Copia este prompt en el asistente de IA que estés usando.
Follow https://skillsmp.com/skill-install/prompt.md to install Agent Skills from https://github.com/matlab/simulink-agentic-toolkit.Cargando el README del repositorio…
Mostrando 40 de 44 skills recopiladas.
Register, add, or update existing custom Simulink block libraries and configure block policy and knowledge index. Use when a user wants to register, set up, configure, or add existing .slx library files for agent-assisted model building. Do NOT use when the…
Idioma del texto original: inglés
Build and refine multi-layer (functional/logical/physical) system architecture models with System Composer. Use when building or restructuring architecture models, or when working with interface dictionaries and port interfaces (including composite boundary…
Idioma del texto original: inglés
Statically analyze a Simulink model for Rapid Accelerator (raccel) mode incompatibilities. Identifies unsupported blocks (Interpreted MATLAB Function, Level-2 S-Functions without TLC), configuration issues, and data type restrictions that prevent code…
Idioma del texto original: inglés
Configure Simulink models for Embedded Coder (ERT), Simulink Coder (GRT rapid-prototyping), or AUTOSAR code generation. Use when the user asks to generate embedded C or C++ code, run a full build of a model, produce a code generation report, configure a model…
Idioma del texto original: inglés
Use when you need to verify a Simulink model is compatible with SLCI code inspection, or to apply fixes for identified incompatibilities. Checks model configuration, identifies incompatibilities, and explains why each constraint is required for verification.…
Idioma del texto original: inglés
Use when SLCI code inspection has failed due to compatibility issues and you need to diagnose the incompatibilities. Traces inspection failures back to root-cause incompatibility settings or known limitations by matching failed code lines against known…
Idioma del texto original: inglés
Configure a Simulink model for Simulink Real-Time code generation and deployment. Use when setting up a model for Simulink Real-Time, selecting the correct system target file, fixing TLC/STF mismatches, applying fixed-step solver settings, validating…
Idioma del texto original: inglés
Manage Simulink Real-Time target computers from MATLAB — list available targets, check whether a target is connected, read its lifecycle status, add/remove/rename targets, set IP addresses and credentials, choose the default target, install TLS material,…
Idioma del texto original: inglés
Set up signal capture for a Simulink Real-Time application using `slrealtime.Instrument`. Use when choosing which signals a real-time application captures and where the data goes — test-pointing or canvas-badging a signal before build (`TestPoint`,…
Idioma del texto original: inglés
Build, deploy, run, monitor, tune, and stop Simulink Real-Time applications. Use when the user wants to build a Simulink Real-Time model, load/start/stop an `.mldatx` on a target, set stop time or start options, drive root inports/playback/parameter…
Idioma del texto original: inglés
Collect and assess quality metrics for Simulink models using the metric.Engine API. Use when evaluating model design quality (maintainability, complexity, architecture) or testing completeness (unit testing, SIL, PIL, coverage, pass rates) after edits or test…
Idioma del texto original: inglés
Use this skill when authoring, reworking, or validating a Classic AUTOSAR software component (SWC) in Simulink, including autosar.api mappings, runnables, timing events, sender-receiver ports, client-server operations, IRVs, BSW service callers, and component…
Idioma del texto original: inglés
Use the skill to control and verify the code interface configuration of your model — how Simulink® model elements are represented in the generated C or C++ code. This includes — (1) specifying names, types (storage classes), and placement of variables that…
Idioma del texto original: inglés
Optimizes Simulink models for Embedded Coder generated code. Use when asked to optimize or improve generated code, or reduce code metrics for a Simulink model. Targets: execution time, memory footprint (RAM, ROM, stack, data copies), code size, MISRA…
Idioma del texto original: inglés
Sanitize and anonymize a Simulink model for external sharing. Use when stripping proprietary content, anonymizing block/signal names, removing metadata, or creating a shareable reproduction model for bug reports. Do NOT use for simply copying or sharing a…
Idioma del texto original: inglés
Find, show, open, or identify shipped MathWorks example models that demonstrate a concept, block, or application domain, and return the command to open them.
Idioma del texto original: inglés
Use this skill to run multiple Simulink simulations in parallel with parsim, batchsim, and DesignStudy. TRIGGER when: user asks for parameter sweep, sweeping/varying parameters across simulations, Monte Carlo study, batch simulation, running multiple…
Idioma del texto original: inglés
Manages MATLAB projects for Simulink workflows: path management, file registration, labels, source control configuration, and project lifecycle. Use when creating projects, adding models/dictionaries/requirements to projects, configuring labels for…
Idioma del texto original: inglés
Use when writing or editing Simscape Language (.ssc) source files — components, domains, or functions. Triggers include: model a physical component in .ssc; write physical equations for a Simscape block; add or modify physics or parameterization options in a…
Idioma del texto original: inglés
Use this skill when the user asks to check Simulink model compliance against a standard (MISRA, MAB, JMAAB, ISO, DO, IEC, EN, CERT C/CWE, AUTOSAR, Simulink Code Inspector (SLCI)), wants to run Model Advisor checks, or needs a compliance report with fix…
Idioma del texto original: inglés
Use when a Simulink model is incompatible with Simulink Design Verifier (sldvcompat returns false, or an SLDV analysis errors out on an unsupported construct) and needs to be made analyzable. Diagnoses the incompatibility, applies the matching fix to a copy,…
Idioma del texto original: inglés
Create, populate, and manage safety analysis spreadsheets (FMEA, FHA, HARA, custom) and fault trees (FTA) in Safety Analysis Manager. Use when the user asks to perform FMEA, hazard analysis, fault tree analysis, safety analysis, or work with Safety Analysis…
Idioma del texto original: inglés
Use when asked to run Design Error Detection (quick defect scan), find design errors in a Simulink model, perform root cause analysis on DED findings, fix division-by-zero, overflow, dead logic or out-of-bounds defects detected by SLDV, or diagnose why…
Idioma del texto original: inglés
Use this skill when the user asks to summarize, or asks why Simulink Coverage objectives are missing, unsatisfied, or uncovered on a coverage result they already have — why specific decision, condition, MCDC, relational-boundary, or saturation/overflow…
Idioma del texto original: inglés
Tests Simulink models using either ephemeral Gherkin-based tests (model_test) for quick validation or persistent tests (Simulink Test API) authored from requirements or behavioral specs. Requires Simulink Test.
Idioma del texto original: inglés
Generates draft requirements from Simulink models. Use when drafting or updating requirement artifacts from a model. Prefers Requirements Toolbox (.slreqx) when available; falls back to structured YAML.
Idioma del texto original: inglés
Customize A2L (ASAP2) files generated from Simulink models using coder.asap2 and coder.mapping APIs. Use this skill when adding COMPU_METHODs, creating GROUPs, converting STD_AXIS to COM_AXIS, adding BIT_OPERATIONs, creating VARIANT_CODING, excluding…
Idioma del texto original: inglés
Builds and edits Simulink, System Composer, Stateflow, and Simscape models. Use when modifying model structure, parameters, ports, connections, or Stateflow chart internals.
Idioma del texto original: inglés
Guide users through creating and managing .satk/block-policy.json for controlling which blocks the agent can use, which are excluded, and which block parameters the agent should not modify. Use when setting up block usage policy for a project.
Idioma del texto original: inglés
Generate a standalone bug report that another developer can use to reproduce, investigate, and fix an issue. Use when the user says 'file a bug', 'write a bug report', 'report this issue', or asks to document a defect for handoff.
Idioma del texto original: inglés
Use this skill when the user wants to curate the SATK library knowledge index for a Simulink project — mark commonly used blocks, correct auto-assigned block categories, or improve block descriptions so the model-building agent picks better blocks from custom…
Idioma del texto original: inglés
Building or editing Simulink (.slx) models that stream signals in frames using DSP System Toolbox — audio, vibration, radar, comms. Use when the prompt names a Simulink block (Discrete FIR Filter, Buffer, Unbuffer, Rate Transition, Downsample, Upsample,…
Idioma del texto original: inglés
Build motor control solutions using Motor Control Blockset for PMSM, induction motors, BLDC, and SynRM. Implement field oriented control, sensorless FOC, six-step control, speed control, current control, and torque control. Configure SVPWM, flux weakening,…
Idioma del texto original: inglés
Author or upgrade Model Advisor checks for Simulink and System Composer models. Covers the full lifecycle: guideline authoring, check specification, Model Advisor check implementation, and qualification testing. Use when creating new checks (edit-time,…
Idioma del texto original: inglés
Converts a double-precision Simulink system or subsystem to single precision using DataTypeWorkflow.Single (Fixed-Point Designer). The single conversion replaces all user-specified double-precision data types, as well as output data types that compile to…
Idioma del texto original: inglés
Configures Simulink simulations non-destructively using SimulationInput objects — parameter overrides without modifying the model, batch sweeps via parsim, custom input signals via Dataset, and simulation data retrieval via logsout. Use when running…
Idioma del texto original: inglés
Specify algorithms for Model-Based Design: system specs, architecture specs, implementation plans, test plans. Use when creating specifications for controllers, signal processing, diagnostics, estimators, or other algorithms authored in Simulink, Stateflow,…
Idioma del texto original: inglés
Specify plant models for closed-loop simulation: system specs, architecture, build plans, validation plans. Use when creating, updating, or reviewing plant model specifications, planning plant model architecture, or planning plant model validation.
Idioma del texto original: inglés
Use when integrating legacy code, custom code, or C/C++ code into Simulink via C Function blocks. Configure Simulink C Function blocks programmatically using the SymbolSpec API. TRIGGER when the user: - Asks about calling or wrapping C/C++ code or libraries…
Idioma del texto original: inglés
Synthesize new waveforms from scratch for Simulink inports using createInputDataset. Use ONLY when the user asks to generate, create, or synthesize signals (step, ramp, sine, chirp, pulse, noise) to populate a Dataset for External Inputs or Signal Editor.…
Idioma del texto original: inglés
No se ha podido cargar el README. Puedes seguir explorando los Skills del repositorio a continuación.