菜单
Set up and activate the TuyaOpen development environment, install system dependencies, and initialize tos.py. Use when the user mentions environment setup, activating the SDK, installing dependencies, export.sh, or when tos.py is not found. 环境搭建、环境初始化、激活开发环境、安装依赖。
用 Codex 或 Claude 帮你安装 复制这段 Prompt，粘贴到 Codex、Claude 或其他助手里，让它检查 Skill 页面并帮你完成安装。
基于 SOC 职业分类
Build and compile TuyaOpen projects, select build configurations, edit Kconfig options, clean artifacts, and run Linux ELF binaries. Use when the user mentions compiling, building, tos.py build, config choice, menuconfig, Kconfig, build error, or running a project. 项目编译、构建、编译配置、清理编译、编译错误、menuconfig、Kconfig。
Create new TuyaOpen projects and platforms, manage build configurations, update platform dependencies, and use tos.py subcommands. Use when the user mentions creating a project, tos.py new, saving or choosing a config, tos.py update, or general tos.py usage. 创建项目、新建工程、配置管理、保存配置、选择配置、更新依赖。
Send commands to the TuyaOpen device serial CLI (tal_cli) over UART and capture responses. Use when the user wants to run CLI commands on a connected T5AI, ESP32, T2, T3, or LN882H board — such as sys_reset, kv_dump, fs_ls, or custom registered commands — without opening a foreground monitor. Auto-discovers the USB serial port and platform baud rate. 设备CLI命令、串口命令、tal_cli、kv_dump、sys_reset、串口调试。
Decode a TuyaOpen firmware crash dump (PC, LR, stack pointers) to source file:line by invoking the right per-platform `addr2line` against the debug ELF. Use when the user pastes a panic log / hard-fault dump containing raw hex code addresses (e.g. "PC: 0x021d8e96"). Covers T5AI (BK7258, ARM Cortex-M), ESP32/S3 (Xtensa), T2, T3, LN882H — each ships its own toolchain inside the TuyaOpen tree. 固件崩溃解码、panic、hard fault、PC/LR地址解析、addr2line。
Agent-friendly non-blocking serial log capture for TuyaOpen devices. Runs tos.py monitor in the background, writes logs to file, and lets the agent tail or stop it at any time. Use when the agent needs to capture device logs without blocking, run a debug session, or monitor UART output during a build-flash-analyze loop. 后台串口日志、非阻塞监控、设备日志捕获、agent日志分析。
Automated build-flash-monitor-analyze development loop for TuyaOpen devices. Covers log analysis, error patterns, CLI testing, and iterative debugging. Use when the user mentions dev loop, automated testing, log analysis, debug cycle, iterative development, or CI loop. 开发闭环、自动化测试、日志分析、调试循环、迭代开发。
| name | tuyaopen/env-setup |
| description | Set up and activate the TuyaOpen development environment, install system dependencies, and initialize tos.py. Use when the user mentions environment setup, activating the SDK, installing dependencies, export.sh, or when tos.py is not found. 环境搭建、环境初始化、激活开发环境、安装依赖。 |
| license | Apache-2.0 |
| compatibility | ["Ubuntu/Debian with apt-get (or macOS/Windows equivalent)","Python >= 3.6","git >= 2.0, cmake >= 3.28, make >= 3.0, ninja >= 1.6"] |
Docs: https://tuyaopen.ai/docs/quick-start/enviroment-setup
| Variable | Set by activation | Meaning |
|---|---|---|
$OPEN_SDK_ROOT | yes | SDK root path |
$OPEN_SDK_PYTHON | yes | venv Python executable |
$VIRTUAL_ENV | yes | active venv path |
Linux / macOS:
if [ -n "$OPEN_SDK_ROOT" ] && [ -n "$VIRTUAL_ENV" ]; then
echo "Already activated"
else
cd "$(git rev-parse --show-toplevel)" && . ./export.sh
fi
Windows PowerShell:
if ($env:OPEN_SDK_ROOT -and $env:VIRTUAL_ENV) {
Write-Host "Already activated"
} else {
Set-Location (git rev-parse --show-toplevel); . .\export.ps1
}
Windows CMD:
if defined OPEN_SDK_ROOT if defined VIRTUAL_ENV (echo Already activated) else (
for /f "delims=" %%i in ('git rev-parse --show-toplevel') do cd /d "%%i"
call export.bat
)
Ubuntu / Debian:
sudo apt-get install lcov cmake-curses-gui build-essential ninja-build \
wget git python3 python3-pip python3-venv libc6-i386 libsystemd-dev
macOS / Windows: see official docs linked above.
Run once per terminal session from the SDK root:
. ./export.sh # Linux / macOS
.\export.ps1 # Windows PowerShell
export.bat # Windows CMD
After activation: $OPEN_SDK_ROOT, $OPEN_SDK_PYTHON, $OPEN_SDK_PIP are set; SDK root is in PATH.
tos.py version # e.g. v1.3.0-23-g6bcb5aa
tos.py check # validates tool versions + runs git submodule update --init
Or run the bundled check script:
| Platform | Command |
|---|---|
| Linux / macOS | .agents/skills/tuyaopen/env-setup/scripts/check_env.sh |
| Windows CMD | .agents\skills\tuyaopen\env-setup\scripts\check_env.bat |
| Windows PowerShell | .agents/skills/tuyaopen/env-setup/scripts/check_env.ps1 |
| Symptom | Fix |
|---|---|
python3-venv missing | sudo apt-get install python3-venv |
Activation fails, .venv/ exists | rm -rf .venv/ && . ./export.sh |
tos.py: command not found | Re-run . ./export.sh |
| Submodule download fails | git submodule update --init |
[Unknown version] | No git tags — harmless |