nanoleaf
Control Nanoleaf light panels via the Picoleaf CLI. Use for turning Nanoleaf on/off, adjusting brightness, setting colors (RGB/HSL), changing color temperature, or any Nanoleaf lighting control.
Source facts
- Repository
- Kernel8901/ai-agent-skills-classification
- Last source activity
- April 4, 2026 at 15:26
- Detected SKILL.md language
- English
- Stars
- 6
- Forks
- 1
Install options
The review-first prompt is selected by default. You can switch to a direct command or download a local copy.
Review the source files
Read SKILL.md and any companion files shown by SkillsMP before deciding whether to install.
File Explorer
2 filesShowing SKILL.md
SKILL.md
Source instructions · Read-only preview- name
- nanoleaf
- description
- Control Nanoleaf light panels via the Picoleaf CLI. Use for turning Nanoleaf on/off, adjusting brightness, setting colors (RGB/HSL), changing color temperature, or any Nanoleaf lighting control.
- homepage
- https://github.com/tessro/picoleaf
- metadata
- {"clawdbot":{"emoji":"🌈","requires":{"bins":"[Truncated]"},"install":["[Truncated]","[Truncated]"]}}
# Picoleaf CLI
Use `picoleaf` to control Nanoleaf light panels.
Setup
1. Find Nanoleaf IP: Check router or use mDNS: `dns-sd -Z _nanoleafapi`
2. Generate token: Hold power button 5-7 sec until LED flashes, then within 30 sec run:
`curl -iLX POST http://<ip>:16021/api/v1/new`
3. Create config file `~/.picoleafrc`:
```ini
host=<ip>:16021
access_token=<token>
```
Power
- `picoleaf on` - Turn on
- `picoleaf off` - Turn off
Brightness
- `picoleaf brightness <0-100>` - Set brightness percentage
Colors
- `picoleaf rgb <r> <g> <b>` - Set RGB color (0-255 each)
- `picoleaf hsl <hue> <sat> <light>` - Set HSL color
- `picoleaf temp <1200-6500>` - Set color temperature in Kelvin
Examples
- Warm dim light: `picoleaf on && picoleaf brightness 30 && picoleaf temp 2700`
- Bright blue: `picoleaf on && picoleaf brightness 100 && picoleaf rgb 0 100 255`
- Turn off: `picoleaf off`
Notes
- Default port is 16021
- Token generation requires physical access to the Nanoleaf controller
- Multiple commands can be chained with `&&`
View on GitHub