update-bom

Estrellas203

Forks12

Actualizado18 de junio de 2026 a las 00:14

Use when the BOM in BUILD_GUIDE.md needs to be checked against or synchronized with the schematic in hardware/pcb/schematic.pdf or the KiCad source in hardware/pcb/kicad/. Trigger when adding, removing, or changing electronic components, or when the user asks to verify BOM correctness.

Instalación

Instalar con Codex o Claude Copia este prompt, pégalo en Codex, Claude u otro asistente, y deja que revise la página de la skill y la instale por ti.

Ejecutar en Manus

Fuente

engmung

engmung/Patternflow

Abrir repositorio de GitHub Ver repositorios del creador

Descarga

Ejecutar en Manus

Ocupaciones relacionadasSOC

Basado en la clasificación ocupacional SOC

Ingenieros eléctricosArquitectura e ingeniería·SOC 17-2071

SKILL.md

readonly

name	update-bom
description	Use when the BOM in BUILD_GUIDE.md needs to be checked against or synchronized with the schematic in hardware/pcb/schematic.pdf or the KiCad source in hardware/pcb/kicad/. Trigger when adding, removing, or changing electronic components, or when the user asks to verify BOM correctness.

Update BOM Skill

Follow these steps to safely synchronize the Bill of Materials with the hardware design:

Read current BOM table in BUILD_GUIDE.md §1.
Cross-reference with hardware/pcb/kicad/patternflow.kicad_sch (if readable) or hardware/pcb/schematic.pdf (note its existence and ask user for confirmation if unable to parse PDF directly).
Verify counts match:
- Resistors (R1–R12) = 12x 10kΩ 0805
- Capacitors (C1–C10, C12–C15) = 14x 100nF 0805
- Bulk Capacitor (C11) = 1x 1000µF electrolytic
- Connectors (J1, J2, J3)
- Encoders (SW1–SW4) = 4x EC11
- MCU (U1) = ESP32-S3-WROOM-1 (N16R8)
Report mismatches to the user before making any edits.
After confirming, update BUILD_GUIDE.md and any relevant AliExpress affiliate sourcing links to match the verified components.

Más de este repositorio

mismo repositorio

release-version

engmung/Patternflow

Use when releasing a new version (v1.x or v2.x) of Patternflow. Triggers on requests like "release v1.1", "tag a new version", "publish a release".

2026-06-18203

add-pattern

engmung/Patternflow

Use when adding a new generative pattern to the Patternflow firmware. Triggers on requests like "add a new pattern", "create a [name] pattern", or when the user describes a visual effect they want on the LED matrix.

2026-05-10203

firmware-cleanup

engmung/Patternflow

Use when preparing firmware code for public release or pull request. Triggers on requests like "clean up the firmware", "prepare this code for release", or when reviewing firmware before commit.

2026-05-10203

name	update-bom
description	Use when the BOM in BUILD_GUIDE.md needs to be checked against or synchronized with the schematic in hardware/pcb/schematic.pdf or the KiCad source in hardware/pcb/kicad/. Trigger when adding, removing, or changing electronic components, or when the user asks to verify BOM correctness.

Update BOM Skill

Follow these steps to safely synchronize the Bill of Materials with the hardware design:

Read current BOM table in BUILD_GUIDE.md §1.
Cross-reference with hardware/pcb/kicad/patternflow.kicad_sch (if readable) or hardware/pcb/schematic.pdf (note its existence and ask user for confirmation if unable to parse PDF directly).
Verify counts match:
- Resistors (R1–R12) = 12x 10kΩ 0805
- Capacitors (C1–C10, C12–C15) = 14x 100nF 0805
- Bulk Capacitor (C11) = 1x 1000µF electrolytic
- Connectors (J1, J2, J3)
- Encoders (SW1–SW4) = 4x EC11
- MCU (U1) = ESP32-S3-WROOM-1 (N16R8)
Report mismatches to the user before making any edits.
After confirming, update BUILD_GUIDE.md and any relevant AliExpress affiliate sourcing links to match the verified components.