tuya/TuyaOpen-dev-skills

tuyaopen-project-config

Create new TuyaOpen projects and platforms, manage build configurations, update platform dependencies, and use tos.py subcommands. Use when the user mentions creating a project, tos.py new, saving or choosing a config, tos.py update, or general tos.py usage.…

原文语言：英语

tuyaopen-build

Build and compile TuyaOpen projects, select build configurations, edit Kconfig options, clean artifacts, and run Linux ELF binaries. Use when the user mentions compiling, building, tos.py build, config choice, menuconfig, Kconfig, build error, or running a…

原文语言：英语

tuyaopen-cli-debug

Send commands to the TuyaOpen device serial CLI (tal_cli) over UART and capture responses. Use when the user wants to run CLI commands on a connected T5AI, ESP32, T2, T3, or LN882H board — such as sys_reset, kv_dump, fs_ls, or custom registered commands —…

原文语言：英语

tuyaopen-crash-decode

Decode a TuyaOpen firmware crash dump (PC, LR, stack pointers) to source file:line by invoking the right per-platform `addr2line` against the debug ELF. Use when the user pastes a panic log / hard-fault dump containing raw hex code addresses (e.g. "PC:…

原文语言：英语

tuyaopen-debug-helper

Agent-friendly non-blocking serial log capture for TuyaOpen devices. Runs tos.py monitor in the background, writes logs to file, and lets the agent tail or stop it at any time. Use when the agent needs to capture device logs without blocking, run a debug…

原文语言：英语

tuyaopen-dev-loop

Automated build-flash-monitor-analyze development loop for TuyaOpen devices. Covers log analysis, error patterns, CLI testing, and iterative debugging. Use when the user mentions dev loop, automated testing, log analysis, debug cycle, iterative development,…

原文语言：英语

tuyaopen-code-check

>-

原文语言：英语

tuyaopen-env-setup

Set up and activate the TuyaOpen development environment, install system dependencies, and initialize tos.py. Use when the user mentions environment setup, activating the SDK, installing dependencies, export.sh, or when tos.py is not found.…

原文语言：英语

tuyaopen-add-board

Add new board (BSP) support to TuyaOpen, including board directory structure, Kconfig, drivers, and config files. Use when the user mentions adding a board, new board, BSP, board support, hardware adaptation, or tos.py new board. 添加开发板、板级适配、新增BSP、硬件适配。

原文语言：英语

tuyaopen-device-auth

Configure device authorization credentials (UUID, AuthKey, PID) and network provisioning for TuyaOpen devices. Use when the user mentions device auth, authorization, UUID, AuthKey, tuya_config.h, provisioning, pairing, or cloud connection.…

原文语言：英语