execution-model

name	execution-model
description	Trade execution modeling (backtest only) — slippage formulas (linear / square-root impact), VWAP/TWAP execution logic, market-impact cost estimation, and execution-assumption configuration.
category	strategy

Trade Execution Modeling

Overview

Provide more realistic execution assumptions for backtests, including slippage models, market-impact estimation, and execution-algorithm principles. This skill is for backtest simulation only and does not involve live order execution.

Config-based slippage: The backtest engine supports config.json → slippage (decimal, e.g. 0.001 = 0.1%) and slippage_mode ("fixed" for constant-rate or "volume" for notional-tiered: <¥50万→0.3%, ¥50~500万→0.15%, >¥500万→0.05%). This applies engine-level slippage without modifying signal_engine.py. The models below are for advanced custom implementations.

Slippage Models

Why Slippage Models Are Needed

Idealized backtest: filled at the close, zero slippage
Real world:
1. The order book has a bid-ask spread
2. Large orders push prices (market impact)
3. Execution is delayed (there is latency from signal to fill)

No slippage model -> overly optimistic backtest -> losses in live trading

1. Fixed Slippage Model

def fixed_slippage(price: float, direction: int, bps: float = 5.0) -> float:
    """
    Args:
        price: Original price
        direction: 1=buy, -1=sell
        bps: Slippage in basis points (1bp = 0.01%), default 5bp
    Returns:
        Execution price after slippage
    """
    slippage = price * bps / 10000
    return price + direction * slippage

Reference fixed-slippage assumptions by market:

Market	Instrument	Suggested Slippage (bps)	Notes
China A-share large cap	CSI 300 constituents	3-5	Good liquidity
China A-share small cap	CSI 1000 constituents	5-10	Average liquidity
China micro-cap	market cap < 5 billion RMB	10-30	Poor liquidity
US large cap	AAPL / MSFT	1-3	Excellent liquidity
Hong Kong stocks	Hang Seng constituents	5-10	Less liquid than A / US
BTC spot	BTC-USDT	2-5	Good OKX liquidity
ETH spot	ETH-USDT	3-8	Slightly worse than BTC
Small altcoins	other -USDT pairs	10-50	Liquidity varies widely

2. Linear Impact Model

def linear_impact(price: float, direction: int,
                  volume_traded: float, adv: float,
                  impact_coeff: float = 0.1) -> float:
    """
    Linear market impact: impact ∝ traded volume / ADV

    Args:
        price: Original price
        direction: 1=buy, -1=sell
        volume_traded: Trade size (shares or notional)
        adv: Average Daily Volume
        impact_coeff: Impact coefficient, usually 0.05-0.2
    Returns:
        Execution price after impact
    """
    participation_rate = volume_traded / adv
    impact = impact_coeff * participation_rate
    return price * (1 + direction * impact)

Reference impact coefficients:

Market	impact_coeff	Notes
China A-share large cap	0.05-0.10	10% daily price-limit system
China A-share small cap	0.10-0.20	Liquidity premium
US equities	0.03-0.08	Market-maker buffering
Crypto	0.05-0.15	24h trading is dispersed

3. Square-Root Impact Model (Almgren-Chriss)

import numpy as np

def sqrt_impact(price: float, direction: int,
                volume_traded: float, adv: float,
                volatility: float, eta: float = 0.5) -> float:
    """
    Square-root market impact (more accepted in academia):
    impact = η × σ × sqrt(V/ADV)

    Args:
        price: Original price
        direction: 1=buy, -1=sell
        volume_traded: Trade size
        adv: Average daily volume
        volatility: Daily volatility (standard deviation)
        eta: Impact elasticity coefficient, usually 0.3-0.8
    Returns:
        Execution price after impact
    """
    participation = volume_traded / adv
    impact = eta * volatility * np.sqrt(participation)
    return price * (1 + direction * impact)

Advantages of the square-root model:

• Strongest empirical support (standard in financial literature)
• Marginal impact declines for larger orders (intuitive)
• Parameters can be estimated from historical data

Slippage Model Selection Decision Tree

Backtest capital vs instrument ADV:
├── Capital < 0.5% of ADV -> fixed slippage (5bps) is enough
├── Capital 0.5-5% -> linear impact model
└── Capital > 5% -> square-root impact model (required)

Execution Algorithm Principles

VWAP (Volume Weighted Average Price)

Goal: execute at the day's volume-weighted average price

VWAP = Σ(Price_i × Volume_i) / Σ(Volume_i)

Execution logic:
1. Forecast the intraday volume profile (typically U-shaped)
2. Split the order according to the predicted profile
3. Execute proportionally in each time slice

Typical China A-share VWAP volume profile (U-shaped):
09:30-10:00  15%  (active open)
10:00-11:30  25%  (normal morning session)
13:00-14:00  15%  (weak afternoon session)
14:00-14:30  15%  (afternoon recovery)
14:30-15:00  30%  (active close)

VWAP in backtests:
- Daily backtest: use the VWAP field directly as the fill price
- Minute backtest: simulate VWAP order slicing

TWAP (Time Weighted Average Price)

Goal: execute evenly over a specified time window

TWAP = simple time-sliced execution

Execution logic:
1. Define an execution window (for example 09:30-11:30)
2. Divide it into N time buckets
3. Execute total_size / N in each bucket

Pros and cons:
+ Simple, no need to forecast volume
- Easier to cause impact during low-volume periods
- Less adaptive than VWAP

Simulating Execution Delay in Backtests

def delayed_execution(signal_series: pd.Series, delay_bars: int = 1) -> pd.Series:
    """
    Simulate the delay from signal generation to execution

    Args:
        signal_series: Original signal
        delay_bars: Number of bars to delay, default 1 (T+1 execution)
    Returns:
        Delayed signal

    China A-shares: delay_bars=1 (T+1 rule)
    Crypto: delay_bars=0 or 1
    """
    return signal_series.shift(delay_bars)

Integrated Transaction-Cost Model

Total Cost Breakdown

Total trading cost = explicit cost + implicit cost

Explicit cost:
- Commission: China A-shares 2-3 bps, crypto 0.02-0.1%
- Stamp duty (China A-share sell side): 0.05% (sell orders only)
- Transfer fee: negligible

Implicit cost:
- Bid-ask spread: 0.5-5bps
- Market impact: depends on trade size and liquidity
- Opportunity cost: loss from not filling at the best price

Reference Trading Costs by Market

Cost Item	China A-shares	Hong Kong	US	Crypto (OKX)
Commission (one way)	0.025%	0.05%	0 (zero commission)	0.08% (maker)
Stamp duty	0.05% (sell)	0.1% (both sides)	0	0
Bid-ask spread	0.03-0.1%	0.05-0.2%	0.01-0.05%	0.01-0.05%
Total one-way	~0.1%	~0.2%	~0.03%	~0.1%
Total round-trip	~0.2%	~0.4%	~0.06%	~0.2%

Cost Settings in Backtests

{
  "commission": 0.001,
  "comment": "0.1% one-way commission, already includes stamp duty and spread"
}

Recommendations:

• China A-shares: commission = 0.001 (conservative, includes all costs)
• Crypto: commission = 0.001 (including slippage)
• Hong Kong / US equities: commission = 0.001-0.002

Backtest Execution Assumptions

Relevant config.json Settings

{
  "commission": 0.001,
  "engine": "daily",
  "interval": "1D"
}

Advanced Execution Assumptions (implemented in signal_engine.py)

class SignalEngine:
    def __init__(self):
        # Execution assumption parameters
        self.execution_delay = 1       # T+1 delay
        self.slippage_bps = 5          # Fixed 5bps slippage
        self.max_participation = 0.05  # Maximum participation rate 5%

    def generate(self, data_map):
        for code, df in data_map.items():
            # 1. Generate raw signal
            raw_signal = self._compute_signal(df)

            # 2. Apply execution delay
            delayed_signal = raw_signal.shift(self.execution_delay)

            # 3. Apply volume filter (do not trade when liquidity is too low)
            volume_ok = df['volume'] > df['volume'].rolling(20).mean() * 0.3
            delayed_signal[~volume_ok] = 0

            signals[code] = delayed_signal

Analysis Framework

Evaluate the Impact of Transaction Costs

Step 1: Estimate annual turnover
  Annual turnover = annual trade count × 2 (buy + sell) / number of positions

Step 2: Compute annual cost drag
  Annual cost = annual turnover × total one-way cost

Step 3: Evaluate the impact on returns
  Net return = gross return - annual cost

Example:
  Annual turnover = 12 (monthly rebalance)
  One-way cost = 0.1%
  Annual cost = 12 × 0.1% = 1.2%
  If annualized return is only 5% -> costs eat 24% of returns!

Sensitivity Analysis for Execution Assumptions

### Backtest Results Under Different Slippage Assumptions

| Slippage (bps) | Annual Return | Sharpe | Max Drawdown |
|-----------|---------|--------|---------|
| 0 (ideal) | 15.2% | 1.35 | -18.5% |
| 3 | 13.8% | 1.22 | -19.0% |
| 5 | 12.9% | 1.15 | -19.2% |
| 10 | 11.1% | 0.98 | -19.8% |
| 20 | 7.5% | 0.65 | -20.5% |

Conclusion: the strategy still has meaningful profitability under 10bps slippage

Output Format

## Execution Cost Analysis

### Strategy Trading Characteristics
| Metric | Value |
|------|-----|
| Average annual trade count | 48 |
| Annual turnover | 4.8x |
| Average holding days | 25 |
| Average order size | ¥50,000 |

### Cost Estimate
| Cost Item | Per Trade | Annualized |
|--------|------|------|
| Commission | 0.025% | 0.24% |
| Stamp duty | 0.025% | 0.12% |
| Estimated slippage | 0.03% | 0.29% |
| **Total** | **0.08%** | **0.65%** |

### Cost Impact
- Gross return: 12.5%
- Net return: 11.85%
- Cost drag: -0.65% (5.2% of gross return)
- Conclusion: cost impact is manageable

### Optimization Suggestions
1. Lower turnover (lengthen holding period)
2. Avoid trading during low-liquidity windows
3. Use limit orders instead of market orders

Notes

1. Backtest only: this system does not execute live trades; the execution model is used only to improve backtest realism
2. Conservative assumptions: in backtests, it is better to overestimate transaction costs than to underestimate them
3. China A-share T+1 rule: trades cannot be executed on the same day the signal is generated, so execution must be delayed by 1 day
4. Price-limit constraints: when China A-shares are locked at limit-up / limit-down, no fill is possible; those dates should be skipped in backtests
5. Volume constraints: order size should not exceed 5-10% of the day’s traded volume, otherwise the impact model becomes invalid
6. Backtest overfitting: even with slippage included, the strategy may still overfit; out-of-sample validation matters more
7. commission in config: the default 0.001 (0.1%) is a reasonable all-in cost estimate