nanoleaf
Control Nanoleaf light panels via the Picoleaf CLI. Use for turning Nanoleaf on/off, adjusting brightness, setting colors (RGB/HSL), changing color temperature, or any Nanoleaf lighting control.
Datos de origen
- Repositorio
- Kernel8901/ai-agent-skills-classification
- Última actividad en el origen
- 4 de abril de 2026 a las 15:26
- Idioma detectado de SKILL.md
- inglés
- Estrellas
- 5
- Forks
- 1
Opciones de instalación
De forma predeterminada está seleccionado el prompt que primero revisa el origen. Puedes cambiar a un comando directo o descargar una copia local.
Revisa los archivos de origen
Lee SKILL.md y los archivos complementarios que muestra SkillsMP antes de decidir si quieres instalarlo.
Explorador de archivos
2 archivosMostrando SKILL.md
SKILL.md
Instrucciones de origen · Vista previa de solo lectura- name
- nanoleaf
- description
- Control Nanoleaf light panels via the Picoleaf CLI. Use for turning Nanoleaf on/off, adjusting brightness, setting colors (RGB/HSL), changing color temperature, or any Nanoleaf lighting control.
- homepage
- https://github.com/tessro/picoleaf
- metadata
- {"clawdbot":{"emoji":"🌈","requires":{"bins":"[Truncated]"},"install":["[Truncated]","[Truncated]"]}}
# Picoleaf CLI
Use `picoleaf` to control Nanoleaf light panels.
Setup
1. Find Nanoleaf IP: Check router or use mDNS: `dns-sd -Z _nanoleafapi`
2. Generate token: Hold power button 5-7 sec until LED flashes, then within 30 sec run:
`curl -iLX POST http://<ip>:16021/api/v1/new`
3. Create config file `~/.picoleafrc`:
```ini
host=<ip>:16021
access_token=<token>
```
Power
- `picoleaf on` - Turn on
- `picoleaf off` - Turn off
Brightness
- `picoleaf brightness <0-100>` - Set brightness percentage
Colors
- `picoleaf rgb <r> <g> <b>` - Set RGB color (0-255 each)
- `picoleaf hsl <hue> <sat> <light>` - Set HSL color
- `picoleaf temp <1200-6500>` - Set color temperature in Kelvin
Examples
- Warm dim light: `picoleaf on && picoleaf brightness 30 && picoleaf temp 2700`
- Bright blue: `picoleaf on && picoleaf brightness 100 && picoleaf rgb 0 100 255`
- Turn off: `picoleaf off`
Notes
- Default port is 16021
- Token generation requires physical access to the Nanoleaf controller
- Multiple commands can be chained with `&&`
Ver en GitHub