메뉴
Build, flash, and provision an ESP32-S3/C6 CSI node for RuView — firmware variant choice, ESP-IDF Windows-subprocess flow, NVS/WiFi/channel/MAC-filter overrides.
Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.
SOC 직업 분류 기준
Run the ADR-151 per-room calibration pipeline — baseline → enroll → extract → train → a bank of small specialists (presence/posture/breathing/heartbeat/restlessness/anomaly).
Zero-to-sensing path picker for RuView (WiFi-DensePose) — pick docker-demo, repo-build, or live-esp32 and run the next concrete step.
Train/evaluate WiFi pose models honestly — camera-supervised (MediaPipe + CSI) and camera-free (WiFlow), always checked against the mean-pose baseline before any PCK is quoted.
Prove a RuView result is real — run the deterministic SHA-256 proof and the witness bundle (ADR-028), and lint any claim for MEASURED-vs-CLAIMED honesty.
Explore and prototype rvAgent + RVF integration for RuView agentic flows. Use when working on cross-cog coordination, operator-facing agents reading BFLD / pose / vitals events live, or persisting agent state alongside sensing data in the same RVF container.
Advanced RuView capabilities — RuvSense multistatic sensing (attention-weighted fusion, geometric diversity, persistent field model), cross-viewpoint fusion across multiple nodes, RF tomography (ISTA L1 solver, voxel grids), longitudinal biomechanics drift, pre-movement intention signals, adversarial signal detection, and multistatic mesh security hardening. Use for research-grade or multi-node deployments.
| name | provision-node |
| description | Build, flash, and provision an ESP32-S3/C6 CSI node for RuView — firmware variant choice, ESP-IDF Windows-subprocess flow, NVS/WiFi/channel/MAC-filter overrides. |
Bring an ESP32 sensing node online.
Prebuilt binaries: GitHub release v0.8.1-esp32 (hardware-validated on S3 QFN56 rev v0.2).
ESP-IDF v5.4 on Windows is subprocess-only (Git Bash/MSYS is unsupported — strip
MSYSTEM* env vars). Offsets for the S3 image:
esptool --chip esp32s3 -p <PORT> -b 460800 write_flash \
0x0 bootloader.bin 0x8000 partition-table.bin \
0xf000 ota_data_initial.bin 0x20000 esp32-csi-node-s3-8mb.bin
(ruview.node_flash returns the exact pinned command rather than running an
unattended flash.)
python firmware/esp32-csi-node/provision.py --port <PORT> \
--ssid "<SSID>" --password "<secret>" --target-ip <server-ip> --target-port 5005
# optional ADR-060 overrides:
python firmware/esp32-csi-node/provision.py --port <PORT> --channel 6 --filter-mac AA:BB:CC:DD:EE:FF
Never echo or commit the WiFi password.
ruview.node_monitor {port} — PASS criteria: serial shows CSI cb #... callbacks and
(on a bare board) CSI filter upgraded to MGMT+DATA. No callbacks → the node isn't
capturing; do not proceed to calibration.