원클릭으로 Manus에서 모든 스킬 실행

시작하기

home-control

스타3

포크0

업데이트2026년 4월 16일 03:37

Controls smart home devices (lights, switches, climate, media) via Home Assistant and other providers.

설치

Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.

Manus에서 실행

출처

yuga-hashimoto

yuga-hashimoto/open-dash

GitHub 저장소 열기 Creator 저장소 보기

다운로드

Manus에서 실행

Home Control Skill

When the user asks to control devices at home, follow these steps:

First call get_rooms or get_devices_by_room / get_devices_by_type to discover what's available.
Match the user's natural-language reference (e.g. "the bedroom light") to a concrete device id.
Call execute_command with the device id and desired action.
Confirm the action briefly in speech (e.g. "Turned off the bedroom light").

Best practices

Prefer get_device_state before executing a command when you are unsure of current state.
When the user says "all lights", filter by type "light" and iterate, or use the scene/group if available.
When a command may have been issued already, avoid duplicating it.
If no matching device is found, tell the user exactly which rooms/devices you saw.

Error handling

If a provider is offline, try another provider (HomeAssistant → SwitchBot → MQTT) when possible.
Report errors in plain language, not technical details.

이 저장소의 다른 Skills

같은 저장소

termux-automation

yuga-hashimoto/open-dash

Run shell commands through the user's Termux app when no first-class tool fits — e.g. "git status in my project folder", "list downloads", "run ffmpeg on this file". Only used when the user has opted in under Settings → Advanced → Termux shell access.

2026-04-213

remind-me-tomorrow

yuga-hashimoto/open-dash

Capture "remind me tomorrow to X" into a dated memory entry the morning-briefing surface will read back automatically.

2026-04-173

sick-day

yuga-hashimoto/open-dash

Gentle rest mode for when the user is unwell — dim lights, low volume, quiet hours, and a single hydration reminder every two hours without lecturing.

2026-04-173

where-did-i-put-it

yuga-hashimoto/open-dash

Finds a misplaced item by searching the user's memory store for prior "I put X in Y" statements; if nothing matches, offers to remember the current location instead.

2026-04-173

leaving-home

yuga-hashimoto/open-dash

Quick send-off when the user is leaving — lights out, low-battery reminder, optional weather preview, all inside a single calm sentence.

2026-04-173

arrival-home

yuga-hashimoto/open-dash

Warm welcome when the user gets home — lights up the entry, says hi, and recaps the next calendar event plus any urgent notifications in one short line.

2026-04-173

name	home-control
description	Controls smart home devices (lights, switches, climate, media) via Home Assistant and other providers.

Home Control Skill

When the user asks to control devices at home, follow these steps:

First call get_rooms or get_devices_by_room / get_devices_by_type to discover what's available.
Match the user's natural-language reference (e.g. "the bedroom light") to a concrete device id.
Call execute_command with the device id and desired action.
Confirm the action briefly in speech (e.g. "Turned off the bedroom light").

Best practices

Prefer get_device_state before executing a command when you are unsure of current state.
When the user says "all lights", filter by type "light" and iterate, or use the scene/group if available.
When a command may have been issued already, avoid duplicating it.
If no matching device is found, tell the user exactly which rooms/devices you saw.

Error handling

If a provider is offline, try another provider (HomeAssistant → SwitchBot → MQTT) when possible.
Report errors in plain language, not technical details.