unity-physicscore2d-queries

name

unity-physicscore2d-queries

description

Patterns for single-shot Unity PhysicsCore2D queries — raycasts (sight lines, ground checks, bullet hit-tests), overlap tests (trigger zones, AOE damage, ground checks), shape casts (projectile sweeps), distance/closest-point queries (AI awareness), and time-of-impact tests. Covers QueryFilter setup, layer masking, sorting hits, and the geometry-vs-world variants. For bulk/batched queries see unity-physicscore2d-batching. For full member API see unity-physicscore2d-queries-api.

Unity PhysicsCore2D — Query Patterns

Most physics gameplay logic is built from a handful of query primitives: cast a ray, overlap a shape, find the closest point. PhysicsCore2D exposes these on PhysicsWorld (world queries) and on individual *Geometry types (shape-vs-shape tests).

For the full type/method API surface (every overload, signature, and XML doc), see unity-physicscore2d-queries-api. For batched / job-based queries see unity-physicscore2d-batching. This skill focuses on single-shot patterns.

Quick decision rules

Need	Tool
"What's directly between A and B?"	world.CastRay
"Is anything inside this circle/box right now?"	world.OverlapShape (or OverlapAABB for axis-aligned boxes)
"Will this projectile hit anything if it moves like this?"	world.CastShape (sweep)
"How far is the nearest enemy?"	world.OverlapShape with a search radius + iterate
"Will these two specific shapes collide if A moves?"	Geometry-level CastShape on the input geometry
"Just give me a yes/no, no contact info"	world.TestOverlap* (cheaper than full overlap)
"Bulk-query 1000 rays in parallel"	See unity-physicscore2d-batching

QueryFilter — always set one explicitly

Almost every query takes a PhysicsQuery.QueryFilter. Defaults match everything; you almost always want to narrow it:

using Unity.U2D.Physics;

// Match every shape in every category — fastest to set up, broadest hit set.
var everything = PhysicsQuery.QueryFilter.Everything;

// Same semantics but expressed as the default constant:
var def = PhysicsQuery.QueryFilter.defaultFilter;

// Narrow filter: "I am a Mover (bit 1), hit only Static (bit 0) and Dynamic (bit 2)".
// categories   = what category *this query* belongs to (used by the other side's hitCategories).
// hitCategories = which categories I am willing to detect.
var moverFilter = new PhysicsQuery.QueryFilter
{
    categories    = new PhysicsMask(1),                            // MoverBit
    hitCategories = new PhysicsMask(0) | new PhysicsMask(2)        // StaticBit | DynamicBit
};

// Three-arg constructor — provide all three fields explicitly.
var customFilter = new PhysicsQuery.QueryFilter(
    categories:    PhysicsMask.All,
    hitCategories: new PhysicsMask(3),   // only "destructible" layer
    ignoreFilter:  default);

Source: PhysicsQueryJob.cs (PhysicsQuery.QueryFilter.Everything), CharacterMover.cs (categories/hitCategories pattern), queries-api/SKILL.md (field list).

Cost: filtering happens early in the broadphase, so a tight filter is dramatically cheaper than processing every hit and discarding most.

Pattern 1 — Sight line (raycast)

"Can A see B without walls in the way?"

using Unity.U2D.Physics;

// Build the ray: origin + translation vector (not a direction — it is the full displacement).
// CastRayInput.FromTo(from, to) is a convenience alternative to the constructor.
var rayInput = new PhysicsQuery.CastRayInput(origin: eyePosition, translation: targetPosition - eyePosition);
// -- or --
var rayInput2 = PhysicsQuery.CastRayInput.FromTo(eyePosition, targetPosition);

// Fire. WorldCastMode.Closest returns only the nearest hit and is cheapest for sight-line tests.
// "using" disposes the NativeArray automatically (Allocator.Temp is default).
using var results = world.CastRay(
    rayInput,
    PhysicsQuery.QueryFilter.Everything,
    PhysicsQuery.WorldCastMode.Closest);

bool canSee = results.Length == 0;   // no hit = clear line of sight

if (!canSee)
{
    var hit = results[0];             // WorldCastResult
    Vector2 hitPoint  = hit.point;   // world-space contact point
    Vector2 hitNormal = hit.normal;  // surface normal pointing away from the hit shape
    float   fraction  = hit.fraction; // 0 = at origin, 1 = at full translation end
    var     hitShape  = hit.shape;    // PhysicsShape that was struck
}

Source: CastRayQuery.cs (exact pattern), Slicing.cs (CastRayInput struct literal + QueryFilter with hitCategories), world-api/SKILL.md (CastRay signature), queries-api/SKILL.md (WorldCastResult fields, CastRayInput fields).

hit.fraction is in 0..1 along the cast (0 = origin, 1 = full distance). hit.point is the world-space hit; hit.normal is the surface normal.

Pattern 2 — Ground check (overlap)

A small overlap test at the character's feet is more reliable than a single raycast (which can fall through gaps between ground shapes):

using Unity.U2D.Physics;

// A small circle placed at the character's feet (world-space center).
// CircleGeometry is a value type — cache it as a field so it isn't rebuilt every frame.
var feetCircle = new CircleGeometry
{
    center = (Vector2)transform.position + Vector2.down * 0.55f,
    radius = 0.25f
};

// Only hit "ground" category (bit 0). If you have multiple ground layers, OR them together.
var groundFilter = new PhysicsQuery.QueryFilter
{
    categories    = PhysicsMask.All,
    hitCategories = new PhysicsMask(0)   // StaticBit / ground layer
};

// TestOverlapGeometry returns bool — no allocation, no hit list.
bool isGrounded = world.TestOverlapGeometry(feetCircle, groundFilter);

// If you need to know *which* shape was touched, use OverlapGeometry instead:
using var hits = world.OverlapGeometry(feetCircle, groundFilter, Unity.Collections.Allocator.Temp);
if (hits.Length > 0)
{
    var groundShape = hits[0].shape;   // WorldOverlapResult.shape
}

Source: PhysicsQueryJob.cs (TestOverlapPoint pattern — same boolean-test idiom), CharacterMover.cs (categories/hitCategories), world-api/SKILL.md (TestOverlapGeometry(CircleGeometry, QueryFilter) and OverlapGeometry(CircleGeometry, QueryFilter, Allocator) signatures).

TestOverlapShape returns a bool — much cheaper than OverlapShape if you don't need the hit list.

Pattern 3 — AOE damage (overlap, iterate)

"Apply damage to everything in this circle."

using Unity.U2D.Physics;

// World-space explosion circle — position it at the blast centre.
var blastCircle = new CircleGeometry
{
    center = blastPosition,
    radius = blastRadius
};

// Hit every category (no friendly-fire filtering needed here).
var aoeFilter = new PhysicsQuery.QueryFilter
{
    categories    = PhysicsMask.All,
    hitCategories = PhysicsMask.All
};

// OverlapGeometry returns a NativeArray<WorldOverlapResult>. Dispose when done.
using var hits = world.OverlapGeometry(blastCircle, aoeFilter, Unity.Collections.Allocator.Temp);

for (int i = 0; i < hits.Length; i++)
{
    var result = hits[i];
    if (!result.isValid)
        continue;

    var hitBody = result.shape.body;
    if (!hitBody.isValid)
        continue;

    // Scale damage by inverse-square falloff from blast centre.
    float dist = Vector2.Distance(blastPosition, hitBody.position);
    float damage = maxDamage * (1f - dist / blastRadius);

    ApplyDamage(hitBody, damage);
}

Source: TestShadowRegion.cs (world.OverlapGeometry(polygonGeometry, QueryFilter, allocator) — exact call pattern), SpriteDestruction.cs (OverlapPoint with category filter — same idiom for geometry), world-api/SKILL.md (OverlapGeometry(CircleGeometry, QueryFilter, Allocator) signature), queries-api/SKILL.md (WorldOverlapResult.shape, WorldOverlapResult.isValid).

Always Dispose the results array (or use using). Allocator.Temp is fastest for per-frame queries.

Pattern 4 — Projectile sweep (shape cast)

For fast-moving projectiles, a single raycast misses thin geometry (tunneling). Cast the actual projectile shape over its movement:

using Unity.U2D.Physics;

// The projectile is a circle of the same radius as the bullet sprite.
// CastGeometry takes a world-space geometry + translation — no separate transform needed.
var bulletCircle = new CircleGeometry
{
    center = projectilePosition,   // already in world-space
    radius = bulletRadius
};

var travelVector = projectileVelocity * Time.fixedDeltaTime;

// Only hit static environment and enemy bodies; ignore friendly bullets (category 3).
var projectileFilter = new PhysicsQuery.QueryFilter
{
    categories    = new PhysicsMask(2),  // projectile category
    hitCategories = new PhysicsMask(0) | new PhysicsMask(1)  // StaticBit | EnemyBit
};

// CastGeometry(CircleGeometry, translation, filter, castMode, allocator)
// WorldCastMode.Closest — only the first hit matters for a bullet.
using var hits = world.CastGeometry(
    bulletCircle,
    travelVector,
    projectileFilter,
    PhysicsQuery.WorldCastMode.Closest);

if (hits.Length > 0)
{
    var hit = hits[0];                       // WorldCastResult
    Vector2 impactPoint  = hit.point;
    Vector2 impactNormal = hit.normal;
    float   travelFrac   = hit.fraction;     // fraction of travelVector covered before impact
    var     hitShape     = hit.shape;

    SpawnImpactVFX(impactPoint, impactNormal);
    hitShape.body.ApplyLinearImpulseToCenter(travelVector.normalized * impactForce);
}

Source: CastGeometryQuery.cs (exact world.CastGeometry(geometry, castTranslation, QueryFilter.Everything) pattern), CharacterMover.cs (CastShapeProxy with category filter — same sweep concept), world-api/SKILL.md (CastGeometry(CircleGeometry, Vector2, QueryFilter, WorldCastMode, Allocator) signature), queries-api/SKILL.md (WorldCastResult fields).

For very high-speed bodies, prefer enabling continuous collision (continuousAllowed on the world plus continuous = true on the body) over manual sweeps — but for one-shot logic (raycasts, hitscan), shape casts are simpler and don't require dedicated bodies.

Pattern 5 — Closest-point query (AI awareness)

"Where is the nearest wall surface to me?"

using Unity.U2D.Physics;

// Given: agentShape is the AI body's PhysicsShape, obstacleShape is the wall PhysicsShape.
// Both shapes must be valid and in the same world.

// CreateShapeProxy() builds a compact ShapeProxy from the shape's current geometry.
var distInput = new PhysicsQuery.DistanceInput
{
    shapeProxyA = agentShape.CreateShapeProxy(),
    transformA  = agentShape.body.transform,       // PhysicsTransform (world pose)
    shapeProxyB = obstacleShape.CreateShapeProxy(),
    transformB  = obstacleShape.body.transform,
    useRadii    = true   // include shape radii in distance — usually what you want
};

// PhysicsQuery.ShapeDistance is a static method — no world reference needed.
PhysicsQuery.DistanceResult dist = PhysicsQuery.ShapeDistance(distInput);

// dist.distance == 0 means the shapes overlap.
if (dist.distance < alertRange)
{
    Vector2 nearestOnAgent    = dist.pointA;   // closest point on agentShape surface
    Vector2 nearestOnObstacle = dist.pointB;   // closest point on obstacleShape surface
    Vector2 separationAxis    = dist.normal;   // unit vector from A toward B (invalid when distance == 0)
}

Source: PhysicsAPIExtensions.cs (exact PhysicsQuery.ShapeDistance(new PhysicsQuery.DistanceInput { shapeProxyA, shapeProxyB, transformA, transformB, useRadii }) pattern — real project code), queries-api/SKILL.md (DistanceInput fields, DistanceResult fields, ShapeDistance signature).

PhysicsQuery.SegmentDistanceResult gives both endpoints' nearest pair on a single line segment, useful for cone-of-vision and beam attacks.

Pattern 6 — Will these two collide if I move? (geometry-level cast)

When you don't want to disturb the world but need to test "if my character moved by delta, would my proposed shape hit this specific obstacle?", use the geometry-level CastShape directly:

using Unity.U2D.Physics;

// Scenario: character controller predicts whether its capsule would collide
// if it moved by `desiredMove`. The capsule geometry is already in world-space.
var capsuleGeometry = new CapsuleGeometry
{
    center1 = characterFeet,           // world-space bottom center
    center2 = characterHead,           // world-space top center
    radius  = 0.4f
};

// CastGeometry on the world accepts a geometry value + translation vector.
// No shape or body is required — pure geometry query.
using var hits = world.CastGeometry(
    capsuleGeometry,
    desiredMove,                        // how far/where to sweep
    new PhysicsQuery.QueryFilter
    {
        categories    = PhysicsMask.All,
        hitCategories = new PhysicsMask(0)  // only static geometry (walls/floors)
    },
    PhysicsQuery.WorldCastMode.Closest);

if (hits.Length > 0)
{
    var hit = hits[0];
    // Slide along the wall instead of stopping dead.
    Vector2 blocked  = hit.normal * Vector2.Dot(desiredMove, hit.normal);
    Vector2 slideDir = desiredMove - blocked;
    desiredMove = slideDir;
}

Source: CastGeometryQuery.cs (world.CastGeometry(geometry, translation, QueryFilter.Everything) — direct match), world-api/SKILL.md (CastGeometry(CapsuleGeometry, Vector2, QueryFilter, WorldCastMode, Allocator) overload), queries-api/SKILL.md (WorldCastResult.normal, WorldCastResult.fraction).

Useful for character controllers that want to test their next step without first creating a shape.

Pattern 7 — Time of impact (precise CCD)

For deterministic "when exactly do these two moving bodies touch?" use PhysicsQuery.TimeOfImpactInput:

using Unity.U2D.Physics;

// Scenario: deterministic bullet-vs-target CCD without a physics body.
// ShapeProxy wraps a geometry type for time-of-impact calculations.
var bulletProxy = new PhysicsShape.ShapeProxy(new CircleGeometry { center = Vector2.zero, radius = bulletRadius });
var targetProxy = new PhysicsShape.ShapeProxy(new CircleGeometry { center = Vector2.zero, radius = targetRadius });

// ShapeSweep describes a body's motion over the CCD interval.
// positionStart/End are world-space centre-of-mass positions.
var bulletSweep = new PhysicsQuery.ShapeSweep
{
    localCOM       = Vector2.zero,
    positionStart  = bulletStartPos,
    positionEnd    = bulletStartPos + bulletVelocity * deltaTime,
    rotationStart  = PhysicsRotate.identity,
    rotationEnd    = PhysicsRotate.identity
};

var targetSweep = new PhysicsQuery.ShapeSweep
{
    localCOM       = Vector2.zero,
    positionStart  = targetStartPos,
    positionEnd    = targetStartPos + targetVelocity * deltaTime,
    rotationStart  = PhysicsRotate.identity,
    rotationEnd    = PhysicsRotate.identity
};

var toiResult = PhysicsQuery.ShapeTimeOfImpact(new PhysicsQuery.TimeOfImpactInput
{
    shapeProxyA  = bulletProxy,
    shapeSweepA  = bulletSweep,
    shapeProxyB  = targetProxy,
    shapeSweepB  = targetSweep,
    maxFraction  = 1f            // search the full interval [0, 1]
});

if (toiResult.impactState == PhysicsQuery.TimeOfImpactResult.State.Hit)
{
    float hitFraction  = toiResult.fraction;  // in [0, maxFraction]
    Vector2 hitPoint   = toiResult.point;
    Vector2 hitNormal  = toiResult.normal;
    // Exact world-space impact position of bullet at moment of contact:
    Vector2 impactPos  = Vector2.Lerp(bulletStartPos, bulletStartPos + bulletVelocity * deltaTime, hitFraction);
}
// Other states: Overlapped (shapes started inside each other), Separated (no hit), Failed, Unknown.

Source: queries-api/SKILL.md (TimeOfImpactInput fields: shapeProxyA, shapeSweepA, shapeProxyB, shapeSweepB, maxFraction; TimeOfImpactResult fields: fraction, impactState, point, normal; State.Hit enum value; ShapeTimeOfImpact static method signature). No real project file uses this method — API-only fallback.

Reach for this for replay systems, deterministic networking, or precise hit-prediction. Overkill for casual gameplay queries.

QueryFilter — common recipes

using Unity.U2D.Physics;

// --- Recipe 1: Hit everything (broadest, cheapest to configure) ---
var hitAll = PhysicsQuery.QueryFilter.Everything;

// --- Recipe 2: Sight-line that sees only solid geometry (ignores triggers/sensors) ---
// Assign category bit 0 to all "solid wall" shapes via PhysicsShape.ContactFilter.categories.
// The query hits shapes whose category mask overlaps hitCategories.
var sightFilter = new PhysicsQuery.QueryFilter
{
    categories    = PhysicsMask.All,
    hitCategories = new PhysicsMask(0)  // solid walls only
};

// --- Recipe 3: Projectile hits enemies AND environment, not other projectiles ---
// PhysicsMask(n) sets bit n. Combine layers with the | operator.
const int envLayer      = 0;
const int enemyLayer    = 1;
const int projectileLayer = 2;
var bulletFilter = new PhysicsQuery.QueryFilter
{
    categories    = new PhysicsMask(projectileLayer),
    hitCategories = new PhysicsMask(envLayer) | new PhysicsMask(enemyLayer)
};

// --- Recipe 4: AOE that hits destructibles and debris ---
var destructibleMask = new PhysicsMask(3);
var debrisMask       = new PhysicsMask(4);
var aoeFilter = new PhysicsQuery.QueryFilter
{
    categories    = PhysicsMask.All,
    hitCategories = destructibleMask | debrisMask
};

// --- Recipe 5: Ignore specific body pairs ---
// world.CreateIgnoreFilter() or use PhysicsWorld.IgnoreFilter to skip particular shape pairs.

 ignoreFilter = world.ignoreFilter;   
 filteredQuery =  PhysicsQuery.QueryFilter
{
    categories    = PhysicsMask.All,
    hitCategories = PhysicsMask.All,
    ignoreFilter  = ignoreFilter
};

Source: PhysicsQueryJob.cs (QueryFilter.Everything), CharacterMover.cs (categories + hitCategories pattern with PhysicsMask constants), Slicing.cs (new PhysicsQuery.QueryFilter { categories = PhysicsMask.All, hitCategories = m_DestructibleMask | m_GroundMask }), SpriteDestruction.cs (category/hitCategory filter on OverlapPoint), queries-api/SKILL.md (QueryFilter field list).

Sorting and limiting hits

OverlapShape returns hits in broadphase order, not sorted by distance. If you need the closest:

using Unity.U2D.Physics;
using Unity.Collections;

// --- Sort cast hits by distance (closest first) ---
// Use WorldCastMode.AllSorted to get results pre-sorted by ascending fraction.
using var sortedHits = world.CastRay(
    PhysicsQuery.CastRayInput.FromTo(origin, target),
    PhysicsQuery.QueryFilter.Everything,
    PhysicsQuery.WorldCastMode.AllSorted);   // already sorted; index 0 is closest

// --- Sort overlap results manually by distance from a reference point ---
// OverlapGeometry does NOT sort — iterate and track minimum.
var searchCircle = new CircleGeometry { center = searchOrigin, radius = searchRadius };
using var overlapHits = world.OverlapGeometry(searchCircle, PhysicsQuery.QueryFilter.Everything, Allocator.Temp);

PhysicsShape closestShape = default;
float closestDistSq = float.MaxValue;
for (int i = 0; i < overlapHits.Length; i++)
{
    var result = overlapHits[i];
    if (!result.isValid) continue;

    float distSq = ((Vector2)result.shape.body.position - searchOrigin).sqrMagnitude;
    if (distSq < closestDistSq)
    {
        closestDistSq = distSq;
        closestShape  = result.shape;
    }
}

// --- Limit to first hit only ---
// WorldCastMode.Closest stops after the nearest hit — cheapest for "did anything block me?".
using var firstHit = world.CastRay(
    new PhysicsQuery.CastRayInput(origin, direction * maxRange),
    PhysicsQuery.QueryFilter.Everything,
    PhysicsQuery.WorldCastMode.Closest);
bool blocked = firstHit.Length > 0;

Source: Slicing.cs (WorldCastMode.AllSorted — exact usage in a reflection ray loop), CastRayQuery.cs + PhysicsQueryJob.cs (WorldCastMode.Closest), world-api/SKILL.md (OverlapGeometry(CircleGeometry, QueryFilter, Allocator) — 3-arg signature confirmed), queries-api/SKILL.md (WorldCastMode enum values).

For "first hit only", CastRay already returns the nearest along the ray.

Best practices

• Always set a QueryFilter — defaults match everything and are slow.
• Prefer TestOverlap* for boolean checks — half the work of a full Overlap*.
• Use Allocator.Temp for per-frame query results — fastest, auto-freed within the frame.
• Sweep, don't single-raycast, fast objects — single rays miss between fixed-step samples.
• Cache shape geometry — reuse CircleGeometry/CapsuleGeometry value instances rather than allocating per call.
• Run queries during simulation OR between simulations, not both — see WORM rules in unity-physicscore2d umbrella for thread-safety details.

Common pitfalls

• Casting a ray of length 0 — returns empty even if the origin overlaps. Use OverlapPoint for "is this point inside anything?".
• Forgetting hitCategories — QueryFilter.Everything hits triggers and sensors too; narrow hitCategories to exclude them for solid-geometry-only queries.
• Iterating an undisposed OverlapShape result — leaks Temp memory. Use using.
• Treating hit.fraction == 1 as "no hit" — the cast hit at the very end of the translation. 0..1 are all valid hits.
• Querying inside a contact callback while the world is locked — see WORM model.