Manusで任意のスキルを実行
ワンクリックで

ワンクリックでManusで任意のスキルを実行

ラジオ・携帯・鉄塔機器設置・修理工

設置・維持・修理職 · 職務スキル・コンピテンシー · SOC 49-2021 · 3 件の skills

並び替え

▶O*NET の 3 件の代表的タスク

Inspect completed work to ensure all hardware is tight, antennas are level, hangers are properly fastened, proper support is in place, or adequate weather proofing has been installed.
Run appropriate power, ground, or coaxial cables.
Test operation of tower transmission components, using sweep testing tools or software.

タスクデータは USDOL/ETA の O*NET® 29.1 Database から抜粋し、CC BY 4.0 に基づき使用しています。

modbender/skill-library-mcp

Monitor and control AllStar Link amateur radio nodes via REST API

radio-tower-technician

wonsukchoi/domain-experts

Use when a task needs senior radio/cellular/tower-technician judgment — deciding whether an RF power-down authorization from a carrier NOC (network operations center) is actually sufficient before a climber works near a live antenna, validating a tower-specific rescue plan before a climb, diagnosing a failed VSWR or PIM reading after antenna installation, or triaging an obstruction-light outage against the FAA notification clock.

nictui-radio-cli

Use when a user wants an AI to inspect or modify a TD-H3 radio through the installed `nictui` command-line interface. This skill must use the NicTUI CLI only, requires NicSure mod firmware on the radio, prefers focused single-record updates over bulk writes, creates backups before changes, runs `--validate-only` before real writes, and verifies the result after changes.

全 3 件の skills を読み込みました

ワンクリックで任意のスキルを実行