multica-skill-importing

name	multica-skill-importing
description	Use when a user provides a skill URL, slug, or clear intent to import/install a specific skill into the current Multica workspace. Teaches the workspace import API/CLI path (POST /api/skills/import), the supported URL source families, --on-conflict fail|overwrite|rename|skip behavior and structured import results, additive agent binding vs replace-all, and the reserved SKILL.md supporting-file rule. Do not use it to decide which skill the user needs, and never treat an external local installer like npx skills add as the final Multica install.
user-invocable	false
allowed-tools	Bash(multica *)

Importing skills into Multica

Use this skill when the user already provided a skill URL, slug, or a clear intent to import a specific skill into the current Multica workspace.

Do not use this skill to decide which skill the user needs. If the user only describes a capability and no URL is known, external search may produce candidate URLs, but this import skill starts only once a URL or concrete import target is known.

Every claim below is traced to source in references/skill-importing-source-map.md. When in doubt, read that file.

The invariant

A skill is installed for Multica only when it exists in the current workspace's skill database. The single supported path that puts it there is the workspace import endpoint. It accepts either a hosted URL or an uploaded local archive (.skill / .zip), driven by this CLI:

multica skill import --url <url> --output json              # hosted source
multica skill import --file <path-to.skill> --output json   # local archive

The CLI defaults to --on-conflict fail. A URL import sends:

POST /api/skills/import
Content-Type: application/json
body: { "url": "<url>", "on_conflict": "fail" }

A --file import hits the same route as multipart/form-data with a file part (the .skill / .zip bytes) and an on_conflict field. --url and --file are mutually exclusive; exactly one is required.

Do not finish with npx skills add. That installs into an external/local skill environment, not the Multica workspace DB, so Multica cannot manage or bind it.

Supported URL source families

detectImportSource accepts these hosts (and www. variants). Pass any of these forms to multica skill import --url <url> --output json:

multica skill import --url clawhub.ai/owner/skill --output json
multica skill import --url skills.sh/owner/repo/skill --output json
multica skill import --url github.com/owner/repo --output json
multica skill import --url github.com/owner/repo/tree/main/path/to/skill --output json
multica skill import --url github.com/owner/repo/blob/main/path/to/SKILL.md --output json

• clawhub.ai, skills.sh, github.com are the recognized hosts.
• A GitHub URL may be a bare owner/repo, a /tree/{ref}/... directory, or a /blob/{ref}/.../SKILL.md file.
• A bare ClawHub slug (no host) is accepted and routed to ClawHub.
• Any other host is rejected with a 400 naming the supported sources.

Local archive import (.skill / .zip)

multica skill import --file <path> --output json imports a skill from a local archive instead of a hosted URL. A .skill file is a standard zip — the format Anthropic's skill-creator package_skill produces — and a plain .zip of a skill folder works too. The server:

• accepts the upload as multipart/form-data (a file part plus an optional on_conflict field) on the same POST /api/skills/import route;
• decompresses it and roots on the shallowest SKILL.md, so both a root-level SKILL.md and the nested my-skill/SKILL.md wrapper layout are accepted;
• takes the name/description from SKILL.md frontmatter, falling back to the wrapper directory name and then the uploaded filename;
• carries the supporting files — dropping any SKILL.md, dotfiles, __MACOSX, license files, and binary assets — under the same per-file (1 MiB), per-bundle (8 MiB), and file-count (128) caps as URL imports, and rejects path traversal (zip-slip);
• returns the same structured result envelope and honors the same --on-conflict strategies as URL imports.

The upload itself is capped at 16 MiB (compressed). Any source that is not a local archive still goes through --url.

Direct URL flow

1. When the request contains a concrete URL, the import endpoint can be called directly; search is not required by the API:

multica skill import --url <url> --output json

2. Treat the response as the source of truth. Current CLI imports use the structured import result envelope:

{
  "status": "created|updated|conflict|skipped|failed",
  "reason": "...",
  "skill": { "...": "SkillWithFilesResponse when created/updated" },
  "existing_skill": { "id": "...", "name": "...", "can_overwrite": true }
}

For created / updated, skill is a workspace SkillWithFilesResponse: it embeds the standard SkillResponse and adds the supporting files array. Report the relevant fields:

• status and reason when present.
• skill.id / skill.name / skill.description.
• skill.config.origin (provenance: which source the skill was imported from — set only when the source supplied an origin, so treat it as possibly absent).
• skill.files / files count.
• skill.created_at / skill.updated_at.
• existing_skill.id / existing_skill.name when status is conflict, skipped, or failed due to an existing skill.

Because the response is structured, read these returned fields instead of guessing whether the import succeeded.

3. Agent-skill binding is a separate mutable operation. add preserves existing assignments and appends the new id:

multica agent skills add <agent-id> --skill-ids <skill-id> --output json
multica agent skills list <agent-id> --output json

After the final multica agent skills list <agent-id> --output json, verify the target skill id is present before claiming the skill is available to that agent.

Additive add vs replace-all set

multica agent skills add is additive: the server inserts the assignments without clearing existing ones (AddAgentSkills).

multica agent skills set is replace-all: the server clears every current assignment, then re-adds exactly the ids you pass (SetAgentSkills). set is the replacement path. Passing only one id to set leaves the agent with only that one skill and drops every previous assignment.

Reserved SKILL.md supporting file

A skill's primary content is its SKILL.md. That filename is reserved: the daemon writes the primary content to SKILL.md itself when preparing the execution environment, so a supporting file may not also be named SKILL.md (IsReservedContentPath; the check cleans the path and is case-insensitive, so ./SKILL.md and sub/../SKILL.md are caught too).

Practical effect when importing or creating a skill: if the manifest lists a supporting file named SKILL.md, the server silently drops it — the import still succeeds, but that entry will be absent from the returned files. So if a supporting file you expected is missing, check whether it was named SKILL.md; rename it to a non-reserved path. (The hard 400 rejection — "SKILL.md is reserved for the primary skill content" — only fires on the dedicated single-file endpoint PUT /api/skills/{id}/files, not on import.)

Same-name conflicts: --on-conflict

Default behavior is safe: multica skill import --url <url> is equivalent to --on-conflict fail. If the imported skill name already exists, the command prints a structured conflict result and exits non-zero; no skill is created or updated.

Choose an explicit strategy only when the user asked for it or the intent is clear:

• --on-conflict fail (default): do nothing on conflict; report status: conflict with a reason that suggests overwrite or rename.
• --on-conflict overwrite: update the existing same-name skill in place, but only if the current user is the skill's original creator. This preserves the skill ID, created_by, created_at, and agent-skill bindings; it replaces description, content, provenance config, and supporting files. Non-creators get status: failed.
• --on-conflict rename: create a new skill with an automatic suffix such as -2 / -3; the existing skill is untouched.
• --on-conflict skip: leave the existing skill untouched and report status: skipped.

Concrete examples:

# Safe default. Fails with status=conflict if review-helper already exists.
multica skill import --url https://skills.sh/acme/repo/review-helper --output json

# Replace the existing same-name skill, preserving its ID and agent bindings.
multica skill import --url https://skills.sh/acme/repo/review-helper --on-conflict overwrite --output json

# Keep the existing skill and import a copy such as review-helper-2.
multica skill import --url https://skills.sh/acme/repo/review-helper --on-conflict rename --output json

# Batch-friendly behavior: leave the existing skill alone and mark it skipped.
multica skill import --url https://skills.sh/acme/repo/review-helper --on-conflict skip --output json

Legacy compatibility: clients that do not send on_conflict keep the old contract. A duplicate import returns 409 and the body carries the existing workspace skill identity:

{
  "error": "a skill with this name already exists",
  "existing_skill": {
    "id": "<skill-id>",
    "name": "<skill-name>"
  }
}

Current CLI normalizes that legacy shape into status: conflict and exits non-zero for the default fail strategy. Treat existing_skill.id and existing_skill.name as the source of truth, then fetch details if needed:

multica skill get <skill-id> --output json

Older servers may return a 409 whose body is only a string like a skill with this name already exists, with no existing_skill key. Recover by finding the existing workspace skill yourself:

multica skill list --output json
multica skill get <skill-id> --output json

Then report that the skill already exists and include its id / name. Do not retry in a loop, and do not create a second skill under a different name just to dodge the conflict.

Incorrect → correct

Incorrect (bypasses Multica):

npx skills add https://skills.sh/owner/repo/skill

The skill may exist locally, but Multica cannot manage it as a workspace skill.

Incorrect agent binding for a normal add (replaces every existing assignment):

Using set with only the new skill id wipes the agent's other skills. For an add, use add.

Correct import:

multica skill import --url https://skills.sh/owner/repo/skill --output json

Agent binding after import, when the caller intentionally wants to mutate that agent's skill assignments:

multica agent skills add <agent-id> --skill-ids <skill-id> --output json
multica agent skills list <agent-id> --output json

References

• references/skill-importing-source-map.md — every behavior above mapped to file:line in server/, plus the verification command to re-derive the lines.