hami-dra-kind-testing

name	hami-dra-kind-testing
description	Use when testing the HAMi-Core DRA Driver on a kind cluster — covers cluster setup, Helm-based driver install, ResourceClaim configuration, pod scheduling, HAMi-Core memory limit verification via nvidia-smi, and teardown.

HAMi-Core DRA Driver — kind Cluster Testing

Overview

This skill guides the complete test cycle of the HAMi-Core DRA Driver on a local kind cluster: from building the image through verifying that Consumable Capacity (GPU core/memory limits) is enforced inside a container.

The driver (RBAC + DaemonSet + DeviceClass) is installed via the Helm chart at chart/hami-dra-driver/. The test workloads (Namespace, ResourceClaims, ResourceClaimTemplate, Pods) are applied from demo/yaml/.

The key end-to-end proof is nvidia-smi inside a test pod reporting the capped memory (e.g. 4096 MiB) rather than the full physical GPU memory. This works because HAMi-Core's libvgpu.so is preloaded into the container and intercepts NVML calls.

---

Pre-flight Checks

Run this before touching the cluster. Every line must return success.

# 1. NVIDIA driver + CUDA
nvidia-smi

# 2. NVIDIA Container Toolkit
nvidia-ctk --version

# 3. accept-nvidia-visible-devices-as-volume-mounts = true
grep -q "accept-nvidia-visible-devices-as-volume-mounts\s*=\s*true" \
  /etc/nvidia-container-runtime/config.toml && echo "[OK] volume-mounts config"
# Fix: sudo nvidia-ctk config --in-place \
#        --set accept-nvidia-visible-devices-as-volume-mounts=true

# 4. NVIDIA runtime set as default container runtime
docker info 2>/dev/null | grep -i "default runtime" | grep -qi nvidia \
  && echo "[OK] nvidia is default runtime"
# Fix: sudo nvidia-ctk runtime configure --runtime=docker --set-as-default
#      sudo systemctl restart docker

# 5. kind, kubectl, helm
kind version
kubectl version --client
helm version

# 6. Driver image exists locally
docker images --filter reference=projecthami/k8s-dra-driver:v0.1.0 -q | grep -q . \
  && echo "[OK] driver image found"

# 7. Test image exists locally (kind clusters may not have internet)
docker images --filter reference=ubuntu:24.04 -q | grep -q . \
  && echo "[OK] test image found"
# Fix if missing: docker pull ubuntu:24.04

All checks must pass. The most common failure is #3 or #4 after a toolkit upgrade.

---

Key Environment Variables

All variables are sourced from demo/clusters/kind/scripts/common.sh and can be overridden by prefixing the script call.

Variable	Default	Purpose
KIND_K8S_TAG	v1.34.0	Kubernetes version (must be ≥ 1.34 for Consumable Capacity)
KIND_CLUSTER_NAME	k8s-dra-driver-cluster	Name of the kind cluster
DRIVER_IMAGE	projecthami/k8s-dra-driver:v0.1.0	Driver image to load into nodes
KIND_CLUSTER_CONFIG_PATH	demo/clusters/kind/scripts/kind-cluster-config.yaml	kind cluster config file

Override example:

KIND_K8S_TAG=v1.35.0 ./demo/clusters/kind/create-cluster.sh

---

Stage 1 — Build the Driver Image

# From repo root
make image

# Verify
docker images | grep k8s-dra-driver
# Expected: projecthami/k8s-dra-driver   v0.1.0   ...

Skip this stage if you already have the image pulled from a registry. The cluster creation script will auto-load it.

---

Stage 2 — Create the kind Cluster

Check for an existing cluster with the same name first and delete it if present:

if kind get clusters | grep -q "^k8s-dra-driver-cluster$"; then
  echo "Existing cluster found — deleting before recreating..."
  ./demo/clusters/kind/delete-cluster.sh
fi

Create the cluster:

./demo/clusters/kind/create-cluster.sh

This script:

• Creates a kind cluster using demo/clusters/kind/scripts/kind-cluster-config.yaml
• Enables required Kubernetes feature gates: DynamicResourceAllocation, DRAConsumableCapacity, DRAPartitionableDevices, DRAPrioritizedList, DRAAdminAccess, DRAResourceClaimDeviceStatus
• Enables CDI in containerd
• Auto-loads DRIVER_IMAGE into cluster nodes if the image exists locally

Pre-load the test workload image (the worker node usually does not have internet access):

kind load docker-image --name k8s-dra-driver-cluster ubuntu:24.04

Verify:

kubectl get nodes
# Expected: control-plane + worker node, both Ready

---

Stage 3 — Install the HAMi DRA Driver (Helm)

This skill tests the HAMi-Core feature only. Before installing, ensure HAMiCoreSupport is the active feature gate. HAMiCoreSupport is mutually exclusive with TimeSlicingSettings, MPSSupport, PassthroughSupport, and DynamicMIG — all of these must be disabled (they are by default). When featureGates is left empty in values.yaml, HAMiCoreSupport=true is used implicitly because it is the default-enabled gate.

Install from the local chart into the hami-dra-driver namespace:

helm install hami-dra-driver ./chart/hami-dra-driver \
  --namespace hami-dra-driver \
  --create-namespace \
  --set gpuResourcesEnabledOverride=true

What the chart installs:

• ServiceAccount + ClusterRole + ClusterRoleBinding + Role + RoleBinding (templates/rbac-kubeletplugin.yaml.yaml)
• DaemonSet for the kubelet-plugin (templates/daemonset.yaml)
• DeviceClass hami-core-gpu.project-hami.io (templates/deviceclass-hami-gpu.yaml)

Wait for the driver pod to be ready:

kubectl -n hami-dra-driver rollout status daemonset/hami-dra-driver-kubelet-plugin --timeout=120s

Verify ResourceSlices are published (confirms HAMiCoreSupport is active):

kubectl get resourceslices -o wide
# Expected: one ResourceSlice per GPU with
#           DRIVER = hami-core-gpu.project-hami.io

If DRIVER shows gpu.nvidia.com instead, the HAMiCoreSupport feature gate is disabled.
Check: kubectl -n hami-dra-driver logs -l app.kubernetes.io/component=kubelet-plugin | grep "Using driver name"

Note: The chart's validation.yaml enforces:

• You cannot deploy into the default namespace unless allowDefaultNamespace=true.
• The namespace key in values.yaml is deprecated and will fail rendering.
• gpuResourcesEnabledOverride=true is required because resources.gpus.enabled=true by default.

---

Stage 4 — Apply Test Workloads

The Helm chart installs the driver and DeviceClass.
Test workloads (namespace, ResourceClaims, ResourceClaimTemplate) are applied separately:

kubectl apply -f demo/yaml/setup.yaml

This creates:

Object	Name	Details
Namespace	test-dra	Namespace for all test workloads
ResourceClaim	single-gpu-0	1 device — 30 cores, 4Gi memory
ResourceClaim	double-gpu-0	2 devices — 30 cores/4Gi + 60 cores/8Gi
ResourceClaimTemplate	single-gpu-tpl	Template for 30 cores, 4Gi memory

The DeviceClass is already created by the Helm chart. setup.yaml also declares it, so applying it is a no-op update. If you prefer to skip it, edit setup.yaml and remove the DeviceClass block.

---

Stage 5 — Create Test Pods and Verify

Three pod manifests are available:

File	Pod name	Claim	Description
demo/yaml/pod-0.yaml	pod-0	single-gpu-0	Single GPU, pre-created claim
demo/yaml/pod-1.yaml	pod-1	double-gpu-0	Two GPUs in one claim
demo/yaml/pod-tpl-0.yaml	pod-tpl-1	single-gpu-tpl	Single GPU via ResourceClaimTemplate

kubectl create -f demo/yaml/pod-0.yaml

Wait for the pod to become Ready:

kubectl -n test-dra wait --for=condition=Ready pod/pod-0 --timeout=120s

Verify HAMi-Core env vars are injected (cores + memory limits):

kubectl -n test-dra exec pod-0 -- \
  env | grep -E "CUDA_DEVICE_SM_LIMIT|CUDA_DEVICE_MEMORY_LIMIT|CUDA_DEVICE_MEMORY_SHARED_CACHE"
# Expected:
#   CUDA_DEVICE_SM_LIMIT_0=30
#   CUDA_DEVICE_MEMORY_LIMIT_0=4096m
#   CUDA_DEVICE_MEMORY_SHARED_CACHE=...

Verify memory cap via nvidia-smi (strongest end-to-end proof):

libvgpu.so intercepts NVML calls inside the container, so nvidia-smi reports the capped memory — not the full physical GPU memory.

kubectl -n test-dra exec pod-0 -- \
  nvidia-smi --query-gpu=memory.total --format=csv,noheader,nounits
# Expected: 4096
# (matches the 4Gi = 4096 MiB requested in single-gpu-0 ResourceClaim)

Check consumed capacity is recorded in claim status:

kubectl -n test-dra get resourceclaim single-gpu-0 \
  -o jsonpath='{.status.allocation}' | python3 -m json.tool 2>/dev/null

---

Troubleshooting

Symptom	Likely cause	Fix
helm install fails with "Running in the 'default' namespace is not recommended"	Missing --namespace	Add --namespace hami-dra-driver --create-namespace
helm install fails with gpuResourcesEnabledOverride guard	resources.gpus.enabled=true without override	Add --set gpuResourcesEnabledOverride=true
Pod stuck Pending, event: no devices available	Driver pod not Running or ResourceSlice not published	kubectl -n hami-dra-driver logs -l app.kubernetes.io/component=kubelet-plugin
ResourceSlice DRIVER is gpu.nvidia.com not hami-core-gpu.project-hami.io	HAMiCoreSupport feature gate disabled	Check driver logs for Using driver name: line; reinstall with --set featureGates.HAMiCoreSupport=true
Pod status ImagePullBackOff for ubuntu:24.04	kind worker node can't reach Docker Hub	Pre-load: kind load docker-image --name k8s-dra-driver-cluster ubuntu:24.04
Pod status ErrImagePull / DeadlineExceeded	No outbound internet from kind nodes	Ensure both driver image and ubuntu:24.04 are loaded into kind before creating pods
CUDA_DEVICE_SM_LIMIT not in pod env	libvgpu.so not mounted — init script failed	kubectl -n hami-dra-driver describe pod <driver-pod> — check postStart events and hostPath /usr/local/vgpu
nvidia-smi shows full GPU memory (not capped)	ld.so.preload not injected or wrong VGPU_INIT_PATH	Verify .Values.driver.vgpuInitPath mount and libvgpu.so exists at that path on the node
kind cluster creation fails on image pull

---

Stage 6 — Cleanup

Ask the user whether to delete the cluster before proceeding:

The test is complete. Do you want to delete the kind cluster "${KIND_CLUSTER_NAME}"?
  y) Delete cluster (full teardown)
  n) Keep cluster (useful for further debugging)

Always clean up the driver and test workloads regardless of the answer:

# Always: delete test pods and workloads
kubectl delete -f demo/yaml/pod-0.yaml --ignore-not-found

# Always: delete DeviceClass, ResourceClaims, test namespace
kubectl delete -f demo/yaml/setup.yaml --ignore-not-found

# Always: uninstall the driver via Helm
helm uninstall hami-dra-driver --namespace hami-dra-driver

# Optional: delete the namespace if Helm left it behind
kubectl delete namespace hami-dra-driver --ignore-not-found

Only if the user confirms cluster deletion:

./demo/clusters/kind/delete-cluster.sh