learning-rate-matters-vanilla

name	learning-rate-matters-vanilla
description	Configure optimal learning rates for LoRA fine-tuning of LLMs. Generates hyperparameter search configs, training scripts, and analysis code that ensure vanilla LoRA matches or beats fancy variants. Triggers: 'fine-tune with LoRA', 'set up LoRA training', 'compare LoRA variants', 'optimize LoRA hyperparameters', 'learning rate sweep for LoRA', 'LoRA fine-tuning config'

Learning Rate Matters: Optimal LoRA Fine-Tuning Configuration

This skill enables Claude to configure, generate, and debug LoRA fine-tuning pipelines with properly tuned learning rates. Based on the finding that vanilla LoRA matches the performance of PiSSA, DoRA, MiLoRA, and Init[AB] within 1-2% when learning rates are correctly swept, this skill produces hyperparameter search configurations, training scripts, and analysis tooling that avoid the single-configuration trap that plagues most LoRA setups.

When to Use

• When the user asks to fine-tune an LLM with LoRA and needs a training configuration
• When the user is choosing between LoRA variants (PiSSA, DoRA, MiLoRA, etc.) and wants guidance
• When a LoRA fine-tuning run produces poor results and the user suspects hyperparameter issues
• When the user needs to set up a learning rate sweep or hyperparameter search for LoRA
• When the user asks to generate a training script for math reasoning or code generation tasks
• When the user wants to benchmark multiple LoRA methods fairly against each other
• When the user is debugging a LoRA training run that diverges or underperforms

Key Technique

The core insight is that reported gains from LoRA variants (PiSSA, DoRA, MiLoRA, Init[AB]) over vanilla LoRA are largely artifacts of fixed hyperparameter settings. Different LoRA initialization strategies create different loss landscape curvatures at initialization -- measured by the maximum Hessian eigenvalue (lambda_max). PiSSA, which initializes trainable parameters along principal singular directions, produces significantly higher curvature and therefore requires a lower optimal learning rate. When each method gets its own properly tuned learning rate, performance gaps collapse to within 1-2%.

The practical rule is: optimal learning rate is inversely proportional to the largest Hessian eigenvalue at initialization (eta* ~ 1/lambda_max). Since vanilla LoRA (zero-initialized B, random A) has lower curvature than SVD-based methods like PiSSA, it tolerates higher learning rates. This means a single fixed learning rate (e.g., 2e-5) will favor whichever method's curvature happens to match that rate, creating the illusion of methodological superiority.

The recommended search strategy uses a logarithmic grid of 12-16 learning rates spanning 1e-5 to 6e-3, with batch sizes of {16, 64, 128} and ranks in {8, 16, 32, 64, 128}. Learning rate is the most critical axis: tuning only batch size with a fixed LR yielded 11.16% accuracy on one benchmark, while tuning LR alone yielded 20.5-21.0%. The optimal LR also scales proportionally with batch size, following the classical linear scaling rule from SGD theory.

Step-by-Step Workflow

1. Identify the task and model scale. Determine whether the fine-tuning target is math reasoning, code generation, instruction following, or another task. Note the base model (e.g., Llama-2-7B, Qwen3-0.6B, Gemma-3-1B) since optimal LR ranges shift with model size.

2. Default to vanilla LoRA. Unless the user has a specific reason to use a variant, configure standard LoRA with zero-initialized B and Kaiming-initialized A. Set alpha = rank (scaling factor gamma_r = 1). This is the simplest setup and matches variant performance when tuned.

3. Generate the logarithmic learning rate grid. Produce 12-16 values spanning three orders of magnitude. Use the geometric progression: for each order (e.g., 1e-4), generate values at multipliers [1.12, 2.0, 3.56, 6.32]. A typical grid for vanilla LoRA: [1.1e-5, 2e-5, 3.6e-5, 6.3e-5, 1.1e-4, 2e-4, 3.6e-4, 6.3e-4, 1.1e-3, 2e-3, 3.6e-3, 6.3e-3].

4. Set the rank search space. For initial experiments, use rank 64 or 128 as the default. If the user needs to explore rank sensitivity, sweep {8, 16, 32, 64, 128, 256}. Note rank-dependent behaviors: DoRA shows up to 1.1% gains at r=8 but the advantage vanishes at higher ranks; PiSSA underperforms at r<=32 but catches up at higher ranks.

5. Configure batch size as a secondary axis. Test {16, 64, 128} if compute allows. When scaling batch size by factor k, scale learning rate by the same factor k (linear scaling rule). If compute is limited, fix batch size and sweep only LR -- this captures most of the performance variance.

6. Generate the training script with sweep logic. Output a script using HuggingFace PEFT + Transformers (or the user's preferred framework) with either a grid search loop, Optuna integration, or Weights & Biases sweep config. Include early stopping and validation checkpointing.

7. Set fixed hyperparameters. Keep these constant across the sweep: LoRA target modules (typically q_proj, v_proj, or all linear layers), alpha = rank, number of epochs, warmup ratio, weight decay, and LR scheduler (cosine is standard). These are secondary to LR and should not vary during the primary sweep.

8. Run the sweep and collect results. Generate analysis code that plots accuracy vs. learning rate for each configuration, identifies the peak LR, and reports the performance envelope (best accuracy +/- std across seeds).

9. Diagnose failures. If runs diverge at high LR, the Hessian curvature is too high for that rate -- lower the LR. If performance plateaus at low LR, the model is underfitting -- raise the LR. If a LoRA variant underperforms vanilla LoRA, check whether it was given the same LR (it likely needs a different one).

Concrete Examples

Example 1: Generate a LoRA fine-tuning config for code generation

User: "Set up LoRA fine-tuning for Llama-2-7B on Python code generation data"

Approach:

1. Configure vanilla LoRA with rank=64, alpha=64, targeting all linear layers
2. Generate a learning rate sweep from 1.1e-5 to 6.3e-3
3. Produce a PEFT training script with the sweep

Output:

from peft import LoraConfig, get_peft_model, TaskType
from transformers import AutoModelForCausalLM, TrainingArguments
import numpy as np

# --- Learning Rate Grid (log-scale, 12 points) ---
lr_grid = []
for exp in range(-5, -2):
    for mult in [1.1247, 2.0, 3.5566, 6.3246]:
        lr_grid.append(round(mult * 10**exp, 8))

# --- LoRA Config (vanilla, zero-init B, Kaiming A) ---
lora_config = LoraConfig(
    task_type=TaskType.CAUSAL_LM,
    r=64,
    lora_alpha=64,          # alpha = rank => gamma_r = 1
    lora_dropout=0.05,
    target_modules=["q_proj", "k_proj", "v_proj", "o_proj",
                     "gate_proj", "up_proj", "down_proj"],
    init_lora_weights=True,  # default: A ~ Kaiming, B = 0
)

model = AutoModelForCausalLM.from_pretrained(
    "meta-llama/Llama-2-7b-hf", torch_dtype="bfloat16"
)
model = get_peft_model(model, lora_config)

# --- Sweep over learning rates ---
for lr in lr_grid:
    training_args = TrainingArguments(
        output_dir=f"./output/lr_{lr:.2e}",
        learning_rate=lr,
        per_device_train_batch_size=16,
        num_train_epochs=,
        lr_scheduler_type=,
        warmup_ratio=,
        weight_decay=,
        bf16=,
        evaluation_strategy=,
        eval_steps=,
        save_strategy=,
        save_steps=,
        load_best_model_at_end=,
        logging_steps=,
    )
    

Example 2: Debug underperforming PiSSA vs LoRA comparison

User: "I'm comparing PiSSA to LoRA on math tasks and PiSSA is doing worse. Both use LR=2e-4."

Approach:

1. Identify the problem: PiSSA has higher Hessian curvature at initialization, so its optimal LR is lower than vanilla LoRA's
2. Recommend a lower LR range for PiSSA (roughly 0.3x-0.5x of the LoRA-optimal LR)
3. Generate a targeted sweep for PiSSA

Output:

The issue is that PiSSA initializes along principal singular vectors,
creating higher loss curvature (larger Hessian eigenvalues). This means
PiSSA needs a LOWER learning rate than vanilla LoRA.

If LoRA works well at 2e-4, try PiSSA at:
  - 3.6e-5, 6.3e-5, 1.1e-4 (roughly 0.2x to 0.5x of LoRA's optimal)

To confirm, run both methods across the full LR grid and compare
each at its own best LR, not at a shared LR.

Example 3: Set up a W&B sweep for comparing LoRA methods

User: "Create a Weights & Biases sweep config to compare vanilla LoRA, DoRA, and PiSSA"

Approach:

1. Define a W&B sweep YAML with method, LR grid, and LoRA variant as categorical
2. Include the log-scale LR distribution and rank options
3. Set the metric to maximize

Output:

# wandb_sweep.yaml
program: train_lora.py
method: grid
metric:
  name: eval/accuracy
  goal: maximize
parameters:
  lora_method:
    values: ["vanilla", "dora", "pissa"]
  learning_rate:
    values: [1.1e-5, 2.0e-5, 3.6e-5, 6.3e-5,
             1.1e-4, 2.0e-4, 3.6e-4, 6.3e-4,
             1.1e-3, 2.0e-3, 3.6e-3, 6.3e-3]
  rank:
    values: [16, 64, 128]
  batch_size:
    values: [16, 64]
  lora_alpha:
    value: -1  # sentinel: set alpha = rank in train script
  num_epochs:
    value: 3
  warmup_ratio:
    value: 0.03

Best Practices

Do:

• Always sweep learning rate on a log scale spanning at least 2-3 orders of magnitude. A single LR is the most common source of misleading LoRA comparisons.
• Set lora_alpha = rank (gamma_r = 1) to decouple the scaling factor from the rank, making LR sweeps more interpretable.
• Scale learning rate proportionally when changing batch size (double the batch, double the LR).
• Compare LoRA variants at each method's own best LR, never at a shared fixed LR.

Avoid:

• Avoid adopting a LoRA variant (PiSSA, DoRA, etc.) solely based on a published comparison that used a single learning rate. The reported gains likely reflect LR mismatch, not method superiority.
• Avoid sweeping batch size while holding learning rate fixed -- this captures very little of the performance variance (11% vs 21% accuracy in the paper's worst case).
• Avoid using very high ranks (r > 128) with PiSSA at the same LR that works for vanilla LoRA. PiSSA's curvature increases with rank, requiring even lower LRs.
• Avoid concluding a method is better based on < 2% improvement -- this is within noise across seeds and LR sensitivity.

Error Handling

Symptom	Likely Cause	Fix
Training loss diverges (NaN/Inf)	Learning rate too high for this method's curvature	Reduce LR by 3-5x; PiSSA especially prone
Loss plateaus, no improvement	Learning rate too low	Increase LR by 3-5x; check if LR scheduler is decaying too aggressively
LoRA variant worse than vanilla	Using vanilla LoRA's optimal LR for the variant	Sweep LR independently per method
Performance degrades at high rank	Overfitting or LR-rank mismatch	Reduce rank, or lower LR (curvature grows with rank for SVD-init methods)
Results vary wildly across seeds	Operating near a steep region of the LR-performance curve	Use 3+ seeds at the current LR; shift to a flatter region of the curve

Limitations

• The paper's results cover math reasoning (GSM8K, MATH) and code generation (HumanEval, MBPP). The equivalence of LoRA variants may not hold identically for instruction tuning, RLHF, or domain-specific tasks with very different loss landscapes.
• Models tested go up to 7B parameters. At much larger scales (70B+), the relative curvature properties and optimal LR ranges may shift.
• The sweep budget (12-16 LRs x 3 batch sizes x multiple ranks) requires significant compute. For single-run constraints, vanilla LoRA at LR ~2e-4 to 3.6e-4 with rank 64 is a reasonable starting point for 1B-7B models.
• The Hessian analysis is performed at initialization. Training dynamics could introduce method-specific advantages later in training that the initial curvature analysis does not capture.
• Alpha is fixed at alpha = rank throughout. Alternative alpha-rank relationships (e.g., alpha = 16 regardless of rank, as some practitioners use) were not studied.

Reference

Paper: Learning Rate Matters: Vanilla LoRA May Suffice for LLM Fine-tuning (Lee et al., 2026) Key takeaway: Look at Table 1 and Figure 1 for the LR-performance curves showing how all methods converge to within 1-2% at their respective optimal LRs, and Section 4.2 for the Hessian eigenvalue analysis explaining why different methods need different LRs.