nanoleaf

# Picoleaf CLI Use `picoleaf` to control Nanoleaf light panels. Setup 1. Find Nanoleaf IP: Check router or use mDNS: `dns-sd -Z _nanoleafapi` 2. Generate token: Hold power button 5-7 sec until LED flashes, then within 30 sec run: `curl -iLX POST http://<ip>:16021/api/v1/new` 3. Create config file `~/.picoleafrc`: ```ini host=<ip>:16021 access_token=<token> ``` Power - `picoleaf on` - Turn on - `picoleaf off` - Turn off Brightness - `picoleaf brightness <0-100>` - Set brightness percentage Colors - `picoleaf rgb <r> <g> <b>` - Set RGB color (0-255 each) - `picoleaf hsl <hue> <sat> <light>` - Set HSL color - `picoleaf temp <1200-6500>` - Set color temperature in Kelvin Examples - Warm dim light: `picoleaf on && picoleaf brightness 30 && picoleaf temp 2700` - Bright blue: `picoleaf on && picoleaf brightness 100 && picoleaf rgb 0 100 255` - Turn off: `picoleaf off` Notes - Default port is 16021 - Token generation requires physical access to the Nanoleaf controller - Multiple commands can be chained with `&&`