このプロンプトをコピーして、使用中の AI アシスタントに送ってください。
Follow https://skillsmp.com/skill-install/prompt.md to install Agent Skills from https://github.com/matlab/simulink-agentic-toolkit.リポジトリの README を読み込んでいます…
収集済み skill 44 件中 40 件を表示しています。
Register, add, or update existing custom Simulink block libraries and configure block policy and knowledge index. Use when a user wants to register, set up, configure, or add existing .slx library files for agent-assisted model building. Do NOT use when the…
原文の言語: 英語
Build and refine multi-layer (functional/logical/physical) system architecture models with System Composer. Use when building or restructuring architecture models, or when working with interface dictionaries and port interfaces (including composite boundary…
原文の言語: 英語
Statically analyze a Simulink model for Rapid Accelerator (raccel) mode incompatibilities. Identifies unsupported blocks (Interpreted MATLAB Function, Level-2 S-Functions without TLC), configuration issues, and data type restrictions that prevent code…
原文の言語: 英語
Configure Simulink models for Embedded Coder (ERT), Simulink Coder (GRT rapid-prototyping), or AUTOSAR code generation. Use when the user asks to generate embedded C or C++ code, run a full build of a model, produce a code generation report, configure a model…
原文の言語: 英語
Use when you need to verify a Simulink model is compatible with SLCI code inspection, or to apply fixes for identified incompatibilities. Checks model configuration, identifies incompatibilities, and explains why each constraint is required for verification.…
原文の言語: 英語
Use when SLCI code inspection has failed due to compatibility issues and you need to diagnose the incompatibilities. Traces inspection failures back to root-cause incompatibility settings or known limitations by matching failed code lines against known…
原文の言語: 英語
Configure a Simulink model for Simulink Real-Time code generation and deployment. Use when setting up a model for Simulink Real-Time, selecting the correct system target file, fixing TLC/STF mismatches, applying fixed-step solver settings, validating…
原文の言語: 英語
Manage Simulink Real-Time target computers from MATLAB — list available targets, check whether a target is connected, read its lifecycle status, add/remove/rename targets, set IP addresses and credentials, choose the default target, install TLS material,…
原文の言語: 英語
Set up signal capture for a Simulink Real-Time application using `slrealtime.Instrument`. Use when choosing which signals a real-time application captures and where the data goes — test-pointing or canvas-badging a signal before build (`TestPoint`,…
原文の言語: 英語
Build, deploy, run, monitor, tune, and stop Simulink Real-Time applications. Use when the user wants to build a Simulink Real-Time model, load/start/stop an `.mldatx` on a target, set stop time or start options, drive root inports/playback/parameter…
原文の言語: 英語
Collect and assess quality metrics for Simulink models using the metric.Engine API. Use when evaluating model design quality (maintainability, complexity, architecture) or testing completeness (unit testing, SIL, PIL, coverage, pass rates) after edits or test…
原文の言語: 英語
Use this skill when authoring, reworking, or validating a Classic AUTOSAR software component (SWC) in Simulink, including autosar.api mappings, runnables, timing events, sender-receiver ports, client-server operations, IRVs, BSW service callers, and component…
原文の言語: 英語
Use the skill to control and verify the code interface configuration of your model — how Simulink® model elements are represented in the generated C or C++ code. This includes — (1) specifying names, types (storage classes), and placement of variables that…
原文の言語: 英語
Optimizes Simulink models for Embedded Coder generated code. Use when asked to optimize or improve generated code, or reduce code metrics for a Simulink model. Targets: execution time, memory footprint (RAM, ROM, stack, data copies), code size, MISRA…
原文の言語: 英語
Sanitize and anonymize a Simulink model for external sharing. Use when stripping proprietary content, anonymizing block/signal names, removing metadata, or creating a shareable reproduction model for bug reports. Do NOT use for simply copying or sharing a…
原文の言語: 英語
Find, show, open, or identify shipped MathWorks example models that demonstrate a concept, block, or application domain, and return the command to open them.
原文の言語: 英語
Use this skill to run multiple Simulink simulations in parallel with parsim, batchsim, and DesignStudy. TRIGGER when: user asks for parameter sweep, sweeping/varying parameters across simulations, Monte Carlo study, batch simulation, running multiple…
原文の言語: 英語
Manages MATLAB projects for Simulink workflows: path management, file registration, labels, source control configuration, and project lifecycle. Use when creating projects, adding models/dictionaries/requirements to projects, configuring labels for…
原文の言語: 英語
Use when writing or editing Simscape Language (.ssc) source files — components, domains, or functions. Triggers include: model a physical component in .ssc; write physical equations for a Simscape block; add or modify physics or parameterization options in a…
原文の言語: 英語
Use this skill when the user asks to check Simulink model compliance against a standard (MISRA, MAB, JMAAB, ISO, DO, IEC, EN, CERT C/CWE, AUTOSAR, Simulink Code Inspector (SLCI)), wants to run Model Advisor checks, or needs a compliance report with fix…
原文の言語: 英語
Use when a Simulink model is incompatible with Simulink Design Verifier (sldvcompat returns false, or an SLDV analysis errors out on an unsupported construct) and needs to be made analyzable. Diagnoses the incompatibility, applies the matching fix to a copy,…
原文の言語: 英語
Create, populate, and manage safety analysis spreadsheets (FMEA, FHA, HARA, custom) and fault trees (FTA) in Safety Analysis Manager. Use when the user asks to perform FMEA, hazard analysis, fault tree analysis, safety analysis, or work with Safety Analysis…
原文の言語: 英語
Use when asked to run Design Error Detection (quick defect scan), find design errors in a Simulink model, perform root cause analysis on DED findings, fix division-by-zero, overflow, dead logic or out-of-bounds defects detected by SLDV, or diagnose why…
原文の言語: 英語
Use this skill when the user asks to summarize, or asks why Simulink Coverage objectives are missing, unsatisfied, or uncovered on a coverage result they already have — why specific decision, condition, MCDC, relational-boundary, or saturation/overflow…
原文の言語: 英語
Tests Simulink models using either ephemeral Gherkin-based tests (model_test) for quick validation or persistent tests (Simulink Test API) authored from requirements or behavioral specs. Requires Simulink Test.
原文の言語: 英語
Generates draft requirements from Simulink models. Use when drafting or updating requirement artifacts from a model. Prefers Requirements Toolbox (.slreqx) when available; falls back to structured YAML.
原文の言語: 英語
Customize A2L (ASAP2) files generated from Simulink models using coder.asap2 and coder.mapping APIs. Use this skill when adding COMPU_METHODs, creating GROUPs, converting STD_AXIS to COM_AXIS, adding BIT_OPERATIONs, creating VARIANT_CODING, excluding…
原文の言語: 英語
Builds and edits Simulink, System Composer, Stateflow, and Simscape models. Use when modifying model structure, parameters, ports, connections, or Stateflow chart internals.
原文の言語: 英語
Guide users through creating and managing .satk/block-policy.json for controlling which blocks the agent can use, which are excluded, and which block parameters the agent should not modify. Use when setting up block usage policy for a project.
原文の言語: 英語
Generate a standalone bug report that another developer can use to reproduce, investigate, and fix an issue. Use when the user says 'file a bug', 'write a bug report', 'report this issue', or asks to document a defect for handoff.
原文の言語: 英語
Use this skill when the user wants to curate the SATK library knowledge index for a Simulink project — mark commonly used blocks, correct auto-assigned block categories, or improve block descriptions so the model-building agent picks better blocks from custom…
原文の言語: 英語
Building or editing Simulink (.slx) models that stream signals in frames using DSP System Toolbox — audio, vibration, radar, comms. Use when the prompt names a Simulink block (Discrete FIR Filter, Buffer, Unbuffer, Rate Transition, Downsample, Upsample,…
原文の言語: 英語
Build motor control solutions using Motor Control Blockset for PMSM, induction motors, BLDC, and SynRM. Implement field oriented control, sensorless FOC, six-step control, speed control, current control, and torque control. Configure SVPWM, flux weakening,…
原文の言語: 英語
Author or upgrade Model Advisor checks for Simulink and System Composer models. Covers the full lifecycle: guideline authoring, check specification, Model Advisor check implementation, and qualification testing. Use when creating new checks (edit-time,…
原文の言語: 英語
Converts a double-precision Simulink system or subsystem to single precision using DataTypeWorkflow.Single (Fixed-Point Designer). The single conversion replaces all user-specified double-precision data types, as well as output data types that compile to…
原文の言語: 英語
Configures Simulink simulations non-destructively using SimulationInput objects — parameter overrides without modifying the model, batch sweeps via parsim, custom input signals via Dataset, and simulation data retrieval via logsout. Use when running…
原文の言語: 英語
Specify algorithms for Model-Based Design: system specs, architecture specs, implementation plans, test plans. Use when creating specifications for controllers, signal processing, diagnostics, estimators, or other algorithms authored in Simulink, Stateflow,…
原文の言語: 英語
Specify plant models for closed-loop simulation: system specs, architecture, build plans, validation plans. Use when creating, updating, or reviewing plant model specifications, planning plant model architecture, or planning plant model validation.
原文の言語: 英語
Use when integrating legacy code, custom code, or C/C++ code into Simulink via C Function blocks. Configure Simulink C Function blocks programmatically using the SymbolSpec API. TRIGGER when the user: - Asks about calling or wrapping C/C++ code or libraries…
原文の言語: 英語
Synthesize new waveforms from scratch for Simulink inports using createInputDataset. Use ONLY when the user asks to generate, create, or synthesize signals (step, ramp, sine, chirp, pulse, noise) to populate a Dataset for External Inputs or Signal Editor.…
原文の言語: 英語
README を読み込めませんでした。リポジトリの Skill 一覧は下で引き続き確認できます。