czml-wall

name	czml-wall
description	CZML walls — vertical surfaces that follow a ground path, with optional per-point minimum/maximum heights. Use when the intent describes a wall, vertical barrier, fence-like surface, or a shape whose top/bottom edge follows a path of varying heights.

CZML Wall

• "wall": { "positions": { "cartographicDegrees": [lon0, lat0, h0, lon1, lat1, h1, ...] }, "material": { "solidColor": { "color": { "rgba": [r,g,b,a] } } }, "outline": true|false, "outlineColor": { "rgba": [r,g,b,a] }, "minimumHeights": [h0, h1, ...], "maximumHeights": [h0, h1, ...], "show": true|false } — a 2D vertical surface following the "positions" line strip.
• By default, each point's own height (the third value in "positions") is the top edge and the surface (height 0) is the bottom edge. To make the top edge itself vary per-point (e.g. an edge that rises and falls along the wall's length), set each position's height to the desired top height directly, or supply "maximumHeights"/"minimumHeights" (one value per position, same order) to control the top/bottom edges independently of "positions"' own heights.

Example: a translucent red zig-zag wall with a rising-and-falling top edge

[
  { "id": "document", "name": "Wall", "version": "1.0" },
  {
    "id": "wall-1",
    "wall": {
      "positions": {
        "cartographicDegrees": [
          -80, 30, 50000, -79.7, 30.3, 10000, -79.4, 30, 50000, -79.1, 30.3, 10000, -78.8, 30, 50000
        ]
      },
      "material": { "solidColor": { "color": { "rgba": [255, 0, 0, 128] } } }
    }
  }
]