update-bom

Étoiles203

Forks12

Mis à jour18 juin 2026 à 00:14

Use when the BOM in BUILD_GUIDE.md needs to be checked against or synchronized with the schematic in hardware/pcb/schematic.pdf or the KiCad source in hardware/pcb/kicad/. Trigger when adding, removing, or changing electronic components, or when the user asks to verify BOM correctness.

Installation

Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.

Exécuter dans Manus

Source

engmung

engmung/Patternflow

Ouvrir le dépôt GitHub Voir les dépôts du créateur

Téléchargement

Exécuter dans Manus

Métiers associésSOC

Basé sur la classification professionnelle SOC

Ingénieurs électriquesArchitecture et ingénierie·SOC 17-2071

SKILL.md

readonly

name	update-bom
description	Use when the BOM in BUILD_GUIDE.md needs to be checked against or synchronized with the schematic in hardware/pcb/schematic.pdf or the KiCad source in hardware/pcb/kicad/. Trigger when adding, removing, or changing electronic components, or when the user asks to verify BOM correctness.

Update BOM Skill

Follow these steps to safely synchronize the Bill of Materials with the hardware design:

Read current BOM table in BUILD_GUIDE.md §1.
Cross-reference with hardware/pcb/kicad/patternflow.kicad_sch (if readable) or hardware/pcb/schematic.pdf (note its existence and ask user for confirmation if unable to parse PDF directly).
Verify counts match:
- Resistors (R1–R12) = 12x 10kΩ 0805
- Capacitors (C1–C10, C12–C15) = 14x 100nF 0805
- Bulk Capacitor (C11) = 1x 1000µF electrolytic
- Connectors (J1, J2, J3)
- Encoders (SW1–SW4) = 4x EC11
- MCU (U1) = ESP32-S3-WROOM-1 (N16R8)
Report mismatches to the user before making any edits.
After confirming, update BUILD_GUIDE.md and any relevant AliExpress affiliate sourcing links to match the verified components.

Plus depuis ce dépôt

même dépôt

release-version

engmung/Patternflow

Use when releasing a new version (v1.x or v2.x) of Patternflow. Triggers on requests like "release v1.1", "tag a new version", "publish a release".

2026-06-18203

add-pattern

engmung/Patternflow

Use when adding a new generative pattern to the Patternflow firmware. Triggers on requests like "add a new pattern", "create a [name] pattern", or when the user describes a visual effect they want on the LED matrix.

2026-05-10203

firmware-cleanup

engmung/Patternflow

Use when preparing firmware code for public release or pull request. Triggers on requests like "clean up the firmware", "prepare this code for release", or when reviewing firmware before commit.

2026-05-10203

name	update-bom
description	Use when the BOM in BUILD_GUIDE.md needs to be checked against or synchronized with the schematic in hardware/pcb/schematic.pdf or the KiCad source in hardware/pcb/kicad/. Trigger when adding, removing, or changing electronic components, or when the user asks to verify BOM correctness.

Update BOM Skill

Follow these steps to safely synchronize the Bill of Materials with the hardware design:

Read current BOM table in BUILD_GUIDE.md §1.
Cross-reference with hardware/pcb/kicad/patternflow.kicad_sch (if readable) or hardware/pcb/schematic.pdf (note its existence and ask user for confirmation if unable to parse PDF directly).
Verify counts match:
- Resistors (R1–R12) = 12x 10kΩ 0805
- Capacitors (C1–C10, C12–C15) = 14x 100nF 0805
- Bulk Capacitor (C11) = 1x 1000µF electrolytic
- Connectors (J1, J2, J3)
- Encoders (SW1–SW4) = 4x EC11
- MCU (U1) = ESP32-S3-WROOM-1 (N16R8)
Report mismatches to the user before making any edits.
After confirming, update BUILD_GUIDE.md and any relevant AliExpress affiliate sourcing links to match the verified components.