Standardmäßig ist der Prompt ausgewählt, der zuerst die Quelle prüft. Sie können zu einem direkten Befehl wechseln oder eine lokale Kopie herunterladen.
Quelldateien prüfen
Lesen Sie SKILL.md und alle von SkillsMP angezeigten Begleitdateien, bevor Sie sich für eine Installation entscheiden.
Mit Codex oder Claude installieren Kopieren Sie diesen Prompt, fügen Sie ihn in Codex, Claude oder einen anderen Assistant ein und lassen Sie die Skill-Seite prüfen und installieren.
Ein direkter Befehl überspringt den Prüf-Prompt. Prüfen Sie die Quelle, bevor Sie ihn ausführen.
A compromised system re-establishes C2 communication after OS reinstallation or disk replacement
Secure Boot has been tampered with, disabled, or shows unexpected Machine Owner Key (MOK) enrollment
Firmware integrity verification fails against vendor-provided baselines
Memory forensics reveals rootkit components loading during early boot phase
Investigating advanced persistent threat (APT) campaigns known to deploy UEFI implants
Auditing firmware security posture for enterprise endpoint hardening
Do not use for standard MBR-based bootkits on legacy BIOS systems without UEFI; use MBR/VBR bootkit analysis instead.
Prerequisites
chipsec framework for SPI flash dumping, UEFI variable inspection, and firmware security modules
UEFITool / UEFIExtract for firmware volume parsing and DXE driver extraction
Python 3.8+ with struct, hashlib, subprocess, and os modules
Bootable Linux live USB for offline analysis (avoid running compromised OS)
Volatility 3 for memory forensics of boot-phase artifacts
YARA with UEFI malware rule sets for pattern-based detection
Access to vendor firmware baselines for integrity comparison
Workflow
Step 1: Dump SPI Flash Firmware
Acquire the UEFI firmware from the SPI flash chip for offline analysis:
# Using chipsec to dump SPI flash contents
python chipsec_util.py spi dump firmware_dump.rom
# Using flashrom as an alternative
flashrom -p internal -r firmware_dump.rom
# Verify dump integritysha256sum firmware_dump.rom
# Read SPI flash descriptor information
python chipsec_util.py spi info
# Check SPI flash region access permissions
python chipsec_main.py -m common.spi_access
# Verify BIOS write protection is enabled
python chipsec_main.py -m common.bios_wp
# Check SPI flash controller lock
python chipsec_main.py -m common.spi_lock
Step 2: Inspect UEFI Variables
Enumerate and analyze UEFI variables for unauthorized modifications:
# List all UEFI variables on a live system
python chipsec_util.py uefi var-list
# List UEFI variables from a SPI flash dump
python chipsec_util.py uefi var-list-spi firmware_dump.rom
python chipsec_util.py uefi var-read SecureBoot 8BE4DF61-93CA-11D2-AA0D-00E098032B8C
python chipsec_util.py uefi var-read SetupMode 8BE4DF61-93CA-11D2-AA0D-00E098032B8C
python chipsec_util.py uefi var-read PK 8BE4DF61-93CA-11D2-AA0D-00E098032B8C
python chipsec_util.py uefi var-read KEK 8BE4DF61-93CA-11D2-AA0D-00E098032B8C
python chipsec_util.py uefi var-read db D719B2CB-3D3A-4596-A3BC-DAD00E67656F
python chipsec_util.py uefi keys
python chipsec_main.py -m common.secureboot.variables
# Read specific Secure Boot variables
# Dump UEFI key databases for analysis
# Check Secure Boot configuration module
Step 3: Analyze EFI System Partition (ESP)
Inspect the ESP for unauthorized or modified boot components:
# Mount ESP (typically the first FAT32 partition, ~100-500MB)mkdir /mnt/esp
mount /dev/sda1 /mnt/esp
# List all files on ESP with timestamps
find /mnt/esp -type f -execls -la {} \;
# Check for BlackLotus indicators - custom directory under ESP:/system32/ls -la /mnt/esp/system32/ 2>/dev/null
# Verify Windows Boot Manager signature
sigcheck -a /mnt/esp/EFI/Microsoft/Boot/bootmgfw.efi
# Hash all EFI binaries for comparison against known-good values
find /mnt/esp -name "*.efi" -execsha256sum {} \;
# Check for unauthorized .efi files outside standard directories
find /mnt/esp -name "*.efi" | grep -v "Microsoft\|Boot\|ubuntu\|grub"# Look for grubx64.efi planted by BlackLotus
find /mnt/esp -name "grubx64.efi" -execsha256sum {} \;
# Examine MeasuredBoot logs for anomalies (Windows)# Logs located at C:\Windows\Logs\MeasuredBoot\
Step 4: Scan Firmware for Known Bootkit Signatures
Analyze the firmware dump for known UEFI malware patterns:
# Extract all firmware modules with UEFIExtract
UEFIExtract firmware_dump.rom all
# Generate firmware module whitelist from vendor baseline
python chipsec_main.py -m tools.uefi.whitelist -a generate,baseline.json,firmware_vendor.rom
# Compare current firmware against whitelist
python chipsec_main.py -m tools.uefi.whitelist -a check,baseline.json,firmware_dump.rom
# Scan firmware with UEFI-specific YARA rules
yara -r uefi_bootkits.yar firmware_dump.rom
# Scan extracted modules individually
find firmware_dump.rom.dump -name "*.efi" -exec yara -r uefi_bootkits.yar {} \;
# Check for modified CORE_DXE module (targeted by MoonBounce, CosmicStrand)# Compare GUID and hash against vendor baseline
Step 5: Detect Secure Boot Bypass Mechanisms
Check for known Secure Boot bypass techniques:
# Check if Secure Boot is enabled
python chipsec_main.py -m common.secureboot.variables
# Verify SMM (System Management Mode) protections
python chipsec_main.py -m common.smm
# Check SMM BIOS write protection
python chipsec_main.py -m common.bios_smi
# On Windows - check boot configuration for bypass indicators
bcdedit /enum firmware
bcdedit /v
# Check for testsigning/nointegritychecks/debug flags
bcdedit | findstr /i "testsigning nointegritychecks debug"# Verify HVCI (Hypervisor-enforced Code Integrity) is not disabled# BlackLotus sets HKLM:\...\DeviceGuard\...\HypervisorEnforcedCodeIntegrity Enabled=0
reg query "HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\HypervisorEnforcedCodeIntegrity" /v Enabled
# Check Secure Boot state via PowerShell# Confirm-SecureBootUEFI returns True if properly enabled
Step 6: Perform Boot Chain Integrity Verification
Verify every component in the boot chain from firmware through kernel:
# Verify firmware integrity against vendor hashsha256sum firmware_dump.rom
# Compare with vendor-published hash# Verify bootloader signatures
sigcheck -a C:\Windows\Boot\EFI\bootmgfw.efi
sigcheck -a C:\Windows\System32\winload.efi
sigcheck -a C:\Windows\System32\ntoskrnl.exe
# Check for unsigned or invalid boot drivers
sigcheck -u -e C:\Windows\System32\drivers\
# Analyze Measured Boot logs for unexpected EFI_Boot_Services_Application entries# BlackLotus components appear as EV_EFI_Boot_Services_Application# Memory forensics for boot-phase artifacts
vol3 -f memory.dmp windows.modules
vol3 -f memory.dmp windows.driverscan
Step 7: Document UEFI Bootkit Analysis Findings
Compile a comprehensive analysis report:
Report should include:
- Firmware version, vendor, and platform identification
- SPI flash protection status (write protect, lock bits, access control)
- Secure Boot configuration and any bypass indicators detected
- UEFI variable anomalies (unauthorized keys, modified db/dbx, MOK enrollment)
- ESP contents inventory with hash verification against known-good baselines
- Firmware module comparison against vendor whitelist (added, modified, removed)
- Known bootkit family attribution with confidence level
- Boot chain integrity verification results for each component
- Remediation steps (reflash, key rotation, hardware replacement)
- MITRE ATT&CK mapping (T1542.001 - System Firmware, T1542.003 - Bootkit)
Key Concepts
Term
Definition
UEFI Bootkit
Malware that persists in UEFI firmware or the boot process, executing before the operating system loads and surviving OS reinstallation
SPI Flash
Serial Peripheral Interface flash memory chip on the motherboard storing UEFI firmware; firmware-level bootkits like LoJax and MoonBounce modify SPI flash contents
EFI System Partition (ESP)
FAT32 partition containing EFI bootloaders and drivers; bootkits like BlackLotus and ESPecter modify files on the ESP for persistence
Secure Boot
UEFI security feature that verifies digital signatures of boot components; can be bypassed via vulnerabilities (CVE-2022-21894) or MOK enrollment
DXE Driver
Driver Execution Environment driver loaded during UEFI boot; firmware implants inject malicious DXE drivers that execute before the OS
Intel platform security assessment framework for analyzing SPI flash, UEFI variables, Secure Boot, and hardware security configurations
HVCI
Hypervisor-enforced Code Integrity, a Windows security feature that bootkits disable to load unsigned kernel drivers
Tools & Systems
chipsec: Intel framework for dumping SPI flash, reading UEFI variables, verifying firmware write protection, and Secure Boot configuration auditing
UEFITool: Open-source UEFI firmware image parser for inspecting firmware volumes, extracting DXE drivers, and comparing module GUIDs
sigcheck: Sysinternals utility for verifying digital signatures of EFI binaries and boot chain components
flashrom: Open-source SPI flash programmer for reading and writing firmware chips on supported platforms
YARA: Pattern matching engine used with UEFI-specific rule sets to detect known bootkit signatures in firmware dumps
Common Scenarios
Scenario: Investigating Persistent Compromise Surviving OS Reinstallation
Context: An enterprise endpoint was reimaged after a confirmed breach, but identical C2 beaconing resumed within hours. The endpoint has UEFI firmware with Secure Boot enabled, and a TPM 2.0 chip. The security team suspects a UEFI-level implant similar to BlackLotus or LoJax.
Approach:
Boot the system from a trusted Linux live USB to avoid executing any compromised OS components
Dump SPI flash firmware using chipsec_util.py spi dump for offline analysis
Mount the ESP and hash all .efi files for comparison against known-good values from identical hardware
Check for the ESP:/system32/ directory (BlackLotus indicator) and unauthorized grubx64.efi
Extract firmware modules with UEFIExtract and compare GUID inventory against vendor baseline
Verify Secure Boot variables -- look for unauthorized MOK enrollment or modified db/dbx
Check SPI flash write protection and lock bits using chipsec modules
Scan firmware dump and extracted modules with UEFI-specific YARA rules
If BlackLotus is suspected, check registry for HVCI disabled and MeasuredBoot logs for anomalous entries
Pitfalls:
Running analysis from the compromised OS (rootkit components hide from live analysis)
Only checking the ESP without examining SPI flash firmware (misses firmware-level implants like LoJax, MoonBounce)
Assuming Secure Boot prevents all bootkits (CVE-2022-21894 and other bypasses exist)
Not preserving the original firmware dump before remediation (critical forensic evidence)
Reflashing firmware without verifying the vendor image is authentic and unmodified
Output Format
UEFI BOOTKIT PERSISTENCE ANALYSIS REPORT
============================================
System: Lenovo ThinkPad X1 Carbon Gen 11
Firmware: N3HET82W (1.54) - Lenovo UEFI BIOS
Platform: Intel 13th Gen (Raptor Lake)
TPM: 2.0 (Infineon SLB 9672)
Secure Boot: ENABLED (BYPASSED via CVE-2022-21894)
Analysis Method: Linux live USB + chipsec + UEFITool
SPI FLASH PROTECTION STATUS
BIOS Write Protection: DISABLED [!]
SPI Flash Lock (FLOCKDN): SET [OK]
SMM BIOS Write Protect: DISABLED [!]
SPI Protected Ranges: Region 0 only (descriptor)
UEFI VARIABLE ANALYSIS
SecureBoot: Enabled (value=1)
SetupMode: Disabled (value=0)
PK: Lenovo Ltd. (legitimate)
KEK: Microsoft + Lenovo (legitimate)
db: MODIFIED - contains unauthorized entry [!]
[!] Unknown certificate: CN=Secure Boot Signing, O=Unknown
[!] Not present in vendor baseline db
MOK: 1 unauthorized key enrolled [!]
[!] MOK enrolled: CN=shim, self-signed, not from distro vendor
ESP PARTITION ANALYSIS
Total EFI binaries: 12
Verified (signed): 9
Modified (hash mismatch): 2 [!]
Unauthorized: 1 [!]
[!] EFI/Microsoft/Boot/bootmgfw.efi - MODIFIED
Expected SHA-256: a3f2c8...
Current SHA-256: 7b1e4d...
Signature: Valid (signed with unauthorized MOK)
[!] EFI/Microsoft/Boot/grubx64.efi - UNAUTHORIZED
SHA-256: e9c1a7...
Not present in vendor baseline
Matches BlackLotus stage-2 loader signature
[!] system32/ directory present on ESP (BlackLotus artifact)
Directory empty (files deleted post-installation)
FIRMWARE MODULE ANALYSIS
Total firmware modules: 312
Vendor baseline modules: 312
Added modules: 0
Modified modules: 0
SPI flash integrity: CLEAN (no firmware-level implant detected)
BOOTKIT ATTRIBUTION
Family: BlackLotus
Confidence: HIGH
Persistence: ESP-based (not SPI flash)
Bypass Method: CVE-2022-21894 (baton drop)
MITRE ATT&CK: T1542.003 (Bootkit), T1553.006 (Code Signing Policy Modification)
INDICATORS OF COMPROMISE
- ESP:/system32/ directory (empty, post-cleanup artifact)
- ESP:/EFI/Microsoft/Boot/grubx64.efi (unauthorized, BlackLotus loader)
- Modified bootmgfw.efi (re-signed with attacker MOK)
- HVCI disabled via registry: DeviceGuard\...\Enabled = 0
- Unauthorized MOK enrollment in UEFI variable store
- MeasuredBoot log shows EV_EFI_Boot_Services_Application for grubx64.efi
REMEDIATION
1. Replace bootmgfw.efi with authentic copy from Windows installation media
2. Delete unauthorized grubx64.efi and system32/ directory from ESP
3. Reset Secure Boot keys to factory defaults (clear MOK, restore PK/KEK/db)
4. Enable BIOS write protection and verify SPI flash lock bits
5. Apply firmware update to latest version (patches CVE-2022-21894)
6. Enable HVCI and verify via Group Policy
7. Reimport only trusted certificates into Secure Boot db
8. Monitor MeasuredBoot logs for anomalous boot component loading
