| name | project-lock |
| description | Use before making changes in any project or repository, especially when a session reaches outside its starting working directory. Checks for a cooperative project lock, acquires one before writes, chooses wait versus worktree when another agent holds it, renews estimates during long work, and releases locks when leaving. Also use when the user asks which projects are locked, whether a repo is busy, or to clear an abandoned agent lock, and when a person is driving a checkout themselves with an editor open or a test run in flight, where no lock file represents them. |
project-lock
Coordinate agent writes with an advisory lock at the project or Git worktree root.
Non-negotiable rule
Before the first write, mutating command, branch operation, dependency install, formatter, or generated-file update in every project you touch:
- Resolve this skill's
scripts/project-lock.py path.
- Run
python <script> check <target-path>.
- If free, acquire before changing anything.
- If locked, follow the reported advice. Do not edit first and negotiate later.
Reads and non-mutating inspection do not require a lock.
Enforcement
Installations may wire hooks/pre_tool_use.py as PreToolUse hook (matcher Edit|Write|NotebookEdit|Bash). It denies file edits governed by another session's lock and denies unlocked edits with the exact acquire command to run (including --session when the payload carries a session id). Bash commands are split into segments on ;, &, |, and newlines, and each segment is classified independently. Bash calls are denied only when the session's cwd sits in a foreign jurisdiction and the command is not read-only, or when a non-read-only command references an absolute path (including ~- or $VAR-prefixed forms, expanded before comparison) under a registered foreign lock. Modes: PROJECT_LOCK_ENFORCE=deny (default), warn, off. The hook fails open on its own errors. If the hook is not wired and this skill arrived as part of a skill pack, check whether the pack's installer provides a hook offer flow (a command that checks hook registration state and records the user's yes / no / later decision) and use that flow to prompt the user instead of suggesting manual registration, so the user is asked at most once.
Git administration state answers to the governing checkout rather than to whichever lock sits above the path. Refs, config, and the worktree registry are shared by every worktree, so an ordinary worktree lock cannot speak for them. The governing checkout is the one whose .git the path belongs to, which for repository-wide state is the main worktree; holding its lock means being in charge of the repository. A direct file-tool write is:
- allowed when this session holds the governing checkout's lock;
- allowed when nothing anywhere in the repository is locked, since there is no one to coordinate with;
- denied when another session holds the governing checkout;
- denied when the governing checkout is unlocked but another worktree of the repository is locked, so a session working in a linked worktree cannot rewrite shared state out from under whoever else is active. Claim the governing checkout first.
There is deliberately no separate override: acquiring that lock is the way in, which keeps the authority explicit and visible to other agents. That matters because Git offers no command for some legitimate edits - .git/info/exclude and .git/hooks/* have no porcelain equivalent, and a config too malformed for Git to parse cannot be repaired with git config.
The rule covers the common and private Git directories (--git-dir, --git-common-dir) and the .git marker at a worktree root, whose file form repoints the whole worktree. Bash is deliberately excluded: Git itself writes to .git constantly, and a word-level classifier cannot separate that from a raw clobber. The check runs only when a path component ends in .git, so ordinary content edits pay no subprocess cost.
Enforcement of an existing lock applies everywhere: any .agent-lock/ marker governs its jurisdiction whether or not that jurisdiction is a Git checkout. The only carve-out is for unlocked writes with nothing registered anywhere above the target. Those are denied with an acquire recipe by default, including in non-Git project directories, since agents still need to coordinate writes there, except when the target is true scratch: no .git anywhere above it (checked with has_git_ancestor()) and it sits under a recognized system temp location ($TMPDIR or tempfile.gettempdir() everywhere; also /tmp, /private/tmp, and /var/folders off Windows, checked with is_under_temp_dir()). Both conditions must hold: a Git checkout that happens to live under a temp mount (e.g. a test fixture under /tmp) still has its own .git and stays enforced normally.
Known limitations of the scratch carve-out: a stray .git directory above a temp root (e.g. an accidentally created empty ~/.git) makes has_git_ancestor() true for the whole temp tree beneath it, disabling the carve-out there. A symlink inside a real repo that resolves into a temp root is treated as scratch, since path resolution happens before the temp-root comparison. (On the coordination model's limits generally, see "Protocol and limitations" below.)
Enforcement does not cover Bash writes that reach a foreign jurisdiction from outside via relative or quoted paths. Absolute paths containing spaces also escape the token scan, since a quoted space is indistinguishable from a token boundary. Think before you Bash: hold the locks of every jurisdiction your command spans, especially for recursive operations (rm -rf, git clean, formatter sweeps, git add -A).
Unlocked Bash is allowed by design: acquiring a lock itself requires running a command, so the unlocked-write deny only applies to file tools (Edit/Write/NotebookEdit). Bash enforcement engages only against foreign jurisdictions, never against the absence of a lock.
Acquire
Give other agents enough context to decide whether to wait or use a worktree:
python <script> acquire <project-path> \
--reason "fix XYZ and run its focused tests" \
--duration 30s \
--strategy wait
Use:
--strategy wait for a short change or shared-state operation.--strategy worktree when this is the session's main project or lengthy work.--strategy auto when duration alone should decide: up to five minutes recommends waiting; longer recommends a worktree.
--session and --owner-pid are both optional: when omitted, acquire reads a recognized harness environment variable instead (Claude Code sets CLAUDE_CODE_SESSION_ID and CLAUDE_PID; --help lists the full candidate order). Passing either flag explicitly always takes precedence over the environment. This is what lets check/list/watch and the enforcement hook tell your own lock apart from another session of the same user on the same host.
Capture the returned lock id; it proves ownership for renew and release. A Git path resolves to its current worktree root. Separate Git worktrees therefore have separate locks.
When another lock exists
check exits 3 and prints owner, reason, expected completion, branch, and advice.
- wait: use
python <script> wait <path> --timeout 5m, or do unrelated read-only work and check again.
- worktree: create a separate branch and Git worktree. Acquire a lock inside that new worktree before writing there.
- overdue: overdue means the estimate was wrong, not that the lock is free. Contact the owner or ask the user. Force-clear only after verifying the session is abandoned.
Never reuse Git's internal .lock files. git worktree lock prevents pruning; it does not coordinate agent edits.
Keep and release
Renew before the estimate expires:
python <script> renew <path> --lock-id <id> --duration 20m
Release immediately after the last mutation, including on failure or when abandoning the task:
python <script> release <path> --lock-id <id>
For sessions touching multiple projects, track each path and lock id separately. Release all of them before wrapping up.
Watch and override
List once or run the refreshing terminal dashboard:
python <script> list
python <script> watch
After independently verifying a lock is abandoned, the user or supervising agent may clear it:
python <script> release <path> --force \
--expect-lock-id <the id you verified> \
--reason "owner session exited; verified pid gone"
Both flags are required. --reason is recorded; --expect-lock-id is a compare-and-swap. Verifying that a lock is abandoned and then clearing it are two steps, and the lock can turn over in between: naming the id you verified makes the override fail rather than silently discard a replacement. A lock whose owner.json is unreadable has no id to compare, so there --reason alone is the gate.
Every force-clear is appended to audit.jsonl in the per-user state directory before the lock is removed, so an override cannot succeed unaudited. A trail that cannot be written fails the override and leaves the lock standing.
check reports owner pid: <pid> (<state>), where state is one of:
- gone - no such process, or the pid belongs to a different process than the one nominated. Strong evidence of abandonment, and the evidence a force-clear wants.
- running - the nominated process is alive, confirmed against its recorded start identity.
- running-unverified - something holds that pid, but its identity could not be confirmed. Treat as running.
- unknown - no process was nominated (the default), the lock was taken on another host, or this platform cannot answer. Start identity is read on Linux and Windows only.
Liveness is opt-in, and unknown is the default for good reason. acquire fills --owner-pid from a recognized harness environment variable (Claude Code sets CLAUDE_PID) when the flag is omitted; pass it explicitly only to nominate a different durable process, and never the process running the command itself:
python <script> acquire <path> --reason "..." --duration 30m --owner-pid $AGENT_SESSION_PID
The acquire command's own process exits the moment it writes the marker, so recording it would report gone for every healthy lock and invite force-clearing live work. Nominate the agent session or supervising process, or nominate nothing.
On Windows, pass a real Win32 pid. $$ inside Git Bash or MSYS is that shell's own emulated pid from a separate namespace, and probing it reports gone for a perfectly live shell. Python's os.getpid() and PowerShell's $PID give the Win32 value.
Never force-clear merely because expected_until passed. A dead owner process is evidence for your judgement, never an automatic verdict: recommendation deliberately ignores it.
Protocol and limitations
Jurisdiction is the nearest enclosing Git worktree, and covers that worktree's content only. Repository-wide state (refs, config, the worktree registry) is shared by every worktree and belongs to the governing checkout, normally the main worktree; see Enforcement above. A lock governs everything under its root except nested worktrees (their .git boundary stops it), and an ancestor checkout's lock never reaches inside a worktree checked out as a subfolder. check reports related ancestor and nested locks so subtree-wide operations can be cleared manually first.
Acquisition atomically creates <root>/.agent-lock/; metadata lives in owner.json. Git repositories receive a local .git/info/exclude entry so the marker does not dirty status. A per-user SQLite transaction serializes acquire, renew, and release so a stale owner cannot overwrite a replacement lock. The same per-user state directory contains the registry used by list and watch.
This is cooperative coordination, not a security boundary. Filesystems such as NFS, SMB, and cloud-sync folders may weaken atomicity. Use a transactional coordinator with fencing for cross-host deployments or irreversible external operations.
A PreToolUse hook governs the writes a harness represents in tool input, and nothing else. It cannot govern:
- arbitrary shell redirection, or paths a command computes at runtime;
- writes by Python, Node, build tools, test runners, package managers, formatters, or editors;
- subprocesses and background jobs;
- file descriptors opened before the decision, or writable memory mappings;
- link and rename races between the allow decision and the write;
- another terminal, IDE, human, or agent outside the interceptor.
An allow decision is therefore a point-in-time cooperative snapshot, not protection against a racing writer. Do not read it as stronger than that.
A human working in the same checkout is the clearest case, and no lock file represents them. When a person is driving a checkout - an editor open on it, a test run in flight, uncommitted changes you did not make - treat it as held and ask before writing. Absence of a stated handoff is a hold, not permission, and authorization is per-action rather than a standing license: "go ahead, merge it" covers that merge, not the next write an hour later. A clarifying question is cheap; clobbering a live session is not.
Read state, not process presence. Where the person keeps an editor, IDE, or dev server open on the checkout for the whole session, the fact that it is up says nothing about whether they are mid-task, so it is not the signal to key off; their git status plus what they have said this turn is. The obligation also runs the other way. Before starting a long run of your own in a checkout you share with a person - a full build, a batch test suite, anything that leaves the tree inconsistent for minutes at a time - say so and give an estimate ("suite running in my checkout, roughly 20 minutes, please do not edit there until I report back"), so they are not left inferring your state either.
acquire, renew, and release all serialize through one global SQLite file in the per-user state directory (mutation_guard), regardless of which project each call targets. This is a same-user global critical section: two lock mutations for two different projects on the same machine still take turns through that one file. In practice each mutation holds it only briefly, so this is not a throughput concern, but it means lock mutations across all of a user's projects are never truly concurrent.
Works with
- fleet-orchestration treats this skill as its pre-flight check: before dispatching agents across repos, it runs
project-lock.py check <repo> and follows the reported advice, falling back to ad hoc git heuristics only when this skill isn't installed.
- Warm worktree pool slots (see fleet-orchestration's "Persistent warm worktree pools") take this lock on the slot path before an agent writes there, alongside the
.worktree-reserved marker that claims the slot. The two answer different questions: the marker records that a slot is spoken for and survives across sessions, while this lock coordinates the writes. The marker's stale-after window (24h) is an operator hint for reaping the marker only - exactly like expected_until above, an elapsed stale-after does not by itself make the lock safe to force-clear; that still requires independent verification. The marker's full field spec lives with the pool protocol; this repo only cross-references it.
These are consumers layered on top of this skill, not alternative locking mechanisms: this skill is the canonical write-coordination primitive.
