メニュー
Use when creating a reusable DAW mix template to streamline session setup, ensure consistent signal flow, and apply proven mix architecture
デフォルトでは、最初にソースを確認する Prompt が選択されています。直接コマンドに切り替えるか、ローカルコピーをダウンロードすることもできます。
インストールを決める前に、SKILL.md と SkillsMP に表示されている付属ファイルをお読みください。
Codex または Claude でインストール この Prompt をコピーして Codex、Claude、または他のアシスタントに貼り付けると、Skill ページを確認してインストールできます。
直接コマンドでは確認用 Prompt が省略されます。実行前にソースを確認してください。
npx skills add https://github.com/jeffreytse/grimoire-hub --skill design-mixing-templateコマンドは1行のまま表示されます。コピー前に横へスクロールして全体を確認してください。
ローカルで確認しますか？SkillsMP が現在取得できるファイルをダウンロードできます。
SKILL.md を表示中
| name | design-mixing-template |
| description | Use when creating a reusable DAW mix template to streamline session setup, ensure consistent signal flow, and apply proven mix architecture |
| source | Owsinski "The Mixing Engineer's Handbook" (2017, 4th ed.); AES (Audio Engineering Society) mixing standards; Pensado's Place professional mixing methodology |
| tags | ["music-mixing","daw-template","signal-flow","music-production"] |
| verified | true |
Build a reusable DAW mix template that standardizes signal flow, bus architecture, and processing chains to enable faster, more consistent mixing.
Adopted by: Professional mixers (Chris Lord-Alge, Andrew Scheps, Serban Ghenea) all use established templates; AES mixing standards underpin professional studio practice; Owsinski's "Mixing Engineer's Handbook" is the most widely used mixing reference (used at Berklee, Full Sail, and SAE schools worldwide). Impact: A well-designed mix template reduces session setup time by 60–80%; consistent bus architecture enables recall and continuation of mixes across sessions; template-based workflows reduce signal routing errors that are a primary source of phase and level issues. Why best: A mix template embeds accumulated professional knowledge into a repeatable structure — rather than recreating the same decisions for every session, the template starts the mix at a professional baseline, allowing focus on the creative decisions specific to each track.
Sources: Owsinski "The Mixing Engineer's Handbook" 4th ed. (2017); Izhaki "Mixing Audio: Concepts, Practices and Tools" 3rd ed. (2017); Pensado's Place interview series with professional mix engineers.
Define the bus architecture — establish the primary mix buses: Drums Bus, Bass Bus, Instruments Bus (keyboards, guitars), Vocal Bus (lead and backing), FX Returns Bus (reverbs, delays), and Master Bus. Route all channel strips to their appropriate bus before the master. This creates a hierarchical mixing structure.
Create channel strip groups — build channel strip groups for each instrument family: Drum Kit group (kick, snare, toms, overheads, room), Bass group, Electric Guitar group, Acoustic group, Keys group, Lead Vocal, Backing Vocal group. Color-code each group consistently (e.g., purple = drums, green = bass, yellow = guitars).
Set up parallel compression bus — create a dedicated parallel compression bus for drums: route the drum bus to both the normal signal path and a heavily compressed parallel channel (New York compression technique). Blend in to taste. This is a standard professional technique for drum punch.
Install bus processing chains — on each subgroup bus, insert a standard processing chain: high-pass filter → subtractive EQ → gentle saturation or glue compression. These are starting points, not final settings. The goal is to establish a processing framework that can be adjusted, not a rigid sound.
Create reverb and delay return channels — build dedicated FX return channels: Room Reverb (short, 0.5–1.5 seconds), Hall Reverb (long, 2–4 seconds), Plate Reverb (medium, for vocals), Slap Delay (50–120ms), Eighth-Note Delay (tempo-synced), Quarter-Note Delay (tempo-synced). Send from any channel to any FX return via post-fader sends.
Set up the master bus chain — insert the master bus processing chain: subtractive EQ → gentle glue compression (2:1 ratio, 2–4dB GR) → harmonic saturation → metering (LUFS integrated, true peak, dynamic range). Do NOT insert a limiter in the mix template — limiters belong in mastering.
Configure monitoring and metering — establish a reference monitoring level (typically 79–83 dBSPL for professional mixing per Bob Katz K-System). Insert a metering plugin on the master output: LUFS integrated (target −18 LUFS for mix, −14 LUFS for streaming delivery), true peak (−1 dBTP), and dynamic range (DR > 8 for mixes). Include an A/B reference track channel for comparison.
Build a VCA (fader group) structure — create VCA fader groups that allow simultaneous level adjustment of multiple channels: All Drums VCA, All Instruments VCA, All Vocals VCA, All FX VCA. VCA grouping allows one fader movement to control the relative balance of a complete section.
Save default plugin settings — for each processor in the template, save sensible starting presets: HPF at 80Hz for most non-bass channels, compressor at 4:1 ratio / slow attack / fast release as a starting point, EQ with a broad 3dB boost at the "air" frequency for each channel type. These accelerate setup.
Version and document the template — save the template with a version number and date (MixTemplate_v2.3_2024). Document: purpose of each bus, default sends and levels, and any unusual routing. Update the template when your workflow evolves; maintain previous versions.
