retry-with-backoff

name	retry-with-backoff
description	Execute explicit retry policy: max 3, base 2s, max 30s, full jitter, 60s total budget, respects `Retry-After`. USE WHEN: `error-recovery-strategy` classified error as `transient` and chose `retry`, HTTP 429 with `Retry-After` header, network timeout/refused/reset, queue/lock/eventually-consistent read returned stale, user said "重试" / "retry" / "再试" / "等一下" / "等几秒" / "backoff" / "exponential" / "rate limit" / "429" / "限流". TRIGGER PHRASES: "重试", "retry", "再试", "等一下", "等几秒", "backoff", "exponential", "rate limit", "429", "Retry-After", "throttled", "限流", "busy", "服务忙". SKIP WHEN: error is `deterministic` (won't change on retry), error is `unknown` (escalate to ask-user), work is time-sensitive and 30s backoff is too late.
license	Apache-2.0
compatibility	Requires MiniMax Code with Agent Plugins 1.0 support.
metadata	{"author":"antianqi","version":"0.1.1","inspired-by":"https://github.com/openai/codex/blob/main/codex-rs/code-mode/src/grpc_session/reconnect.rs"}

Retry With Backoff

Retry is the most common recovery action — and the easiest to do badly. Retrying without a budget burns wall-clock and budget. Retrying with too-aggressive a backoff hits the rate-limited service again. Retrying without jitter causes a thundering herd when many agents retry the same service at the same instant.

This Skill defines a single, explicit retry policy. Always state the policy before running the retries. Do not improvise.

When to use

Activate when any of these is true:

• error-recovery-strategy Skill categorised the error as transient and chose retry as the action.
• A rate-limited service (HTTP 429, API quota) returned a Retry-After header.
• A network call timed out, refused, or reset.
• A queue / lock / eventually-consistent read returned a stale or empty result.

When NOT to use

• The error is deterministic (permission denied, file not found). Retry will fail the same way. Switch tool or ask user instead.
• The error is unknown. Retry without a clear reason is gambling. Ask user.
• The work is time-sensitive enough that a 30-second backoff would be too late. In that case, retry without backoff (1 immediate attempt) and then escalate to user on failure.

Process

1. Pick the policy before retrying. Defaults (override only with reason):

   Parameter	Default	Why
   max_attempts	3 (original + 2 retries)	Three strikes; the third strike is the cost of "I'm sure it's transient."
   base_delay_seconds	2	Short enough to be useful, long enough to feel the first retry.
   max_delay_seconds	30	Above 30 s the user has usually already given up mentally.
   total_time_budget_seconds	60	Hard ceiling; beyond this, escalate to user.
   jitter_strategy	full (uniform 0..delay)	Prevents thundering herd.
   respect_retry_after	true (if server provides Retry-After, use it)	Server knows more than we do.

2. State the policy in the response, in one line:

   Retry plan: 3 attempts, base 2s, max 30s, full jitter, budget 60s total
   

3. Compute each retry's actual delay as:

   delay(n) = min(base * 2^(n-1), max_delay)
   actual_delay(n) = uniform(0, delay(n))   # full jitter
   

   For n = 1, 2, 3 with base 2s and max 30s:

   • attempt 1: min(2, 30) = 2s, jittered to [0, 2]s
   • attempt 2: min(4, 30) = 4s, jittered to [0, 4]s
   • attempt 3: min(8, 30) = 8s, jittered to [0, 8]s

4. If the server returned a Retry-After header, use max(delay(n), retry_after) — the server is saying "wait at least this long," not "wait exactly this long."

5. Between attempts, do not start any other tool call. The whole point of the delay is to let the service recover. If you are tempted to "do other work while waiting," surface to the user instead — they may want to know you are in retry mode before you start something else.

6. After the last attempt, evaluate:

   • Success → continue, mention the retry in the result so the user knows it took longer than expected.
   • Still failing → escalate to error-recovery-strategy's ask-user action. Do not silently extend the retry count. Do not skip-with-warning.

7. If the total time budget (60s default) is exceeded mid-retry, stop the next delay and escalate immediately. Time budget is hard, not soft.

Output contract

The user sees, in this order:

• One-line retry plan (max attempts, base, max, jitter, total budget).
• (Per attempt) one line: "attempt N failed: ; waiting Ms."
• After the last attempt: success → continue, failure → escalate to ask-user.
• A short post-mortem: "Why did this take N×t? The server was rate-limiting / network was congested / etc." if you can identify the cause; "unknown" is acceptable.

Example

Retry plan: 3 attempts, base 2s, max 30s, full jitter, budget 60s total

attempt 1: GET /api/v1/users/123 → 503 Service Unavailable
  waiting 1.4s (jittered from 2s)

attempt 2: GET /api/v1/users/123 → 503 Service Unavailable
  waiting 3.1s (jittered from 4s)

attempt 3: GET /api/v1/users/123 → 200 OK
  total time: 4.5s (well under 60s budget)

Counter-example (escalate, do not extend):

Retry plan: 3 attempts, base 2s, max 30s, full jitter, budget 60s total

attempt 1: ... 503
attempt 2: ... 503
attempt 3: ... 503
  total time: 4.5s

Recovery decision: ask-user
Reason: 3 attempts exhausted within budget; error is consistently 503; switching
        to ask rather than extending to attempt 4.

Common pitfalls

• Do not retry without a budget. Even one undeclared retry can burn 5 minutes.
• Do not skip jitter. A "deterministic" delay causes thundering herd when multiple agents retry the same service. Always jitter.
• Do not retry past the total time budget. The budget is hard. If you exceed it, you have failed the Skill, regardless of how many more attempts you could fit.
• Do not retry deterministic errors. A permission-denied error will fail every time. Switch or ask.
• Do not start other work between retries. The delay is for the service, not for you. If the user has new instructions, queue them or surface a question.
• Do not respect Retry-After blindly. It is a minimum, not a maximum. Use max(delay(n), retry_after), not retry_after alone.
• Do not silently extend. If 3 attempts failed, escalate. Do not try 4 "just in case." The user should know the work is blocked.

Verification checklist

• Did you state the retry plan (max attempts, base, max, jitter, budget) before retrying?
• Did you respect any Retry-After from the server (using max)?
• Did you add full jitter to every delay?
• Did you cap each delay at the configured max_delay_seconds?
• Did you stop at max_attempts (no silent extension)?
• Did you stop at total_time_budget_seconds (no overrun)?
• On exhaustion, did you escalate to ask-user (not silent skip)?
• Did you report the total time and cause (if known) in the post-mortem?