provision-node
Build, flash, and provision an ESP32-S3/C6 CSI node for RuView — firmware variant choice, cross-platform checksum-verified esptool flashing, NVS/WiFi/channel/MAC-filter overrides, boot-log evidence.
Datos de origen
- Repositorio
- ruvnet/RuView
- Última actividad en el origen
- 30 de septiembre de 2026 a las 16:47
- Idioma detectado de SKILL.md
- inglés
- Estrellas
- 96.481
- Forks
- 12.703
Opciones de instalación
De forma predeterminada está seleccionado el prompt que primero revisa el origen. Puedes cambiar a un comando directo o descargar una copia local.
Revisa los archivos de origen
Lee SKILL.md y los archivos complementarios que muestra SkillsMP antes de decidir si quieres instalarlo.
Mostrando SKILL.md
SKILL.md
Instrucciones de origen · Vista previa de solo lectura- name
- provision-node
- description
- Build, flash, and provision an ESP32-S3/C6 CSI node for RuView — firmware variant choice, cross-platform checksum-verified esptool flashing, NVS/WiFi/channel/MAC-filter overrides, boot-log evidence.
# provision-node
Bring an ESP32 sensing node online.
## 1. Pick a firmware variant
- **s3-8mb** (display build) — ESP32-S3 N16R8 / 16MB; AMOLED optional. The display-detect
fix (#1000) means a *bare* board still captures CSI (MGMT+DATA).
- **s3-4mb** (no-display) — ESP32-S3 4MB; dual-OTA, display disabled.
- **c6** — ESP32-C6 + Seeed MR60BHA2 (60 GHz mmWave + WiFi CSI). The mmwave probe
requires a validated MR60 header (#1107) so an empty UART never false-detects.
Prebuilt binaries: GitHub release `v0.8.1-esp32` (hardware-validated on S3 QFN56 rev v0.2).
## 2. Flash
Use a release flash bundle (or `release_bins/<variant>`, or an ESP-IDF `build/`).
The harness flashes on Windows, macOS, and Linux through `python -m esptool`:
```
npx @ruvnet/ruview doctor --group python,serial,firmware # esptool, pyserial, ports, bundle checksums
npx @ruvnet/ruview flash-plan --port <PORT> --bundle <dir> --variant s3-8mb
npx @ruvnet/ruview flash --port <PORT> --bundle <dir> --variant s3-8mb --confirm
```
`flash` verifies SHA256SUMS, refuses a chip that does not match the variant
(`esptool chip_id`), writes 0x0 / 0x8000 / 0xf000 / 0x20000 (NVS preserved),
then captures a boot log. `hardwareValidated: true` requires CSI callbacks in
that log. Over MCP, `ruview_node_flash` needs the `hardware-write` grant and
`confirm: true`.
Building from source still uses ESP-IDF v5.4 (Docker or the Windows subprocess
flow; Git Bash/MSYS is unsupported, so strip `MSYSTEM*` env vars).
## 3. Provision
```
python firmware/esp32-csi-node/provision.py --port <PORT> \
--ssid "<SSID>" --password "<secret>" --target-ip <server-ip> --target-port 5005
# optional ADR-060 overrides:
python firmware/esp32-csi-node/provision.py --port <PORT> --channel 6 --filter-mac AA:BB:CC:DD:EE:FF
```
Never echo or commit the WiFi password.
## 4. Confirm CSI is flowing
`ruview_node_monitor {port}` — PASS criteria: serial shows `CSI cb #...` callbacks and
(on a bare board) `CSI filter upgraded to MGMT+DATA`. No callbacks → the node isn't
capturing; do not proceed to calibration.
Ver en GitHub