Loner1024/claude-mission-plugin

Letzte erfasste Quellaktivität: 7. April 2026 um 18:02

SkillsMP-Katalog aktualisiert: 12. November 2026 um 12:52

gesammelte Skills: 6

GitHub-Stars: 0
GitHub-Forks: 0

Mit einem KI-Assistenten installieren

Diesen Prompt kopieren und in den verwendeten KI-Assistenten einfügen.

Follow https://skillsmp.com/skill-install/prompt.md to install Agent Skills from https://github.com/Loner1024/claude-mission-plugin.

README des Repositorys

README-Quelldatei: README.md

README-Quelldatei lesen

Vollständige README anzeigen

# Claude Mission Plugin [中文](#中文) | [English](#english) ## 中文 ### 概述 `mission` 是一个面向 Claude Code 的本地任务编排插件。 - Claude 只负责 orchestrator，不直接充当 worker 或 validator - Kimi CLI 负责执行 work 任务 - Codex CLI 负责执行 validate 任务 - 任务视图采用 task-first 模式，按单个 `work` / `validate` 任务显示进度 - provider 通过 adapter 接口接入，后续可以替换或扩展 ### 功能特性 - 单一命令面启动 mission：`/mission:start <prompt>`（Claude 先规划 milestones，再交给 runtime 执行） - 辅助命令查看、推进、取消和检查 mission 运行状态 - workspace 级默认 provider 选择：`/mission:providers [worker] [validator]` - mission 启动时会绑定当时的 worker / validator，后续 `resume` 不受 workspace 默认值变更影响 - validate 默认使用本机 `codex` CLI，`MISSION_CODEX_VALIDATOR_RUNNER` 仅作为 override - 插件 runtime bundle 已随插件一起发布，不依赖仓库根目录的 `dist/` ### 当前 Provider - Worker: `kimi` - Validator: `codex` ### 依赖 - Node.js - Bun - Kimi CLI - Codex CLI ### 安装 #### 从 GitHub 安装 ```bash claude plugin marketplace add Loner1024/claude-mission-plugin --scope user claude plugin install mission@local-mission --scope user claude plugin enable mission@local-mission --scope user ``` 如果当前 Claude Code 会话已经打开，执行： ```text /reload-plugins ``` #### 从本地源码安装 ```bash claude plugin marketplace add /absolute/path/to/claude-mission-plugin/.claude-plugin/marketplace.json --scope local claude plugin install mission@local-mission --scope local claude plugin enable mission@local-mission --scope local ``` 源码变更后更新本地安装： ```bash claude plugin update mission@local-mission --scope local ``` ### 命令 - `/mission:setup` - 检查 Kimi / Codex 是否可用 - 显示当前 workspace 默认 worker / validator - `/mission:providers [worker] [validator]` - 无参数时显示当前默认 provider - 带两个参数时写入 workspace 默认 provider - `/mission:start <mission-prompt>` - 先由 Claude 生成英文 goal + milestones 计划 - 然后调用 runtime 创建 mission，并自动推进 task-first 任务列表 - `/mission:status [mission-id]` - 查看当前 workspace 最新 mission，或指定 mission 的任务状态 - `/mission:resume <mission-id>` - 推进一个可执行任务 - `/mission:result [mission-id]` - 查看 mission 当前结果摘要 - `/mission:cancel <mission-id>` - 取消 mission，并把未完成任务同步标记为 `canceled` ### Validator Runner 覆盖 validate 默认走本机 `codex` CLI。 - 显式覆盖 runner：`MISSION_CODEX_VALIDATOR_RUNNER` - 覆盖默认 codex 可执行文件路径：`CODEX_BINARY` 示例： ```bash export MISSION_CODEX_VALIDATOR_RUNNER=/absolute/path/to/validator-runner.ts export CODEX_BINARY=/absolute/path/to/codex ``` 如果未设置 `MISSION_CODEX_VALIDATOR_RUNNER`，插件会检测： ```bash codex login status ``` 只有默认 Codex CLI 或 override runner 至少有一个可用时，validate 任务才会继续执行。 ### 开发构建： ```bash bun run build ``` 测试： ```bash bun test ``` 类型检查： ```bash bun run typecheck ``` 插件校验： ```bash claude plugin validate .claude-plugin/marketplace.json claude plugin validate plugins/mission/.claude-plugin/plugin.json ``` ## English ### Overview `mission` is a local mission orchestration plugin for Claude Code. - Claude acts only as the orchestrator, never as the worker or validator - Kimi CLI executes `work` tasks - Codex CLI executes `validate` tasks - Progress is surfaced in a task-first view, one `work` / `validate` task at a time - Providers are wired through adapters so they can be replaced later ### Features - Single entrypoint to start a mission: `/mission:start <prompt>` (Claude plans milestones first, then runtime executes) - Helper commands to inspect, advance, cancel, and validate mission runtime state - Workspace-level default provider selection with `/mission:providers [worker] [validator]` - The selected worker / validator pair is pinned into the mission at start time - Validation uses the local `codex` CLI by default; `MISSION_CODEX_VALIDATOR_RUNNER` is only an override - The runtime bundle is shipped inside the plugin, so installed plugins do not depend on a repo-root `dist/` ### Current Providers - Worker: `kimi` - Validator: `codex` ### Requirements - Node.js - Bun - Kimi CLI - Codex CLI ### Installation #### Install from GitHub ```bash claude plugin marketplace add Loner1024/claude-mission-plugin --scope user claude plugin install mission@local-mission --scope user claude plugin enable mission@local-mission --scope user ``` If Claude Code is already running, reload plugins: ```text /reload-plugins ``` #### Install from local source ```bash claude plugin marketplace add /absolute/path/to/claude-mission-plugin/.claude-plugin/marketplace.json --scope local claude plugin install mission@local-mission --scope local claude plugin enable mission@local-mission --scope local ``` Update an existing local install after source changes: ```bash claude plugin update mission@local-mission --scope local ``` ### Commands - `/mission:setup` - Checks Kimi / Codex availability - Shows the current workspace default worker / validator - `/mission:providers [worker] [validator]` - Without arguments, shows current defaults - With two arguments, persists workspace defaults - `/mission:start <mission-prompt>` - Claude first drafts an English goal + milestone plan - Then runtime creates the mission and advances the task-first loop - `/mission:status [mission-id]` - Shows the latest mission in the current workspace, or a specific mission - `/mission:resume <mission-id>` - Advances exactly one executable task - `/mission:result [mission-id]` - Shows the current mission result summary - `/mission:cancel <mission-id>` - Cancels the mission and marks unfinished tasks as `canceled` ### Validator Runner Override Validation uses the local `codex` CLI by default. - Override the validator runner with `MISSION_CODEX_VALIDATOR_RUNNER` - Override the default Codex binary path with `CODEX_BINARY` Example: ```bash export MISSION_CODEX_VALIDATOR_RUNNER=/absolute/path/to/validator-runner.ts export CODEX_BINARY=/absolute/path/to/codex ``` When `MISSION_CODEX_VALIDATOR_RUNNER` is not set, the plugin checks: ```bash codex login status ``` At least one of the default Codex CLI or the explicit override runner must be available before a validate task can proceed. ### Development Build: ```bash bun run build ``` Test: ```bash bun test ``` Type check: ```bash bun run typecheck ``` Plugin validation: ```bash claude plugin validate .claude-plugin/marketplace.json claude plugin validate plugins/mission/.claude-plugin/plugin.json ```

README des Repositorys wird geladen…