mains-aegis-user-operations

Explicit end-user route for operating Mains Aegis devices through released mains-aegis host tools.

Repositorio: IvanLi-CN/mains-aegis
Última actividad en el origen: 3 de julio de 2026 a las 15:40
Idioma detectado de SKILL.md: inglés
Estrellas: 0
Forks: 1

Opciones de instalación

De forma predeterminada está seleccionado el prompt que primero revisa el origen. Puedes cambiar a un comando directo o descargar una copia local.

Instalar con Codex o Claude Copia este prompt, pégalo en Codex, Claude u otro asistente, y deja que revise la página de la skill y la instale por ti.

Un comando directo omite el prompt de revisión. Revisa el origen antes de ejecutarlo.

npx skills add https://github.com/IvanLi-CN/mains-aegis --skill mains-aegis-user-operations

El comando permanece en una sola línea. Desplázate horizontalmente para revisarlo antes de copiarlo.

¿Prefieres una copia local? Descarga los archivos que SkillsMP tiene disponibles ahora.

Revisa los archivos de origen

Lee SKILL.md y los archivos complementarios que muestra SkillsMP antes de decidir si quieres instalarlo.

SKILL.md

Instrucciones de origen · Vista previa de solo lectura

Volver a la búsqueda Volver a la instalación

mains-aegis-devd-flow

Default in-repo flow for Mains Aegis host-tools/devd development, validation, diagnostics, and hardware read/session-read checks.

2026-08-04

power-validation

Use when operating, extending, or debugging Mains Aegis Power Path Validation: the owner-facing power-validation CLI, its adapter protocol for replaceable power sources/electronic loads, safety gates, report generation, and DIY parameter-testing workflow.

2026-07-02

Ver todos los de este repositorio

Mains Aegis user operations

Use this skill only when the owner explicitly asks for end-user/released host-tools operation, installation validation, or this skill by name.

For Codex work inside the mains-aegis repository, default to $mains-aegis-devd-flow for development, validation, diagnostics, field investigation, and hardware read/session-read checks.

Required boundaries

Require released mains-aegis and mains-aegis-devd binaries to be installed and available on PATH.

If the released tools are missing, stop and instruct installation from the latest host-tools-v* release archive. Do not fall back to cargo run, local source builds, or direct espflash.

Use mains-aegis CLI for commands; normal CLI operations auto-start or reuse the singleton IPC daemon.

Use mains-aegis daemon http when Web/API access is explicitly needed; CLI commands can point at its --ipc endpoint to share the same daemon state.

Non-loopback daemon http requires --allow-lan-bridge and --auth-token-file; API clients must send Authorization: Bearer <token>, while browser EventSource requests use service_token=<token> or the legacy bridge_token=<token>.

Real flash/reset/monitor requires a known bound device and owner authorization. Mock/dry-run validation is allowed.

CLI flash and host power commands default to dry-run; real flash and real host power actions require explicit --real plus owner authorization.

Standard user flow

Verify tools:

mains-aegis --version
mains-aegis-devd --version

Inspect devices:

mains-aegis devices list
mains-aegis devices scan

Owner-visible device lifecycle:

mains-aegis device <id> bind --alias <name>
mains-aegis device <id> connect
mains-aegis device <id> identity

Firmware operation:

Load/select artifact.
Run flash dry-run before any real flash.
Only run real flash with --real after owner authorization.

Hard blocker

If mains-aegis or mains-aegis-devd is unavailable, report: released host tools are not installed; install the latest host-tools-v* release package for the platform and retry.