laser-vector
Inspect, trace, vectorize, clean, measure, normalize, convert, or repair raster, SVG, and DXF artwork for laser fabrication. Use for uploaded logos, silhouettes, sketches, photographs, ambiguous SVG scale, open DXF contours, duplicate paths, and trace candidate comparison.
Datos de origen
- Repositorio
- jl-codes/laser-skills
- Última actividad en el origen
- 3 de agosto de 2026 a las 16:38
- Idioma detectado de SKILL.md
- inglés
- Estrellas
- 0
- Forks
- 0
Opciones de instalación
De forma predeterminada está seleccionado el prompt que primero revisa el origen. Puedes cambiar a un comando directo o descargar una copia local.
Revisa los archivos de origen
Lee SKILL.md y los archivos complementarios que muestra SkillsMP antes de decidir si quieres instalarlo.
Explorador de archivos
23 archivosMostrando SKILL.md
SKILL.md
Instrucciones de origen · Vista previa de solo lectura- name
- laser-vector
- description
- Inspect, trace, vectorize, clean, measure, normalize, convert, or repair raster, SVG, and DXF artwork for laser fabrication. Use for uploaded logos, silhouettes, sketches, photographs, ambiguous SVG scale, open DXF contours, duplicate paths, and trace candidate comparison.
# Laser vector
1. Read [references/trace.md](references/trace.md) for raster work or [references/vector-normalization.md](references/vector-normalization.md) for SVG/DXF.
2. Preserve the upload and write only derived outputs.
3. Establish one trusted physical dimension before claiming scale.
4. Run `scripts/laser-vector inspect INPUT --json` before modifying artwork.
5. For ambiguous raster tracing, run `scripts/laser-vector trace IMAGE --output-dir DIR` and compare at least two recorded candidates. Preserve photos as raster unless vectorization is requested.
6. Normalize with explicit millimeter dimensions and rerun inspection.
7. Return normalized output and its geometry report to `$laser-preflight`.
Ver en GitHub