tuyaopen-onchip-dma2d

name	tuyaopen/onchip-dma2d
description	On-chip 2D DMA (DMA2D) for TuyaOpen via the tal_dma2d API: hardware pixel-format conversion (e.g. YUV422→RGB565/888) and fast frame blit/memcpy. DMA2D、2D加速、像素格式转换、YUV转RGB、图像搬运、帧拷贝、tal_dma2d、硬件加速。
when_to_use	Use when the user wants hardware-accelerated image work: convert a frame between pixel formats (YUV422 ↔ RGB565/RGB888) or blit/copy a frame buffer fast, e.g. camera→display pipelines.
id	onchip-dma2d
surfaces	["embedded"]
tags	["dma2d","graphics","pixel-format","on-chip","tal_dma2d"]

TuyaOpen On-Chip DMA2D (2D graphics accel)

On-chip — no Kconfig, no TDD

• Platform-provided accelerator. Do NOT write CONFIG_ENABLE_DMA2D. No app_default.config change.
• No board_register_hardware(). Use the tal_dma2d wrapper directly. Single engine (no pins) — record as onchip:dma2d in used-peripherals.json if wanted.
• Frame buffers must satisfy the platform's alignment (often cache-line / 32–64 B) — align your in/out buffers or the engine may reject them.

Platform spec — read, don't hardcode

.tuyaopen/ide/platform.json → peripherals.dma2d.spec.formats lists the supported pixel formats (e.g. TUYA_FRAME_FMT_YUV422 / RGB565 / RGB888). Only convert between formats listed there.

Convert (e.g. YUV422 → RGB565)

#include "tal_api.h"
#include "tal_dma2d.h"

static TAL_DMA2D_HANDLE_T s_dma2d = NULL;

OPERATE_RET app_yuv422_to_rgb565(uint8_t *in_buf, uint8_t *out_buf,
                                 uint16_t w, uint16_t h)
{
    OPERATE_RET rt = OPRT_OK;
    if (s_dma2d == NULL) {
        TUYA_CALL_ERR_RETURN(tal_dma2d_init(&s_dma2d));
    }

    TKL_DMA2D_FRAME_INFO_T in  = {0};
    TKL_DMA2D_FRAME_INFO_T out = {0};

    in.type   = TUYA_FRAME_FMT_YUV422;
    in.width  = w;  in.height = h;  in.pbuf = in_buf;

    out.type  = TUYA_FRAME_FMT_RGB565;
    out.width = w;  out.height = h;  out.pbuf = out_buf;

    /* region to process (clamp to the smaller of in/out) */
    in.width_cp  = w;
    in.height_cp = h;

    TUYA_CALL_ERR_RETURN(tal_dma2d_convert(s_dma2d, &in, &out));
    TUYA_CALL_ERR_RETURN(tal_dma2d_wait_finish(s_dma2d, 100 /* ms */));
    return rt;
}

Fast frame blit (same format, copy a region) → tal_dma2d_memcpy(s_dma2d, &src, &dst) then tal_dma2d_wait_finish.

API Reference

Function	Description
tal_dma2d_init(&handle)	Acquire the DMA2D engine; out: TAL_DMA2D_HANDLE_T
tal_dma2d_convert(h, src, dst)	Pixel-format convert src→dst frame
tal_dma2d_memcpy(h, src, dst)	Fast 2D blit/copy
tal_dma2d_wait_finish(h, timeout_ms)	Block until the op completes
tal_dma2d_deinit(h)	Release the engine

TKL_DMA2D_FRAME_INFO_T: type (TUYA_FRAME_FMT_*), width, height, pbuf, width_cp / height_cp (region to process).

Troubleshooting

Symptom	Likely cause	Fix
init / convert returns error	Buffer not aligned	Align in/out buffers to the platform's requirement (cache line)
Garbled output	Wrong type or unsupported format pair	Use formats from spec.formats; match width/height
Hang / timeout	Forgot tal_dma2d_wait_finish, or too-short timeout	Always wait; raise timeout_ms for large frames

Reference

SDK: src/tal_image/src/tal_image_yuv422_to_rgb.c (tal_dma2d_init + frame setup + tal_dma2d_convert + tal_dma2d_wait_finish).