wireclaw

name	wireclaw
description	Control WireClaw IoT devices on your network. Use when the user wants to interact with physical hardware: LEDs, GPIO pins, sensors, relays, temperature, or create automation rules on ESP32 microcontrollers. Also use when the user references "wireclaw", "ESP32 devices", or physical/hardware automation.
tools	["Bash","Read"]
metadata	{"openclaw":{"requires":{"binaries":["nats"]},"env":["WIRECLAW_NATS_URL"]}}

WireClaw - Physical World Automation for OpenClaw

WireClaw is an AI agent running on ESP32 microcontrollers ($5 chips) that controls real hardware: LEDs, GPIO pins, relays, sensors. It connects via NATS.

You generate tool calls. WireClaw executes them directly on hardware. No second LLM involved. Rules created on WireClaw persist and run 24/7 on the chip, even when OpenClaw, the NATS server, or WiFi is offline.

How to Talk to WireClaw

All communication uses nats req (request/reply). Never use nats pub for tool execution - you need the response to confirm success.

Flat JSON protocol - the "tool" field names the tool, all other fields are the tool's parameters at the same level:

nats req <device>.tool_exec '{"tool":"<tool_name>", ...params}'

# Response format:
{"ok":true,"result":"..."}
{"ok":false,"error":"..."}

IMPORTANT: The top-level key is "tool", not "name". This avoids collision with tools that have a "name" parameter (like device_register).

Wrapper Script

A convenience wrapper is available at scripts/wc.sh:

# Tool execution - merges "tool" key automatically
scripts/wc.sh exec <device> <tool_name> '{"param":"value"}'

# Query device capabilities
scripts/wc.sh caps <device>

# Discover all WireClaw devices on the network
scripts/wc.sh discover

# Subscribe to a device's event stream
scripts/wc.sh sub <device>

You can use either the wrapper or raw nats req commands - both work identically.

Discovery

# Find all WireClaws on the network
scripts/wc.sh discover
# or: nats req "_ion.discover" "" --replies=0 --timeout=3s

# Query a specific device
scripts/wc.sh caps wireclaw-01
# or: nats req wireclaw-01.capabilities ""

Returns: device name, version, IP, registered sensors/actuators with current values, active rules with status, and available tool names.

Critical Rules - Read Before Generating Tool Calls

Direct action vs. automation

• For direct requests ("set LED pink", "turn on pin 4"), use the direct tool: led_set, gpio_write, actuator_set, etc. Do NOT create a rule.
• Only create rules when the user asks for AUTOMATION with a condition: "when temperature exceeds...", "if sensor reads...", "whenever...", "at 8am..."

One rule = one action type

Each rule supports only ONE action type (led_set OR telegram OR gpio_write, etc). You CANNOT combine action types in a single rule.

To do two different actions on the same condition (e.g. LED + Telegram), create TWO separate rules with the same sensor/condition/threshold.

When the user asks to ADD a new action to existing automation, do NOT delete existing rules. Create an additional rule alongside them.

on_action + off_action pattern

A single rule can have BOTH an on_action (fires when condition becomes true) and an off_action (fires when condition becomes false). Use this instead of creating two opposing rules.

Example: "LED red when hot, green when cool" = ONE rule with on_action=led_set (red) + off_action=led_set (green).

Edge-triggered behavior

All conditions except "always" are edge-triggered. A rule fires ONCE when the condition transitions from false->true (on_action) and once when true->false (off_action). It does NOT fire repeatedly while the condition stays true.

The LED is NOT a registered actuator

The onboard RGB LED is controlled via led_set tool or on_action="led_set" in rules. Do NOT use actuator_name for the LED - that field is for registered actuator devices like relays or motors.

Available Tools

Hardware - Direct Control

• led_set - Set onboard RGB LED: {"tool":"led_set","r":0-255,"g":0-255,"b":0-255}
  • r=0, g=0, b=0 turns LED off
• gpio_write - Set GPIO pin: {"tool":"gpio_write","pin":N,"value":0|1}
• gpio_read - Read GPIO pin: {"tool":"gpio_read","pin":N} -> HIGH/LOW
• temperature_read - Read chip temperature (no params) -> degrees C

Sensors & Actuators

• device_register - Register hardware: {"tool":"device_register","name":"fan","type":"relay","pin":16} Types: digital_in, analog_in, ntc_10k (inverted=true if NTC on 3.3V side), ldr, nats_value, serial_text, digital_out, relay (inverted logic), pwm
• device_list - List all registered devices with current readings
• device_remove - Remove by name: {"tool":"device_remove","name":"fan"}
• sensor_read - Read a sensor: {"tool":"sensor_read","name":"chip_temp"} -> value + unit
• actuator_set - Set an actuator: {"tool":"actuator_set","name":"fan","value":1}

Pre-registered Sensors (always available, no registration needed)

• chip_temp - Internal chip temperature in degrees C
• clock_hour - Current hour 0-23
• clock_minute - Current minute 0-59
• clock_hhmm - Time as hour x 100 + minute (e.g. 810=08:10, 1830=18:30)

NATS Virtual Sensors

Register a sensor that receives values from any NATS subject:

scripts/wc.sh exec wireclaw-01 device_register '{"name":"room_temp","type":"nats_value","subject":"home.room.temp","unit":"C"}'

• No pin needed. Stores the last value received on that subject.
• Accepted payloads: bare numbers ("32.5"), JSON ({"value":32.5}), booleans ("on"/"off" -> 1/0).
• JSON payloads can include a "message" field: {"value":32.5,"message":"Alert text"}.
• Use {sensor_name:msg} in templates to insert the message field.
• Then create rules on it like any physical sensor.

This is powerful for OpenClaw integration: publish to a NATS subject from OpenClaw, and WireClaw reacts to it with persistent rules.

Serial Text UART

• {"tool":"device_register","name":"x","type":"serial_text","baud":9600} - attach serial device on UART1
• Only ONE serial_text device allowed. Fixed pins per chip: C6/C3=RX4/TX5, S3=RX19/TX20.
• Stores last received text line. Numbers parsed as float for rule conditions.
• IMPORTANT: {name} gives NUMERIC value (0 if text). {name:msg} gives actual TEXT. Always use {name:msg} when forwarding serial text to telegram/nats.
• serial_send tool: sends text to UART. In rules: on_action="serial_send" with on_serial_text="message".
• condition="change" detects both numeric value changes AND text changes.

Automation Rules

rule_create - Create a persistent rule that runs 24/7 on the ESP32:

scripts/wc.sh exec wireclaw-01 rule_create '{"rule_name":"heat alert","sensor_name":"chip_temp","condition":"gt","threshold":35,"on_action":"led_set","on_r":255,"on_g":0,"on_b":0,"off_action":"led_set","off_r":0,"off_g":255,"off_b":0}'

Conditions: gt (>), lt (<), eq (==), neq (!=), change, always

Actions (one type per rule):

• led_set - on_r, on_g, on_b / off_r, off_g, off_b (0-255)
• gpio_write - on_pin, on_value / off_pin, off_value
• telegram - on_telegram_message / off_telegram_message
• nats_publish - on_nats_subject, on_nats_payload / off variants
• actuator - actuator_name (registered device name, NOT "led")
• serial_send - on_serial_text / off_serial_text

Template variables in messages:

• {value} - the triggering sensor's current reading
• {device_name} - reads ANY named sensor's value at fire time (e.g. {chip_temp} in a message on a different sensor's rule)
• {name:msg} - the message field from nats_value/serial_text payloads

Periodic rules: Use condition="always" with interval_seconds=N for repeating tasks. Example: publish temperature every 60 seconds:

scripts/wc.sh exec wireclaw-01 rule_create '{"rule_name":"temp publish","sensor_name":"chip_temp","condition":"always","interval_seconds":60,"on_action":"nats_publish","on_nats_subject":"home.temp","on_nats_payload":"{value}"}'

"always" rules fire repeatedly. All other conditions are edge-triggered.

Time-based rules:

• Whole hours: sensor_name="clock_hour", condition="eq", threshold=18 -> at 6 PM
• Exact times: sensor_name="clock_hhmm", condition="eq", threshold=810 -> at 08:10
• Ranges: sensor_name="clock_hhmm", condition="gt", threshold=2200 -> after 10 PM
• For "do X at time Y", use ONE rule with on_action + off_action. The off_action auto-fires when the minute passes (edge-triggered).

rule_list - List all rules with status. Always call this before deleting.

rule_delete - Delete by ID: {"tool":"rule_delete","rule_id":"rule_01"} or {"tool":"rule_delete","rule_id":"all"} to wipe all.

rule_enable - Enable/disable without deleting: {"tool":"rule_enable","rule_id":"rule_01","enabled":false}

Chain Automation (multi-step sequences)

For 2-5 step automations, use chain_create. One tool call creates the full chain.

scripts/wc.sh exec wireclaw-01 chain_create '{"sensor_name":"chip_temp","condition":"gt","threshold":40,"step1_action":"telegram","step1_message":"Overheating: {value}C","step2_action":"led_set","step2_delay":5,"step2_r":255,"step2_g":0,"step2_b":0,"step3_action":"led_set","step3_delay":10,"step3_r":0,"step3_g":0,"step3_b":0}'

• step1 fires immediately on trigger. step2+ fire after their delay (seconds).
• For simple single-action rules, use rule_create instead.

System & Communication

• device_info - Heap, uptime, WiFi, chip info
• file_read - Read file from ESP32 filesystem: {"tool":"file_read","path":"/memory.txt"}
• file_write - Write file: {"tool":"file_write","path":"/memory.txt","content":"..."}
• nats_publish - Publish NATS message: {"tool":"nats_publish","subject":"...","payload":"..."}
• serial_send - Send text over UART: {"tool":"serial_send","text":"GET_TEMP"}
• remote_chat - Chat with another WireClaw via its LLM: {"tool":"remote_chat","device":"garden-node","message":"what is your temperature?"} (This invokes the other device's LLM. For direct tool calls on another device, use nats req other-device.tool_exec instead.)

Subscribing to Events

scripts/wc.sh sub wireclaw-01
# or: nats sub "wireclaw-01.events"

Events: online announcements, rule triggers (with reading/threshold), tool_exec results.

Cross-Domain Automation Patterns

Digital trigger -> Physical action

OpenClaw detects something digital (CI failure, calendar event, email) and sends a direct tool call or creates a persistent rule on WireClaw.

Physical trigger -> Digital action (via NATS bridge)

Create a WireClaw rule with on_action="nats_publish". OpenClaw subscribes to that NATS subject using nats sub and triggers digital workflows.

External data -> WireClaw sensor (via nats_value)

OpenClaw publishes data to a NATS subject. WireClaw has a nats_value sensor on that subject. Rules on WireClaw react to changes autonomously.

This is the most powerful pattern: OpenClaw pushes data once, and WireClaw's persistent rules handle all the logic locally, forever, without OpenClaw.

Example: OpenClaw checks weather API, publishes temperature to home.weather.temp. WireClaw has a nats_value sensor on that subject with rules that change LED color based on temperature ranges.

Prefer rules over repeated commands

Once you create a rule on WireClaw, it runs forever on the ESP32 with zero external dependencies. Use direct tool calls (led_set, gpio_write) only for one-off actions. For anything ongoing, create a rule.

Examples

Set LED blue (one-off):

scripts/wc.sh exec wireclaw-01 led_set '{"r":0,"g":0,"b":255}'

Temperature alert with Telegram + LED (needs TWO rules - one action type each):

scripts/wc.sh exec wireclaw-01 rule_create '{"rule_name":"heat telegram","sensor_name":"chip_temp","condition":"gt","threshold":30,"on_action":"telegram","on_telegram_message":"Office is {value}C!","off_action":"telegram","off_telegram_message":"Office cooled to {value}C"}'

scripts/wc.sh exec wireclaw-01 rule_create '{"rule_name":"heat led","sensor_name":"chip_temp","condition":"gt","threshold":30,"on_action":"led_set","on_r":255,"on_g":0,"on_b":0,"off_action":"led_set","off_r":0,"off_g":255,"off_b":0}'

LED at 8:10 AM every day:

scripts/wc.sh exec wireclaw-01 rule_create '{"rule_name":"morning light","sensor_name":"clock_hhmm","condition":"eq","threshold":810,"on_action":"led_set","on_r":255,"on_g":180,"on_b":50,"off_action":"led_set","off_r":0,"off_g":0,"off_b":0}'

Publish sensor data every 60 seconds for OpenClaw to consume:

scripts/wc.sh exec wireclaw-01 rule_create '{"rule_name":"temp stream","sensor_name":"chip_temp","condition":"always","interval_seconds":60,"on_action":"nats_publish","on_nats_subject":"home.office.temp","on_nats_payload":"{value}"}'

Bridge external data into WireClaw (OpenClaw pushes, WireClaw reacts):

# Step 1: Register a NATS virtual sensor on WireClaw
scripts/wc.sh exec wireclaw-01 device_register '{"name":"ci_status","type":"nats_value","subject":"ci.build.status","unit":""}'

# Step 2: Create rule that reacts to it
scripts/wc.sh exec wireclaw-01 rule_create '{"rule_name":"ci alert","sensor_name":"ci_status","condition":"eq","threshold":0,"on_action":"led_set","on_r":255,"on_g":0,"on_b":0,"off_action":"led_set","off_r":0,"off_g":255,"off_b":0}'

# Step 3: From OpenClaw, publish when CI fails/passes
nats pub ci.build.status "0"   # fail -> LED goes red
nats pub ci.build.status "1"   # pass -> LED goes green

Discover all devices:

scripts/wc.sh discover

Register relay + motion-activated light:

scripts/wc.sh exec wireclaw-01 device_register '{"name":"light","type":"relay","pin":16}'
scripts/wc.sh exec wireclaw-01 device_register '{"name":"motion","type":"nats_value","subject":"home.motion"}'
scripts/wc.sh exec wireclaw-01 rule_create '{"rule_name":"motion light","sensor_name":"motion","condition":"eq","threshold":1,"actuator_name":"light"}'

Notes

• NATS server must be running and accessible from both OpenClaw and WireClaw. Default port 4222. Set WIRECLAW_NATS_URL env var if non-default.
• Always discover capabilities first if you don't know what's connected.
• Each WireClaw has its own device name and manages its own hardware.
• remote_chat invokes another device's LLM. For direct tool execution on another device, use nats req other-device.tool_exec instead.