メニュー
Establish a working SSH connection to the H15 SBC over ethernet. Use when the user asks to connect to the board or set up board access. Default is root@10.0.0.1, password `root`.
デフォルトでは、最初にソースを確認する Prompt が選択されています。直接コマンドに切り替えるか、ローカルコピーをダウンロードすることもできます。
インストールを決める前に、SKILL.md と SkillsMP に表示されている付属ファイルをお読みください。
Codex または Claude でインストール この Prompt をコピーして Codex、Claude、または他のアシスタントに貼り付けると、Skill ページを確認してインストールできます。
直接コマンドでは確認用 Prompt が省略されます。実行前にソースを確認してください。
npx skills add https://github.com/hailo-ai/hailo-media-library --skill connectコマンドは1行のまま表示されます。コピー前に横へスクロールして全体を確認してください。
ローカルで確認しますか？SkillsMP が現在取得できるファイルをダウンロードできます。
Add, modify, or remove AI analytics overlay (bboxes, masks, landmarks, etc.) on a hailo-media-library encoded stream. Two paths — (A) board-side burn-in via OverlayStage, (B) host-side drawing by analytic_viewer. Use when the user asks for any analytics overlay or "see the bboxes/masks/landmarks". MUST ask whether the overlay should be drawn on board (burned into UDP stream) or on host (display-only by analytic_viewer) before proceeding.
Add a new output stream (sinkN) to a hailo-media-library app — resolution, framerate, and encoder. Use when the user asks "add another stream", "add an FHD/4K/HD output", or "I need a Nth video output". Edits application_settings.json + the active profile JSON, generates per-sink encoder/osd/masking files, and pushes to the board.
Snapshot the H15 SBC's runtime health — chip temperature, power consumption, CPU load, DRAM use, NN core utilization, DSP utilization, and the running app's PID. Use when the user asks "is the board OK", "is it overheating", "how loaded is the chip", "why is FPS low", or before/after a long demo to check how hot it's running and how much it's drawing. Read-only over SSH; no app restart.
SOC 職業分類に基づく
SKILL.md を表示中
| name | connect |
| description | Establish a working SSH connection to the H15 SBC over ethernet. Use when the user asks to connect to the board or set up board access. Default is root@10.0.0.1, password `root`. |
| tools | Bash, Read |
Get the user to a state where ssh root@10.0.0.1 works over ethernet. The board's default IP is 10.0.0.1 on the 10.0.0.0/24 subnet; the host should be 10.0.0.2. Default credentials are root / root.
Probe the board.
ssh -o ConnectTimeout=3 -o StrictHostKeyChecking=no root@10.0.0.1 'uname -a; cat /etc/os-release'
At the prompt, enter password root. uname -a returns the kernel string and /etc/os-release shows the Hailo SW version (e.g. 1.11.0) — the H15L SBC quickstart §2.3 uses os-release as the canonical version check. Save the IP for the session.
If it hangs, returns No route to host, or Connection refused, go to step 2.
Check ethernet link and host IP.
ip -br addr — the host needs an interface with 10.0.0.2/24. If not, go to step 3.ping -c 2 10.0.0.1 — board reachable?Set the host's static IP (only if ip -br addr shows no 10.0.0.x interface). Either the GUI or nmcli works — both edit the same NetworkManager connection and persist across reboots.
CLI:
# find the wired connection name (usually "Wired connection 1")
nmcli -t -f NAME,TYPE connection show | grep ethernet
# apply manual IPv4 (replace <name> with the value from above)
nmcli connection modify "<name>" ipv4.method manual ipv4.addresses 10.0.0.2/24 ipv4.gateway ""
nmcli connection up "<name>"
GUI: GNOME Settings → Network → Wired (gear icon) → IPv4 → Manual, Address 10.0.0.2, Netmask 255.255.255.0, Gateway empty → Apply.
Then re-probe.
Linux hailo15l … aarch64 from uname -a. The H15H reports hailo15h. Use this to confirm board type.ssh root@10.0.0.1 'echo OK' returns OK (after entering password root). Report the board IP and uname -a back to the user.