alfworld-object-state-modifier
Uses an appliance to change the state of an object (cooling, heating, or cleaning). Use when the task requires altering an object's temperature or cleanliness using a specific device (e.g., cooling with a fridge, heating with a microwave, cleaning with a sinkbasin). Takes the object, target state, and appliance as inputs and executes the corresponding modifier action.
来源信息
- 仓库
- zjunlp/SkillNet
- 最近来源活动
- 2026年3月16日 16:23
- 检测到的 SKILL.md 语言
- 英语
- 星标
- 1,412
- 分支
- 152
安装方式
默认使用会先检查来源的 Prompt；你也可以切换为直接命令，或下载本地副本。
检查来源文件
决定是否安装前，请先阅读 SKILL.md，以及 SkillsMP 当前展示的配套文件。
文件资源管理器
2 个文件正在显示 SKILL.md
SKILL.md
来源说明 · 只读预览- name
- alfworld-object-state-modifier
- description
- Uses an appliance to change the state of an object (cooling, heating, or cleaning). Use when the task requires altering an object's temperature or cleanliness using a specific device (e.g., cooling with a fridge, heating with a microwave, cleaning with a sinkbasin). Takes the object, target state, and appliance as inputs and executes the corresponding modifier action.
# Instructions
Change an object's state (cool, heat, or clean) using a household appliance. You must be holding the target object before executing the state change.
## Workflow
1. **Navigate to appliance:** `go to {appliance}` (e.g., `go to fridge 1`)
2. **Prepare if closed:** If observation says appliance is closed, execute `open {appliance}` -- verify it opens
3. **Execute state change:** `{action} {obj} with {appliance}` -- verify observation confirms the change
4. **Proceed:** Continue with the next task step (e.g., placing the modified object)
## Action Mapping
| State Change | Action | Typical Appliance |
|---|---|---|
| Cool | `cool {obj} with {appliance}` | `fridge 1` |
| Heat | `heat {obj} with {appliance}` | `microwave 1`, `stoveburner 1` |
| Clean | `clean {obj} with {appliance}` | `sinkbasin 1` |
## Error Recovery
- "Nothing happened": Check (1) you are holding the object, (2) appliance is open/ready, (3) object and appliance names are correct
- Appliance occupied: remove existing items first with `take {item} from {appliance}`
## Example
**Scenario:** You need to cool a tomato using the fridge.
```
Thought: I'm holding tomato 1 and need to cool it. I'll go to the fridge.
Action: go to fridge 1
Observation: The fridge 1 is closed.
Action: open fridge 1
Observation: You open the fridge 1. The fridge 1 is open. In it, you see a lettuce 1.
Action: cool tomato 1 with fridge 1
Observation: You cool the tomato 1 using the fridge 1.
```
**Result:** The tomato is now in a cooled state. Proceed with the next task step (e.g., placing it on a countertop).
在 GitHub 查看