Run any Skill in Manus
with one click

Run any Skill in Manus with one click

Radio, Cellular, and Tower Equipment Installers and Repairers

Installation, Maintenance, and Repair Occupations · Job Skills & Competencies · SOC 49-2021 · 3 skills

Sort by

▶3 typical tasks from O*NET

Inspect completed work to ensure all hardware is tight, antennas are level, hangers are properly fastened, proper support is in place, or adequate weather proofing has been installed.
Run appropriate power, ground, or coaxial cables.
Test operation of tower transmission components, using sweep testing tools or software.

Task data excerpted from the O*NET® 29.1 Database (USDOL/ETA) and used under CC BY 4.0.

modbender/skill-library-mcp

Monitor and control AllStar Link amateur radio nodes via REST API

radio-tower-technician

wonsukchoi/domain-experts

Use when a task needs senior radio/cellular/tower-technician judgment — deciding whether an RF power-down authorization from a carrier NOC (network operations center) is actually sufficient before a climber works near a live antenna, validating a tower-specific rescue plan before a climb, diagnosing a failed VSWR or PIM reading after antenna installation, or triaging an obstruction-light outage against the FAA notification clock.

nictui-radio-cli

Use when a user wants an AI to inspect or modify a TD-H3 radio through the installed `nictui` command-line interface. This skill must use the NicTUI CLI only, requires NicSure mod firmware on the radio, prefers focused single-record updates over bulk writes, creates backups before changes, runs `--validate-only` before real writes, and verifies the result after changes.

All 3 skills loaded

Run any Skill with one click