alfworld-object-state-modifier

# Instructions Change an object's state (cool, heat, or clean) using a household appliance. You must be holding the target object before executing the state change. ## Workflow 1. **Navigate to appliance:** `go to {appliance}` (e.g., `go to fridge 1`) 2. **Prepare if closed:** If observation says appliance is closed, execute `open {appliance}` -- verify it opens 3. **Execute state change:** `{action} {obj} with {appliance}` -- verify observation confirms the change 4. **Proceed:** Continue with the next task step (e.g., placing the modified object) ## Action Mapping | State Change | Action | Typical Appliance | |---|---|---| | Cool | `cool {obj} with {appliance}` | `fridge 1` | | Heat | `heat {obj} with {appliance}` | `microwave 1`, `stoveburner 1` | | Clean | `clean {obj} with {appliance}` | `sinkbasin 1` | ## Error Recovery - "Nothing happened": Check (1) you are holding the object, (2) appliance is open/ready, (3) object and appliance names are correct - Appliance occupied: remove existing items first with `take {item} from {appliance}` ## Example **Scenario:** You need to cool a tomato using the fridge. ``` Thought: I'm holding tomato 1 and need to cool it. I'll go to the fridge. Action: go to fridge 1 Observation: The fridge 1 is closed. Action: open fridge 1 Observation: You open the fridge 1. The fridge 1 is open. In it, you see a lettuce 1. Action: cool tomato 1 with fridge 1 Observation: You cool the tomato 1 using the fridge 1. ``` **Result:** The tomato is now in a cooled state. Proceed with the next task step (e.g., placing it on a countertop).