assembly-x86

name

assembly-x86

description

x86-64 assembly skill for reading, writing, and debugging assembly code. Use when reading GCC/Clang assembly output, writing inline asm in C/C++, understanding the System V AMD64 ABI calling convention, or debugging register and stack state. Activates on queries about x86-64 assembly, AT&T vs Intel syntax, inline asm, calling conventions, SIMD intrinsics, or reading disassembly output from objdump or GDB.

x86-64 Assembly

Purpose

Guide agents through x86-64 assembly: reading compiler output, understanding the ABI, writing inline asm, and common patterns.

Triggers

• "How do I read the assembly GCC generated?"
• "What are the x86-64 registers?"
• "What is the calling convention on Linux/macOS?"
• "How do I write inline assembly in C?"
• "How do I use SSE/AVX intrinsics?"
• "This assembly uses %rsp / %rbp — what does it mean?"

Workflow

1. Generate and read assembly

# AT&T syntax (GCC default)
gcc -S -O2 -fverbose-asm foo.c -o foo.s

# Intel syntax
gcc -S -masm=intel -O2 foo.c -o foo.s

# From GDB
(gdb) disassemble /s main    # with source
(gdb) x/20i $rip

# From objdump
objdump -d -M intel -S prog  # Intel + source (needs -g)

2. x86-64 registers

64-bit	32-bit	16-bit	8-bit high	8-bit low	Purpose
%rax	%eax	%ax	%ah	%al	Return value / accumulator
%rbx	%ebx	%bx	%bh	%bl	Callee-saved
%rcx	%ecx	%cx	%ch	%cl	4th arg / count
%rdx	%edx	%dx	%dh	%dl	3rd arg / 2nd return
%rsi	%esi	%si	—	%sil	2nd arg
%rdi	%edi	%di	—	%dil	1st arg
%rbp	%ebp	%bp	—	%bpl	Frame pointer (callee-saved)
%rsp	%esp	%sp	—	%spl	Stack pointer
%r8–%r11	%r8d–%r11d	%r8w–%r11w	—	%r8b–%r11b	5th–8th args / caller-saved
%r12–%r15	%r12d–%r15d	%r12w–%r15w	—	%r12b–%r15b	Callee-saved
%rip					Instruction pointer
%rflags	%eflags				Status flags
%xmm0–%xmm7					FP/SIMD args and return
%xmm8–%xmm15					Caller-saved SIMD
%ymm0–%ymm15					AVX 256-bit
%zmm0–%zmm31					AVX-512 512-bit

3. System V AMD64 ABI (Linux, macOS, FreeBSD)

Integer/pointer argument registers (in order): %rdi, %rsi, %rdx, %rcx, %r8, %r9

Floating-point argument registers: %xmm0–%xmm7

Return values:

• Integer: %rax (low), %rdx (high if 128-bit)
• Float: %xmm0 (low), %xmm1 (high)

Caller-saved (scratch): %rax, %rcx, %rdx, %rsi, %rdi, %r8–%r11, %xmm0–%xmm15

Callee-saved (must preserve): %rbx, %rbp, %r12–%r15

Stack: 16-byte aligned before call; call pushes 8 bytes → 16-byte aligned at function entry after prologue.

Red zone: 128 bytes below %rsp may be used by leaf functions without adjusting %rsp. Not available in kernel/signal handlers.

4. Common instruction patterns

Pattern	Meaning
mov %rdi, %rax	Copy rdi to rax
mov (%rdi), %rax	Load 8 bytes from address in rdi
mov %rax, 8(%rdi)	Store rax to rdi+8
lea 8(%rdi), %rax	Load effective address rdi+8 into rax (no memory access)
push %rbx	Push rbx; rsp -= 8
pop %rbx	Pop into rbx; rsp += 8
call foo	Push return addr; jmp foo
ret	Pop return addr; jmp to it
xor %eax, %eax	Zero rax (smaller encoding than mov $0, %rax)
test %rax, %rax	Set ZF if rax == 0 (cheaper than cmp $0, %rax)
cmp $5, %rdi	Set flags for rdi - 5
jl label	Jump if signed less than

5. AT&T vs Intel syntax

Feature	AT&T	Intel
Operand order	source, dest	dest, source
Register prefix	%rax	rax
Immediate prefix	$42	42
Memory operand	8(%rdi)	[rdi+8]
Size suffix	movl, movq	— (inferred)

GCC emits AT&T by default. Use -masm=intel for Intel syntax.

6. Inline assembly (GCC extended asm)

// Basic: increment a register
int x = 5;
__asm__ volatile (
    "incl %0"
    : "=r"(x)   // outputs: =r means write-only register
    : "0"(x)    // inputs: 0 means same as output 0
    : // clobbers: none
);

// CPUID example
uint32_t eax, ebx, ecx, edx;
__asm__ volatile (
    "cpuid"
    : "=a"(eax), "=b"(ebx), "=c"(ecx), "=d"(edx)
    : "a"(1)    // input: leaf 1
);

// Atomic increment
static inline int atomic_inc(volatile int *p) {
    int ret;
    __asm__ volatile (
        "lock; xaddl %0, %1"
        : "=r"(ret), "+m"(*p)
        : "0"(1)
        : "memory"
    );
    return ret + 1;
}

Constraint codes:

• "r" — any general register
• "m" — memory operand
• "i" — immediate integer
• "a", "b", "c", "d" — specific registers (%rax, %rbx, %rcx, %rdx)
• "=" prefix — output (write-only)
• "+" prefix — read-write
• "memory" clobber — tells compiler memory may be modified (barrier)

7. SSE/AVX intrinsics (preferred over inline asm)

#include <immintrin.h>   // includes all x86 SIMD headers

// Add 8 floats at once with AVX
__m256 a = _mm256_loadu_ps(arr_a);   // load 8 floats (unaligned)
__m256 b = _mm256_loadu_ps(arr_b);
__m256 c = _mm256_add_ps(a, b);
_mm256_storeu_ps(result, c);

Check CPU support at compile time: -mavx2 or -march=native. Check at runtime: __builtin_cpu_supports("avx2").

For a full register and instruction reference, see references/reference.md.

Related skills

• Use skills/low-level-programming/assembly-arm for AArch64/ARM assembly
• Use skills/compilers/gcc for -S -masm=intel flag details
• Use skills/debuggers/gdb for stepping through assembly (si, ni, x/i)