sast-graphql

name

sast-graphql

description

Detect GraphQL injection vulnerabilities in a codebase using a three-phase approach: recon (confirm GraphQL usage and find unsafe operation document assembly sites), batched verify (trace user input to those sites in parallel subagents, up to 3 candidate sites each), and merge (consolidate batch results). Requires sast/architecture.md (run sast-analysis first). Outputs findings to sast/graphql-results.md. If no GraphQL technology is found in Phase 1, later phases are skipped. Use when asked to find GraphQL injection, unsafe GraphQL document construction, or operation string injection bugs.

GraphQL Injection Detection

You are performing a focused security assessment to find GraphQL injection vulnerabilities. This skill uses a three-phase approach with subagents: recon (confirm GraphQL usage and find every location where a GraphQL operation document is assembled unsafely), batched verify (trace whether user-supplied input reaches those assembly sites, in parallel batches of up to 3 sites each), and merge (consolidate batch results into the final report).

Prerequisites: sast/architecture.md must exist. Run the analysis skill first if it doesn't.

---

What is GraphQL Injection

GraphQL injection occurs when user-controlled data is embedded into the GraphQL document (the query, mutation, or subscription string) rather than passed only through the variables map. The parser then interprets attacker-controlled syntax — new fields, aliases, directives, or fragments — which can bypass intent, reach unauthorized resolvers, or change server-side behavior when that document is executed or forwarded.

The core pattern: unvalidated user input alters the structure or text of the GraphQL operation string passed to execute, graphql, a gateway client, or an HTTP body query field built from string operations.

What GraphQL Injection IS

• Concatenating or interpolating user input into an operation string: `query { user(id: "${id}") { name } }`, "query { user(id: \"" + id + "\") { name } }"
• Building the JSON query field for a downstream GraphQL HTTP request with string concat from request body or params
• Forwarding req.body.query (or similar) into another interpolated template that wraps or extends the operation
• Dynamic gql / graphql-tag template literals where a non-static expression changes document structure (not just a bound variable value inside a static document)
• Server-side code that selects or assembles operation text from user input (including "persisted query" ID → document maps without allowlisting)
• Wrappers around graphql.execute(), graphqlHTTP, Yoga/Apollo request pipeline where the first argument (document/source) is built from variables that could be user-influenced

What GraphQL Injection is NOT

Do not flag these as GraphQL injection:

• SQL injection in resolvers: Resolver code that builds SQL from args — that is SQL injection (sast-sqli), not this skill
• NoSQL / command injection in resolvers: Same — use the appropriate SAST skill
• IDOR via GraphQL arguments: Passing another user's ID in a variables JSON with a static document — authorization flaw, not document injection
• Normal variable binding: Static document with {"query": "query($id: ID!) { user(id: $id) { name } }", "variables": {"id": userInput}} — values are bound as variables; the document structure is fixed (still verify authorization in resolvers)
• Introspection / field suggestion enabled: Information disclosure and hardening topic; only flag as GraphQL injection if the finding is specifically about injecting into the operation string
• Query depth / complexity DoS: Rate limiting and cost analysis — different class

Patterns That Prevent GraphQL Injection

1. Static operation documents with variables

const GET_USER = gql`
  query GetUser($id: ID!) {
    user(id: $id) { name }
  }
`;
// execute(schema, GET_USER, null, context, { id: userId });

2. Server uses standard HTTP handler; client sends document; server parses once

The risk is not the mere presence of req.body.query on the server if the server only parses and executes it as the client's operation — injection in that path is client-side. Flag server-side construction of a new document that incorporates user strings before execute or before forwarding.

3. Persisted queries / allowlisted operation IDs

Document looked up by ID from a server-side registry; client cannot inject arbitrary document text.

4. graphql-js Source with static string; dynamic values only in variableValues

graphql({ schema, source: staticQueryString, variableValues: { id: userId } });

---

Vulnerable vs. Secure Examples

Node.js — dynamic document for downstream API

// VULNERABLE: user input in operation text
app.post('/proxy', async (req, res) => {
  const fragment = req.body.fragment;
  const query = `query { me { ${fragment} } }`;
  const data = await fetch('https://api.internal/graphql', {
    method: 'POST',
    body: JSON.stringify({ query }),
  });
});

// SECURE: static operation, user data only in variables
const PROXY_QUERY = `query ProxyMe { me { id name email } }`;
app.post('/proxy', async (req, res) => {
  const data = await fetch('https://api.internal/graphql', {
    method: 'POST',
    body: JSON.stringify({ query: PROXY_QUERY }),
  });
});

Python — string format into execute

# VULNERABLE
def run_custom_query(user_gql: str):
    document = f"query {{ user {{ {user_gql} }} }}"
    return graphql_sync(schema, document)

# SECURE: validate against allowlist of named operations or use static documents only
ALLOWED = {"id", "name", "email"}
fields = [f for f in requested_fields if f in ALLOWED]
document = "query { user { " + " ".join(ALLOWED.intersection(set(requested_fields))) + " } }"
# Better: fixed FieldNodes, not string building from user input

---

Execution

This skill runs in three phases using subagents. Pass the contents of sast/architecture.md to all subagents as context.

Phase 1: GraphQL Technology Recon and Injection Candidate Sites

Launch a subagent with the following instructions:

Goal: (1) Determine whether this codebase uses GraphQL at all. (2) If it does, find every location where a GraphQL operation document (query/mutation/subscription source string) is built using string concatenation, interpolation, formatting, or dynamic assembly such that a variable could change the document text (not merely variables JSON). Write results to sast/graphql-recon.md.

Context: You will be given the project's architecture summary. Use it for stack, API layout, and BFF/gateway patterns.

Part A — Is GraphQL used?

Search for:

• Dependencies: graphql, @apollo/server, apollo-server-express, @nestjs/graphql, graphql-yoga, @graphql-yoga/node, mercurius, strawberry-graphql, graphene, sangria, gqlgen, async-graphql, juniper, graphql-ruby, Hot Chocolate / GraphQL.Server, etc.
• Schema artifacts: *.graphql, *.graphqls, codegen config (e.g. GraphQL Code Generator)
• Server routes or plugins mounting /graphql or similar

Set the summary to exactly one of:

• GraphQL is used in this codebase. (list libraries and main entry points)
• GraphQL is not used in this codebase.

Part B — Injection candidate sites (only if GraphQL is used)

If GraphQL is not used, omit the "Injection Candidate Sites" section or state there are none. Do not invent candidates.

If GraphQL is used, search for unsafe document construction:

1. String concatenation / interpolation into operation text:
   • `query { ... ${x} ...}`, "mutation { " + userFragment + " }"
   • sprintf, format, % formatting, .format() building query or source arguments

After Phase 1: Gates Before Phase 2

After Phase 1 completes, read sast/graphql-recon.md.

Gate 1 — No GraphQL technology

If the summary states GraphQL is not used (or equivalent: no GraphQL libraries, no schema, no server — clear absence), skip Phases 2 and 3. Write the following to sast/graphql-results.md and stop:

# GraphQL Injection Analysis Results

No GraphQL technology detected in this codebase.

Gate 2 — GraphQL used but no injection candidates

If GraphQL is used but there are zero injection candidate sites (summary reports 0 candidates, or the "Injection Candidate Sites" section states none found / is empty), skip Phases 2 and 3. Write the following to sast/graphql-results.md and stop:

# GraphQL Injection Analysis Results

No vulnerabilities found.

Otherwise proceed to Phase 2.

Phase 2: Trace User Input to Injection Candidate Sites (Batched)

After Phase 1 completes and both gates pass (GraphQL used and at least one candidate site), read sast/graphql-recon.md and split the Injection Candidate Sites into batches of up to 3 sites each (each ### N. section is one site). Launch one subagent per batch in parallel. Each subagent traces taint only for its assigned sites and writes results to its own batch file.

Batching procedure (you, the orchestrator, do this — not a subagent):

1. Read sast/graphql-recon.md and count the numbered candidate sections under "Injection Candidate Sites" (### 1., ### 2., etc.).
2. Divide them into batches of up to 3. For example, 8 sites → 3 batches (1-3, 4-6, 7-8).
3. For each batch, extract the full text of those candidate sections from the recon file.
4. Launch all batch subagents in parallel, passing each one only its assigned candidate sections (plus architecture context).
5. Each subagent writes to sast/graphql-batch-N.md where N is the 1-based batch number.
6. Identify the project's primary language/framework from sast/architecture.md and select only the matching examples from the "Vulnerable vs. Secure Examples" section above. For example, if the project uses Node.js, include the "Node.js — dynamic document for downstream API" example; if Python, include "Python — string format into execute". Include these selected examples in each subagent's instructions where indicated by [TECH-STACK EXAMPLES] below.

Give each batch subagent the following instructions (substitute the batch-specific values):

Goal: For each assigned injection candidate site, determine whether user-supplied data can reach the dynamic part of the operation document. Our goal is to find GraphQL injection vulnerabilities. Write results to sast/graphql-batch-[N].md.

Your assigned candidate sites (from the recon phase):

[Paste the full text of the assigned candidate sections here, preserving the original numbering]

Context: You will be given the project's architecture summary. Use it for API layout, request handling, and BFF/gateway patterns.

GraphQL injection reference — What to look for:

User-controlled data must not alter the GraphQL document text (query/mutation/subscription source) except through bound variables on a static document. Flag when taint reaches string assembly of the operation.

What GraphQL injection is NOT — do not flag these here:

• SQL/NoSQL injection in resolvers — other SAST skills
• IDOR with static document + variables — authorization, not document injection
• Normal variable binding on a fixed document string
• Introspection enabled — unless the finding is specifically operation-string injection
• Query depth/complexity DoS — different class

Mitigations that reduce risk:

• Allowlist of fields or operation IDs before any string assembly
• Parser validation that rejects unexpected definitions (still prefer no user-controlled document structure)

Vulnerable vs. secure examples for this project's tech stack:

[TECH-STACK EXAMPLES]

For each assigned site, trace dynamic values backward:

1. Direct user input — query params, path params, JSON body fields (including nested query if re-wrapped), headers, cookies
2. Indirect user input — helpers, middleware, context builders
3. Second-order — stored preferences or DB fields later used to build a document; trace write path
4. Server-only — config, env, hardcoded fragments — not exploitable from the client

Classification:

• Vulnerable: User-controlled data reaches document construction with no effective mitigation

Phase 3: Merge — Consolidate Batch Results

After all Phase 2 batch subagents complete, read every sast/graphql-batch-*.md file and merge them into a single sast/graphql-results.md. You (the orchestrator) do this directly — no subagent needed.

Merge procedure:

1. Read all sast/graphql-batch-1.md, sast/graphql-batch-2.md, ... files.
2. Collect all findings from each batch file and combine them into one list, preserving the original classification and all detail fields.
3. Count totals across all batches for the executive summary.
4. Write the merged report to sast/graphql-results.md using this format:

# GraphQL Injection Analysis Results: [Project Name]

## Executive Summary
- Candidate sites analyzed: [total across all batches]
- Vulnerable: [N]
- Likely Vulnerable: [N]
- Not Vulnerable: [N]
- Needs Manual Review: [N]

## Findings

[All findings from all batches, grouped by classification:
 VULNERABLE first, then LIKELY VULNERABLE, then NEEDS MANUAL REVIEW, then NOT VULNERABLE.
 Preserve every field from the batch results exactly as written.]

5. After writing sast/graphql-results.md, delete all intermediate batch files (sast/graphql-batch-*.md).

---

Important Reminders

• Read sast/architecture.md and pass its content to all subagents as context.
• If Phase 1 finds no GraphQL technology, skip Phases 2 and 3 — write the "No GraphQL technology detected" results file.
• If GraphQL is used but Phase 1 finds no injection candidates, skip Phases 2 and 3 — write "No vulnerabilities found."
• Phase 2 must run after Phase 1 completes — it depends on the recon output.
• Phase 3 must run after all Phase 2 batches complete — it depends on all batch outputs.
• Batch size is 3 candidate sites per subagent. If there are 1-3 sites total, use a single subagent. If there are 10, use 4 subagents (3+3+3+1).
• Launch all batch subagents in parallel — do not run them sequentially.
• Each batch subagent receives only its assigned candidates' text from the recon file, not the entire recon file. This keeps each subagent's context small and focused.
• Phase 1 does not trace taint; Phase 2 does.
• Resolver-layer SQL/NoSQL issues belong to other skills; this skill targets operation document construction.
• When in doubt, classify as "Needs Manual Review" rather than "Not Vulnerable".
• Clean up intermediate files: delete sast/graphql-recon.md and all sast/graphql-batch-*.md files after the final sast/graphql-results.md is written.