mains-aegis-user-operations

Explicit end-user route for operating Mains Aegis devices through released mains-aegis host tools.

Repositório: IvanLi-CN/mains-aegis
Última atividade na origem: 3 de julho de 2026 às 15:40
Idioma detectado do SKILL.md: inglês
Estrelas: 0
Forks: 1

Opções de instalação

Por padrão, está selecionado o prompt que primeiro revisa a origem. Você pode mudar para um comando direto ou baixar uma cópia local.

Instalar com Codex ou Claude Copie este prompt, cole no Codex, Claude ou outro assistente e deixe que ele revise a página da skill e instale para você.

Um comando direto ignora o prompt de revisão. Verifique a origem antes de executá-lo.

npx skills add https://github.com/IvanLi-CN/mains-aegis --skill mains-aegis-user-operations

O comando permanece em uma só linha. Role horizontalmente para revisá-lo antes de copiar.

Prefere uma cópia local? Baixe os arquivos disponíveis atualmente no SkillsMP.

Revise os arquivos de origem

Leia o SKILL.md e os arquivos complementares exibidos pelo SkillsMP antes de decidir se vai instalar.

SKILL.md

Instruções da origem · Visualização somente leitura

Voltar à pesquisa Voltar à instalação

mains-aegis-devd-flow

Default in-repo flow for Mains Aegis host-tools/devd development, validation, diagnostics, and hardware read/session-read checks.

2026-08-04

power-validation

Use when operating, extending, or debugging Mains Aegis Power Path Validation: the owner-facing power-validation CLI, its adapter protocol for replaceable power sources/electronic loads, safety gates, report generation, and DIY parameter-testing workflow.

2026-07-02

Ver todas deste repositório

Mains Aegis user operations

Use this skill only when the owner explicitly asks for end-user/released host-tools operation, installation validation, or this skill by name.

For Codex work inside the mains-aegis repository, default to $mains-aegis-devd-flow for development, validation, diagnostics, field investigation, and hardware read/session-read checks.

Required boundaries

Require released mains-aegis and mains-aegis-devd binaries to be installed and available on PATH.

If the released tools are missing, stop and instruct installation from the latest host-tools-v* release archive. Do not fall back to cargo run, local source builds, or direct espflash.

Use mains-aegis CLI for commands; normal CLI operations auto-start or reuse the singleton IPC daemon.

Use mains-aegis daemon http when Web/API access is explicitly needed; CLI commands can point at its --ipc endpoint to share the same daemon state.

Non-loopback daemon http requires --allow-lan-bridge and --auth-token-file; API clients must send Authorization: Bearer <token>, while browser EventSource requests use service_token=<token> or the legacy bridge_token=<token>.

Real flash/reset/monitor requires a known bound device and owner authorization. Mock/dry-run validation is allowed.

CLI flash and host power commands default to dry-run; real flash and real host power actions require explicit --real plus owner authorization.

Standard user flow

Verify tools:

mains-aegis --version
mains-aegis-devd --version

Inspect devices:

mains-aegis devices list
mains-aegis devices scan

Owner-visible device lifecycle:

mains-aegis device <id> bind --alias <name>
mains-aegis device <id> connect
mains-aegis device <id> identity

Firmware operation:

Load/select artifact.
Run flash dry-run before any real flash.
Only run real flash with --real after owner authorization.

Hard blocker

If mains-aegis or mains-aegis-devd is unavailable, report: released host tools are not installed; install the latest host-tools-v* release package for the platform and retry.