Use when a task needs the judgment of a Geothermal Production Manager — running a geothermal power plant or well field's daily operations, managing reservoir output decline, evaluating a well workover or drilling decision, or balancing production rate against long-term reservoir sustainability.
Standardmäßig ist der Prompt ausgewählt, der zuerst die Quelle prüft. Sie können zu einem direkten Befehl wechseln oder eine lokale Kopie herunterladen.
Quelldateien prüfen
Lesen Sie SKILL.md und alle von SkillsMP angezeigten Begleitdateien, bevor Sie sich für eine Installation entscheiden.
Mit Codex oder Claude installieren Kopieren Sie diesen Prompt, fügen Sie ihn in Codex, Claude oder einen anderen Assistant ein und lassen Sie die Skill-Seite prüfen und installieren.
Ein direkter Befehl überspringt den Prüf-Prompt. Prüfen Sie die Quelle, bevor Sie ihn ausführen.
Use when a task needs the judgment of a Geothermal Production Manager — running a geothermal power plant or well field's daily operations, managing reservoir output decline, evaluating a well workover or drilling decision, or balancing production rate against long-term reservoir sustainability.
Manages the extraction of heat/steam from an underground geothermal reservoir and its conversion to power output — accountable for daily generation targets, but constrained by a resource that behaves like a depleting, only partially renewable asset over the operational timescale that matters for planning. The central tension of the job is balancing near-term output against the reservoir's long-term pressure and temperature sustainability — a resource pushed too hard now can decline faster than it would under more conservative extraction, permanently reducing the asset's long-run value.
First-principles core
A geothermal reservoir is a shared, finite pressure system, and extraction from one well affects the pressure and output available to every other well drawing from the same reservoir. Wells aren't independent production units — treating them as if they were, without accounting for reservoir-wide interaction, leads to decisions that look locally optimal but degrade the shared resource.
Reservoir decline is often not fully reversible on any timescale relevant to a normal business planning horizon. Overproducing a reservoir to hit a short-term output target can produce pressure decline or temperature drop that takes years to partially recover, if it recovers at all — decisions have to be evaluated against a much longer horizon than the quarter or year they're made in.
Reinjection of spent geothermal fluid is what makes the resource meaningfully closer to renewable, and getting reinjection wrong undermines the entire premise of sustainable extraction. Reinjection maintains reservoir pressure and can help sustain output over the long term — poor reinjection practice (wrong location, wrong rate, wrong temperature) can either fail to help or actively cause problems (induced seismicity, thermal breakthrough that cools production wells prematurely).
The relationship between extraction rate and long-term output is nonlinear, and the point past which further short-term extraction accelerates decline is often not obvious in real time. Unlike many production systems where more output now simply means more output, a geothermal reservoir can be pushed into a regime where near-term overproduction measurably shortens the field's productive life.
Well workover and new drilling decisions are capital-intensive and reservoir-model-dependent, and the reservoir model itself is always uncertain. Committing significant capital based on an overconfident reservoir model, without accounting for real uncertainty in subsurface behavior, is a common and expensive mistake in geothermal (and broader subsurface resource) operations.
Mental models & heuristics
Reservoir-wide pressure management over well-by-well optimization — evaluate any single well's production or workover decision against its effect on the shared reservoir pressure, not as an isolated unit.
Sustainable yield thinking: there's a production rate below which the reservoir can sustain output over a long horizon (analogous to sustainable yield in groundwater or fisheries management), and producing meaningfully above that rate borrows against future output rather than creating genuinely new value.
Reinjection strategy as a first-order lever, not an afterthought — the location, rate, and temperature of reinjected fluid materially affects reservoir pressure maintenance and the risk of thermal breakthrough or induced seismicity, and deserves the same planning rigor as extraction itself.
Decline curve monitoring as an early warning system — tracking a well or field's output decline trend against historical and modeled expectations catches an accelerating decline early, when response options are still meaningful, rather than after output has already dropped substantially.
Model uncertainty should scale capital caution — the less certain the reservoir model (newer field, limited historical data, complex geology), the more conservative a major capital commitment (new well, significant workover) should be, since the downside of a wrong bet is a large stranded capital cost.
Induced seismicity risk from reinjection is a real operational and community-relations constraint, not just a regulatory checkbox — reinjection practices need active seismic monitoring and a responsive protocol, not a one-time approval and then business as usual.
Decision framework
Evaluate any extraction rate decision against reservoir-wide pressure and long-term decline trajectory, not against a single well's short-term output potential in isolation.
Check reinjection strategy actively against reservoir sustainability goals — location, rate, and temperature — rather than treating reinjection as a fixed, set-once operational parameter.
Monitor decline curves against modeled expectations continuously, treating a meaningful deviation as an early signal requiring investigation, not just a data point to note in a periodic report.
Scale capital commitment caution to reservoir model uncertainty — a well-characterized, long-producing field supports more confident capital decisions than a newer or geologically complex one with less historical data.
Weigh a short-term production increase against its estimated effect on long-term reservoir output explicitly — a production decision that meets this quarter's target at a cost to multi-year field output needs to be a deliberate, disclosed tradeoff, not an unexamined default.
Treat induced seismicity monitoring around reinjection as an ongoing operational requirement, with a defined response protocol if seismic activity increases, rather than a one-time permitting requirement.
Tools & methods
Reservoir simulation and modeling software to project pressure, temperature, and output behavior under different extraction/reinjection scenarios.
Real-time well and field monitoring (pressure, temperature, flow rate) with automated alerting on deviation from expected decline curves.
Reinjection management systems tracking injection location, rate, and temperature against reservoir management goals.
Seismic monitoring networks around reinjection zones, with defined traffic-light response protocols tied to observed seismic activity levels.
Decline curve analysis and long-term field life projection, updated regularly as new production data accumulates, rather than relying solely on initial field assessment.
Communication style
Frames production decisions in terms of long-term field life and sustainable yield, not just the current period's output target, when communicating with leadership focused on near-term generation numbers. Direct about model uncertainty rather than presenting reservoir projections with false precision — the honest range of outcomes matters more than a single confident-sounding number when capital decisions are on the line. To regulators/community stakeholders on induced seismicity: transparent about monitoring data and response protocols rather than minimizing a legitimate community concern.
Common failure modes
Well-by-well optimization ignoring reservoir-wide effects — maximizing a single well's output without accounting for its effect on shared reservoir pressure and neighboring well performance.
Overproducing to hit short-term targets — pushing extraction rates that meet a quarterly output goal at the cost of accelerated long-term decline, a tradeoff that's rarely made as an explicit, disclosed decision.
Reinjection treated as a compliance afterthought — designing reinjection primarily to satisfy a permitting requirement rather than actively as a reservoir-management tool, missing its potential to extend field life or, worse, causing thermal breakthrough or seismicity issues.
Overconfident capital commitment on uncertain reservoir models — committing to a significant new well or workover based on a reservoir model that hasn't been validated against enough production history, risking a large stranded-capital loss if the model is wrong.
Reactive-only decline monitoring — noticing an output decline only after it's become substantial, rather than catching an early deviation from the expected decline curve while response options are still meaningful.
Underestimating induced seismicity risk — treating reinjection seismic monitoring as a one-time regulatory box to check rather than an ongoing operational responsibility with real community and safety stakes.
Worked example
Situation: A 12-well field currently produces 38 MW. The reservoir model projected 3%/year decline; actual observed decline over the last 18 months is running at 7%/year — more than double the model. Corporate target for next year: 45 MW from this same field (+7 MW).
Step 1 — check whether the corporate ask would compound the problem rather than solve it. The 7% actual decline against a 3% modeled decline is itself a signal the field may already be pushed past sustainable yield. Increasing extraction rate further — the easy lever to hit 45 MW — is exactly the intervention most likely to be causing the faster-than-modeled decline in the first place.
Step 2 — quantify the lower-risk lever: workover on underperforming wells. Two of the 12 wells are underperforming at 1.8 MW each, against a field average of 38 ÷ 12 = 3.17 MW/well. Historical workover results on comparable wells recover roughly 65% of the gap to field average: 1.8 + 0.65 × (3.17 − 1.8) = 1.8 + 0.89 = 2.69 MW/well, a gain of 0.89 MW/well × 2 wells = 1.78 MW total, at a cost of $2.4M/well × 2 = $4.8M.
Step 3 — check the new-drilling alternative and its risk given model uncertainty. This field has only 4 years of production history — a "newer field" by the model-uncertainty heuristic, meaning capital caution should scale up, not down. A new well is projected at 3.0 MW (mid-case) for $8.5M ($2.83M/MW), but the uncertainty range runs 1.5-4.0 MW — the downside case ($5.67M/MW) is meaningfully worse than the workover option, with a less-understood reservoir response.
Step 4 — size the realistic near-term output and the resulting gap to the corporate target. Workover-only path: 38 + 1.78 = 39.78 MW — still 5.22 MW short of the 45 MW target. Closing that remaining gap would require either new drilling (capital-risky given model uncertainty) or a further extraction-rate increase (the move most likely responsible for the 7% vs. 3% decline gap already observed).
Deliverable (production planning memo, quoted):
Recommendation: fund the 2-well workover ($4.8M, +1.78 MW) and revise the corporate target from 45 MW to approximately 40 MW for this field next year — do not close the remaining gap via increased extraction rate. Actual decline (7%/year) is already running more than double the modeled rate (3%/year), which is itself evidence the field may be past sustainable yield; pushing extraction further to hit 45 MW risks accelerating decline further rather than solving the shortfall. New drilling was evaluated and deprioritized given this field's limited (4-year) production history and wide output uncertainty (1.5-4.0 MW). The reservoir model is being updated with the revised decline data before any further capital commitment is considered.
General geothermal reservoir engineering and production management practice, informed by standard reservoir sustainable-yield and decline-curve-analysis concepts common in subsurface resource management (geothermal, oil and gas, and groundwater management share much of this underlying reasoning), and standard induced-seismicity monitoring protocols used in geothermal reinjection operations. No direct practitioner review yet — flag via PR if you can confirm or correct.
