instrument
--lever	Yes	-	Leverage multiplier (e.g., 10)
--mgnMode	Yes	-	cross or isolated
--posSide	Cond.	-	long or short — required for isolated mode in hedge mode

⚠ Stock tokens (e.g., TSLA-USDT-SWAP): maximum leverage is 5x. The exchange will reject --lever values above 5 for stock token instruments.

---

Swap — Get Leverage

okx swap get-leverage --instId <id> --mgnMode <cross|isolated> [--json]

Returns table: instId, mgnMode, posSide, lever.

---

Swap — Place Algo (TP/SL / Trail)

okx swap algo place --instId <id> --side <buy|sell> \
  --ordType <oco|conditional|move_order_stop> --sz <n> \
  --tdMode <cross|isolated> \
  [--posSide <long|short>] [--reduceOnly] \
  [--tpTriggerPx <p>] [--tpOrdPx <p|-1>] \
  [--slTriggerPx <p>] [--slOrdPx <p|-1>] \
  [--callbackRatio <r>] [--callbackSpread <s>] [--activePx <p>] \
  [--json]

Param	Required	Default	Description
--instId	Yes	-	Swap instrument (e.g., BTC-USDT-SWAP)
--side	Yes	-	buy or sell
--ordType	Yes	-	oco, conditional, or move_order_stop
--sz	Yes	-	Number of contracts
--tdMode	Yes	-	cross or isolated
--posSide	Cond.	-	long or short — required in hedge mode
--reduceOnly	No	false	Close-only; will not open a new position if one doesn't exist
--tpTriggerPx	Cond.	-	Take-profit trigger price
--tpOrdPx	Cond.	-	TP order price; use -1 for market execution
--slTriggerPx	Cond.	-	Stop-loss trigger price
--slOrdPx	Cond.	-	SL order price; use -1 for market execution
--callbackRatio	Cond.	-	Trailing callback as a ratio (e.g., 0.02 = 2%); cannot be combined with --callbackSpread
--callbackSpread	Cond.	-	Trailing callback as fixed price distance; cannot be combined with --callbackRatio
--activePx	No	-	Price at which trailing stop becomes active

For move_order_stop: provide --callbackRatio or --callbackSpread (one required).

---

Swap — Place Trailing Stop

okx swap algo trail --instId <id> --side <buy|sell> --sz <n> \
  --tdMode <cross|isolated> \
  [--posSide <long|short>] [--reduceOnly] \
  [--callbackRatio <ratio>] [--callbackSpread <spread>] \
  [--activePx <price>] \
  [--json]

Param	Required	Default	Description
--callbackRatio	Cond.	-	Trailing callback as a ratio (e.g., 0.02 = 2%); cannot be combined with --callbackSpread
--callbackSpread	Cond.	-	Trailing callback as fixed price distance; cannot be combined with --callbackRatio
--activePx	No	-	Price at which trailing stop becomes active

---

Swap — Amend Algo

okx swap algo amend --instId <id> --algoId <id> \
  [--newSz <n>] [--newTpTriggerPx <p>] [--newTpOrdPx <p>] \
  [--newSlTriggerPx <p>] [--newSlOrdPx <p>] [--json]

---

Swap — Cancel Algo

okx swap algo cancel --instId <id> --algoId <id> [--json]

---

Swap — List Orders

okx swap orders [--instId <id>] [--history] [--json]

---

Swap — Get Order

okx swap get --instId <id> [--ordId <id>] [--clOrdId <id>] [--json]

Returns: ordId, instId, side, posSide, ordType, px, sz, fillSz, avgPx, state, cTime.

---

Swap — Positions

okx swap positions [<instId>] [--json]

Returns: instId, side, size, avgPx, upl, uplRatio, lever. Only non-zero positions.

---

Swap — Fills

okx swap fills [--instId <id>] [--ordId <id>] [--archive] [--json]

--archive: access older fills beyond the default window.

---

Swap — Algo Orders

okx swap algo orders [--instId <id>] [--history] [--ordType <type>] [--json]

---

Futures — Place Order

okx futures place --instId <id> --side <buy|sell> --ordType <type> --sz <n> \
  --tdMode <cross|isolated> \
  [--posSide <long|short>] [--px <price>] [--reduceOnly] \
  [--tpTriggerPx <p>] [--tpOrdPx <p|-1>] \
  [--slTriggerPx <p>] [--slOrdPx <p|-1>] \
  [--json]

Param	Required	Default	Description
--tpTriggerPx	No	-	Attached take-profit trigger price
--tpOrdPx	No	-	TP order price; use -1 for market execution
--slTriggerPx	No	-	Attached stop-loss trigger price
--slOrdPx	No	-	SL order price; use -1 for market execution

--instId format: BTC-USDT-<YYMMDD> (delivery date suffix).

---

Futures — Cancel Order

okx futures cancel --instId <id> --ordId <id> [--json]

---

Futures — Amend Order

okx futures amend --instId <id> [--ordId <id>] [--clOrdId <id>] \
  [--newSz <n>] [--newPx <p>] [--json]

Must provide at least one of --newSz or --newPx.

---

Futures — Close Position

okx futures close --instId <id> --mgnMode <cross|isolated> \
  [--posSide <long|short>] [--autoCxl] [--json]

Param	Required	Default	Description
--instId	Yes	-	Futures instrument (e.g., BTC-USDT-260328)
--mgnMode	Yes	-	cross or isolated
--posSide	Cond.	-	long or short — required in hedge mode
--autoCxl	No	false	Auto-cancel pending orders before closing

Closes the entire position at market price.

---

Futures — Set Leverage

okx futures leverage --instId <id> --lever <n> --mgnMode <cross|isolated> \
  [--posSide <long|short>] [--json]

Param	Required	Default	Description
--instId	Yes	-	Futures instrument
--lever	Yes	-	Leverage multiplier (e.g., 10)
--mgnMode	Yes	-	cross or isolated
--posSide	Cond.	-	long or short — required for isolated mode in hedge mode

---

Futures — Get Leverage

okx futures get-leverage --instId <id> --mgnMode <cross|isolated> [--json]

Returns table: instId, mgnMode, posSide, lever.

---

Futures — List Orders

okx futures orders [--instId <id>] [--status <open|history|archive>] [--json]

--status	Effect
open	Active/pending orders (default)
history	Recent completed/cancelled
archive	Older history

---

Futures — Positions

okx futures positions [<instId>] [--json]

Returns: instId, side, pos, avgPx, upl, lever.

---

Futures — Fills

okx futures fills [--instId <id>] [--ordId <id>] [--archive] [--json]

---

Futures — Get Order

okx futures get --instId <id> [--ordId <id>] [--json]

---

Futures — Place Algo (TP/SL / Trail)

okx futures algo place --instId <id> --side <buy|sell> \
  --ordType <oco|conditional|move_order_stop> --sz <n> \
  --tdMode <cross|isolated> \
  [--posSide <long|short>] [--reduceOnly] \
  [--tpTriggerPx <p>] [--tpOrdPx <p|-1>] \
  [--slTriggerPx <p>] [--slOrdPx <p|-1>] \
  [--callbackRatio <r>] [--callbackSpread <s>] [--activePx <p>] \
  [--json]

Param	Required	Default	Description
--instId	Yes	-	Futures instrument (e.g., BTC-USDT-<YYMMDD>)
--side	Yes	-	buy or sell
--ordType	Yes	-	oco, conditional, or move_order_stop
--sz	Yes	-	Number of contracts
--tdMode	Yes	-	cross or isolated
--posSide	Cond.	-	long or short — required in hedge mode
--reduceOnly	No	false	Close-only; will not open a new position if one doesn't exist
--tpTriggerPx	Cond.	-	Take-profit trigger price
--tpOrdPx	Cond.	-	TP order price; use -1 for market execution
--slTriggerPx	Cond.	-	Stop-loss trigger price
--slOrdPx	Cond.	-	SL order price; use -1 for market execution
--callbackRatio	Cond.	-	Trailing callback as a ratio (e.g., 0.02 = 2%); cannot be combined with --callbackSpread
--callbackSpread	Cond.	-	Trailing callback as fixed price distance; cannot be combined with --callbackRatio
--activePx	No	-	Price at which trailing stop becomes active

--instId format: BTC-USDT-<YYMMDD> (e.g., BTC-USDT-250328). For move_order_stop: provide --callbackRatio or --callbackSpread (one required).

---

Futures — Place Trailing Stop

okx futures algo trail --instId <id> --side <buy|sell> --sz <n> \
  --tdMode <cross|isolated> \
  [--posSide <long|short>] [--reduceOnly] \
  [--callbackRatio <ratio>] [--callbackSpread <spread>] \
  [--activePx <price>] \
  [--json]

Param	Required	Default	Description
--callbackRatio	Cond.	-	Trailing callback as a ratio (e.g., 0.02 = 2%); cannot be combined with --callbackSpread
--callbackSpread	Cond.	-	Trailing callback as fixed price distance; cannot be combined with --callbackRatio
--activePx	No	-	Price at which trailing stop becomes active

---

Futures — Amend Algo

okx futures algo amend --instId <id> --algoId <id> \
  [--newSz <n>] [--newTpTriggerPx <p>] [--newTpOrdPx <p>] \
  [--newSlTriggerPx <p>] [--newSlOrdPx <p>] [--json]

---

Futures — Cancel Algo

okx futures algo cancel --instId <id> --algoId <id> [--json]

---

Futures — Algo Orders

okx futures algo orders [--instId <id>] [--history] [--ordType <type>] [--json]

---

Option — Get Instruments (Option Chain)

okx option instruments --uly <underlying> [--expTime <YYMMDD>] [--json]

Param	Required	Description
--uly	Yes	Underlying, e.g. BTC-USD or ETH-USD
--expTime	No	Filter by expiry date, e.g. 250328

Returns: instId, uly, expTime, stk (strike), optType (C/P), state.

Run this before placing any option order to get the exact instId.

---

Option — Get Greeks

okx option greeks --uly <underlying> [--expTime <YYMMDD>] [--json]

Returns IV (markVol) and BS Greeks (deltaBS, gammaBS, thetaBS, vegaBS) plus markPx for each contract.

---

Option — Place Order

okx option place --instId <id> --side <buy|sell> --ordType <type> \
  --tdMode <cash|cross|isolated> --sz <n> \
  [--px <price>] [--reduceOnly] [--clOrdId <id>] [--json]

Param	Required	Default	Description
--instId	Yes	-	e.g. BTC-USD-250328-95000-C (call) or ...-P (put)
--side	Yes	-	buy or sell
--ordType	Yes	-	market, limit, post_only, fok, ioc
--tdMode	Yes	-	cash = buyer (full premium); cross/isolated = seller (margin)
--sz	Yes	-	Number of contracts
--px	Cond.	-	Required for limit, post_only, fok, ioc
--reduceOnly	No	false	Close-only; do not open a new position

tdMode rules:

• Buyer (side=buy): always use cash — pay full premium, no margin call risk
• Seller (side=sell): use cross or isolated — margin required, liquidation risk

---

Option — Cancel Order

okx option cancel --instId <id> [--ordId <id>] [--clOrdId <id>] [--json]

---

Option — Amend Order

okx option amend --instId <id> [--ordId <id>] [--clOrdId <id>] \
  [--newSz <n>] [--newPx <p>] [--json]

Must provide at least one of --newSz or --newPx.

---

Option — Batch Cancel

okx option batch-cancel --orders '<JSON>' [--json]

--orders is a JSON array of up to 20 objects, each {"instId":"...","ordId":"..."}:

okx option batch-cancel --orders '[{"instId":"BTC-USD-250328-95000-C","ordId":"123"},{"instId":"BTC-USD-250328-90000-P","ordId":"456"}]'

---

Option — List Orders

okx option orders [--instId <id>] [--uly <underlying>] [--history] [--archive] [--json]

Flag	Effect
(default)	Live/pending orders
--history	Historical (7d)
--archive	Older archive (3mo)

---

Option — Get Order

okx option get --instId <id> [--ordId <id>] [--clOrdId <id>] [--json]

Returns: ordId, instId, side, ordType, px, sz, fillSz, avgPx, state, cTime.

---

Option — Positions

okx option positions [--instId <id>] [--uly <underlying>] [--json]

Returns: instId, posSide, pos, avgPx, upl, deltaPA, gammaPA, thetaPA, vegaPA. Only non-zero positions shown.

---

Option — Fills

okx option fills [--instId <id>] [--ordId <id>] [--archive] [--json]

--archive: access fills beyond the default 3-day window (up to 3 months).

---

MCP Tool Reference

Tool	Description
spot_place_order	Place spot order
spot_cancel_order	Cancel spot order
spot_amend_order	Amend spot order
spot_place_algo_order	Place spot TP/SL algo
spot_amend_algo_order	Amend spot algo
spot_cancel_algo_order	Cancel spot algo
spot_get_orders	List spot orders
spot_get_order	Get single spot order
spot_get_fills	Spot fill history
spot_get_algo_orders	List spot algo orders
swap_place_order	Place swap order
swap_cancel_order	Cancel swap order
swap_amend_order	Amend swap order
swap_close_position	Close swap position
swap_set_leverage	Set swap leverage
swap_place_algo_order	Place swap TP/SL algo
swap_place_move_stop_order	Place trailing stop (swap/futures)
swap_amend_algo_order	Amend swap algo
swap_cancel_algo_orders	Cancel swap algo
swap_get_positions	Swap positions
swap_get_orders	List swap orders
swap_get_order	Get single swap order
swap_get_fills	Swap fill history
swap_get_leverage	Get swap leverage
swap_get_algo_orders

---

Input / Output Examples

"Buy 0.05 BTC at market"

okx spot place --instId BTC-USDT --side buy --ordType market --sz 0.05
# → Order placed: 7890123456 (OK)

"Set a limit sell for 0.1 ETH at $3500"

okx spot place --instId ETH-USDT --side sell --ordType limit --sz 0.1 --px 3500
# → Order placed: 7890123457 (OK)

"Show my open spot orders"

okx spot orders
# → table: ordId, instId, side, type, price, size, filled, state

"Long 10 contracts BTC perp at market (cross margin)"

okx swap place --instId BTC-USDT-SWAP --side buy --ordType market --sz 10 \
  --tdMode cross --posSide long
# → Order placed: 7890123458 (OK)

"Long 10 contracts BTC perp with TP at $105k and SL at $88k"

okx swap place --instId BTC-USDT-SWAP --side buy --ordType market --sz 10 \
  --tdMode cross --posSide long \
  --tpTriggerPx 105000 --tpOrdPx -1 --slTriggerPx 88000 --slOrdPx -1
# → Order placed: 7890123459 (OK) — TP/SL attached via attachAlgoOrds

"Set take profit at $105k and stop loss at $88k on an existing BTC perp long"

okx swap algo place --instId BTC-USDT-SWAP --side sell --ordType oco --sz 10 \
  --tdMode cross --posSide long \
  --tpTriggerPx 105000 --tpOrdPx -1 \
  --slTriggerPx 88000 --slOrdPx -1
# → Algo order placed: ALGO456789 (OK)

"Close my ETH perp position"

okx swap close --instId ETH-USDT-SWAP --mgnMode cross --posSide long
# → Position closed: ETH-USDT-SWAP long

"Set BTC perp leverage to 5x (cross)"

okx swap leverage --instId BTC-USDT-SWAP --lever 5 --mgnMode cross
# → Leverage set: 5x BTC-USDT-SWAP

"Long 1 contract TSLA stock token at market (cross margin)"

okx swap place --instId TSLA-USDT-SWAP --side buy --ordType market --sz 1 \
  --tdMode cross --posSide long
# → Order placed: 7890123461 (OK) [profile: live]

"Open short on NVDA, 2 contracts"

okx swap place --instId NVDA-USDT-SWAP --side sell --ordType market --sz 2 \
  --tdMode cross --posSide short
# → Order placed: 7890123462 (OK) [profile: live]

"Place a 2% trailing stop on my BTC perp long"

okx swap algo trail --instId BTC-USDT-SWAP --side sell --sz 10 \
  --tdMode cross --posSide long --callbackRatio 0.02
# → Trailing stop placed: TRAIL123 (OK)

"Place a 3% trailing stop on my spot BTC"

okx spot algo trail --instId BTC-USDT --side sell --sz 0.01 --callbackRatio 0.03
# → Trailing stop placed: TRAIL456 (OK)

"Place a 2% trailing stop on my BTC futures long"

okx futures algo trail --instId BTC-USDT-<YYMMDD> --side sell --sz 5 \
  --tdMode cross --posSide long --callbackRatio 0.02
# → Trailing stop placed: TRAIL789 (OK)

"Close my BTC futures long position"

okx futures close --instId BTC-USDT-260328 --mgnMode cross --posSide long
# → Position closed: BTC-USDT-260328 long

"Set BTC futures leverage to 10x (cross)"

okx futures leverage --instId BTC-USDT-260328 --lever 10 --mgnMode cross
# → Leverage set: 10x BTC-USDT-260328

"Place a TP at $105k and SL at $88k on my ETH futures long"

okx futures algo place --instId ETH-USDT-260328 --side sell --ordType oco --sz 5 \
  --tdMode cross --posSide long \
  --tpTriggerPx 105000 --tpOrdPx -1 \
  --slTriggerPx 88000 --slOrdPx -1
# → Algo order placed: ALGO789012 (OK)

"Show my open swap positions"

okx swap positions
# → table: instId, side, size, avgPx, upl, uplRatio, lever

"What are my recent fill trades for BTC spot?"

okx spot fills --instId BTC-USDT
# → table: instId, side, fillPx, fillSz, fee, ts

"Show me the BTC option chain expiring March 28"

okx option instruments --uly BTC-USD --expTime 250328
# → table: instId, expTime, stk, optType (C/P), state

"What's the IV and delta for BTC options expiring March 28?"

okx option greeks --uly BTC-USD --expTime 250328
# → table: instId, delta, gamma, theta, vega, iv (markVol), markPx

"Buy 1 BTC call at strike 95000 expiring March 28, limit at 0.005 BTC"

okx option place --instId BTC-USD-250328-95000-C \
  --side buy --ordType limit --tdMode cash --sz 1 --px 0.005
# → Order placed: 7890123460 (OK)

"Show my open option positions"

okx option positions
# → table: instId, posSide, pos, avgPx, upl, delta, gamma, theta, vega

Edge Cases

Spot

• Market order size: --sz is in base currency (e.g., BTC amount), not USDT
• Insufficient balance: check okx-cex-portfolio account balance before placing
• Price not required: market orders don't need --px; limit / post_only / fok / ioc do
• Algo oco: provide both tpTriggerPx and slTriggerPx; price -1 means market execution at trigger
• Fills vs orders: fills shows executed trades; orders --history shows all orders including cancelled
• Trailing stop: use either --callbackRatio (relative, e.g., 0.02) or --callbackSpread (absolute price), not both; --tdMode and --posSide are not required for spot
• Algo on close side: always set --side opposite to position direction (e.g., long spot holding → sell algo, short spot → buy algo)

Swap / Perpetual

• sz unit: always number of contracts — never pass a USDT amount directly. If the user gives a USDT amount, apply "Sz Conversion Rules for Derivatives" before placing
• Linear vs inverse: BTC-USDT-SWAP is linear (USDT-margined); BTC-USD-SWAP is inverse (BTC-margined). For inverse, warn the user that margin and P&L are settled in BTC
• posSide: required in hedge mode (long_short_mode); omit in net mode. Check okx account config for posMode
• tdMode: use cross for cross-margin, isolated for isolated margin
• Close position: swap close closes the entire position; to partial close, use swap place with a reduce-only algo
• Leverage: max leverage varies by instrument and account level; exchange rejects if exceeded
• Trailing stop: use either --callbackRatio (relative, e.g., 0.02) or --callbackSpread (absolute price), not both
• Algo on close side: always set --side opposite to position (e.g., long position → sell algo)
• Stock tokens (instCategory=3): instruments like TSLA-USDT-SWAP, NVDA-USDT-SWAP follow the same linear SWAP flow (USDT-margined, sz in contracts). Key differences: (1) max leverage 5x — check with swap get-leverage before placing, set with swap leverage --lever <n≤5>; (2) --posSide is always required; (3) trading restricted to stock market hours (US stocks: Mon–Fri ~09:30–16:00 ET) — confirm live ticker before placing. Use okx market stock-tokens to list available instruments

Futures / Delivery

• sz unit: always number of contracts — apply "Sz Conversion Rules for Derivatives" when user gives a USDT amount
• Linear vs inverse: BTC-USDT-<YYMMDD> is linear; BTC-USD-<YYMMDD> is inverse (USD face value, BTC settlement). For inverse, sz = floor(usdtAmt / ctVal) where ctVal is typically 100 USD
• instId format: delivery futures use date suffix: BTC-USDT-<YYMMDD> (e.g., BTC-USDT-260328 for March 28, 2026 expiry)
• Expiry: futures expire on the delivery date — all positions auto-settle; do not hold through expiry unless intended
• Close position: use futures close to close the entire position at market price — same semantics as swap close; to partial close, use futures place with --reduceOnly
• Leverage: futures leverage sets leverage for a futures instrument, same constraints as swap; max leverage varies by instrument and account level
• Trailing stop: use either --callbackRatio (relative, e.g., 0.02) or --callbackSpread (absolute price), not both; same parameters as swap — --tdMode and --posSide required in hedge mode
• Algo on close side: always set --side opposite to position (e.g., long position → sell algo)

Options

• sz unit: always number of contracts — apply "Sz Conversion Rules for Derivatives" when user gives a USDT amount. For inverse options (BTC-USD), premium is quoted in BTC; convert via sz = floor(usdtAmt / (markPx_BTC × btcPx × ctVal))
• instId format: {uly}-{YYMMDD}-{strike}-{C|P} — e.g. BTC-USD-250328-95000-C; always run okx option instruments --uly BTC-USD first to confirm the exact contract exists
• tdMode: buyers always use cash (full premium paid upfront, no liquidation); sellers use cross or isolated (margin required, liquidation risk)
• px unit: quoted in base currency for inverse options (e.g. 0.005 = 0.005 BTC premium per contract); always show equivalent USDT value to the user
• Expiry: options expire at 08:00 UTC on the expiry date; in-the-money options are auto-exercised; do not hold through expiry unless intended
• No TP/SL algo on options: the swap algo / spot algo commands do not apply to option positions; manage risk by cancelling/amending option orders directly
• Greeks in positions: okx option positions returns live portfolio Greeks (deltaPA, gammaPA, etc.) from the account's position-level calculation, while okx option greeks returns BS model Greeks per contract

Global Notes

• All write commands require valid credentials in ~/.okx/config.toml or env vars
• --profile <name> is required for all authenticated commands; see "Credential & Profile Check" section
• Every command result includes a [profile: <name>] tag for audit reference
• --json returns raw OKX API v5 response
• Rate limit: 60 order operations per 2 seconds per UID
• Batch operations (batch cancel, batch amend) are available via MCP tools directly if needed
• Position mode (net vs long_short_mode) affects whether --posSide is required
• Spot --sz is base currency amount; swap/futures/options --sz is always number of contracts — never a USDT amount. When the user specifies a USDT (or other currency) amount for derivatives, always run the sz conversion flow in "Sz Conversion Rules for Derivatives" and confirm the calculated contract count with the user before placing